Question about Whirlpool RBS275PD Electric Single Oven
Why won't the elements come on?
There is a thermal relay on the rear of the oven that tends to blow during self clean cycles. It is the most likely problem.
Remove the oven,turn off the power,remove the rear panel to access the thermal relay.It is not re-settable. It must be replaced.
Posted on Oct 01, 2009
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If the electronic control is blank then an inline fuse to the control has blown due to overheating in the area of the controls. If the controls are visable but nothing in the way of high voltage works then that is the limits in the rear of the ovens.
Posted on Feb 15, 2010
SOURCE: self-clean not cleaning
I was wrong (I think). the baking element probably was burnt out as the repairman said. He replaced it and I thought selfclean still wasn't working. In fact, I think I just had to give the self-clean function more time. Also, I was judging by smell. We have become used to a bad odor during self clean which was missing when it was broken and still missing after the repair. Bottom line, the oven was clean after the baking element was replaced, sans smell.
Posted on Apr 22, 2008
Probably the Thermal Overload Sensor burned out from the excessive heat during the cleaning cycle. It Is located on back side of oven.
Posted on Oct 18, 2009
SOURCE: The power won't come on
Hello, Thank You for using FixYa. I will be helping you today.It blew the thermal fuses one on the back and one on the control replace both even if its just one.The one on the back top oven is part 9759243 and the control one is 4456654. For the back one you have to pull the oven out and the control one remove the front side rails then the control side screws to open the control
Thank You and please rate my answer if it was helpful..
Posted on Jun 11, 2011
Hello there and welcome to Fixya
This is a fairly common problem with self cleaning ovens
The problem normally is that the user has interrupted the clean cycle and the door is locked by default or the door lock assy has failed all together .
Now here is the thing these ovens have a built in memory module that stores a number of commands that the user has input in it like self clean or broil ect.ect so what you will have to do is to clear the memory and it is done like this.
First unplug the oven and do not touch it leave it sit for a minimum of 1 hour this will reset the memory module
Now only after the hour is up plug in the oven and you may hear a beep ora click if so great wait a few min then you can press the cancel button then try to open the door again.
Now if this has not worked then you will have to remove the top part of the oven to get to the latch asy which means you may have to remove part of the back of the oven or the entire back piece depending on your model to be able to remove the screws that hold in the top of the oven on the back then you should be able to see the latch mechanism
Now remove it and have it tested or simply replace it ok
Hope this helps please keep me informed on how this is going i can send you a link to a site that has a video on how this is done if needed ok to help you repair this
Best regards Mike
Posted on Nov 19, 2011
Tips for a great answer:
Mar 06, 2013 | GE Ovens
Jan 08, 2012 | GE Profile JTP18 Electric Single Oven
Oct 09, 2009 | Ovens
Sep 29, 2009 | Whirlpool RBS275PD Electric Single Oven
Aug 17, 2009 | GE Profile JTP56 Electric Double Oven
May 28, 2009 | Whirlpool GBS277PRS Stainless Steel...
Sep 23, 2008 | Thermador Professional Series PO301...
Apr 19, 2008 | GE Profile JTP18 Electric Single Oven
80 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: