Question about Cameras

2 Answers

I am attempting to burn my edited project to a DVD and I am getting this message "invalid workpath enter an existing workpath and preserve original setting in the preferences dialog box.

Posted by on

  • audreys958 Oct 01, 2009

    This may be the problem, I am editing video on my HP laptop as I travel and am away from my docking station. I tried to save all of my video clips on my docking station last week and didn't think I was successful, but apparently I was. I will be back in my office and able to try to produce my video with my laptop and docking station tomorrow. Hopefully if I save the video to my F drive (my docking station) I will then be able to produce a DVD. Thank you for your help. Hopefully I won't need you tomorrow.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,564 Answers

You will have to have saved the project in it's "correct file type" to your movie editor or your harddrive.

Posted on Oct 02, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,741 Answers

It happens if you are trying to burn the shortcut of the folder that is actually saved on other location. just try to burn the project from the location where it is actually saved and not from the shortcut. Otherwise copy the whole project on the other drive of your pc and try burning it from that location.just see that you actually copy it to other drive and not just put a shortcut to other drive.
thanks,keep updated and please do rate and accept the solution.

Posted on Oct 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to finalise dvd in real burner


1 Open the DVD creation software of your choice. Exact steps will vary based on the software you choose. Nero and Sonic are two popular choices.

2 Create a new DVD project or open an existing project. You will need a blank DVD or an un-finalized DVD with an existing project on it in your DVD burner.

  • 3 Add any files to your project. All programs have an "Add Files" and "Browse" button in order to add files. To remove any files, select the files in the list and press "Delete." Be sure your project is exactly like you want it before proceeding.

  • 4 Press "Burn" to burn you project or changes to DVD.
  • 5 Press "Finalize" or "Finalize Project" when prompted. There will be a prompt after the burn process has completed. If you don't see a prompt, look at the options menu that is to the left or top of the screen. Select "Finalize" or run your mouse over the toolbar buttons until you find the "Finalize" button. Select or press "Finalize" to finalize your DVD project. Select "Ok" or "Yes" to confirm.
  • 6 Eject your DVD and test it in a regular DVD player. A regular DVD player is one that doesn't burn DVDs and is more than likely a portable DVD player or one that is connected to your television.

  • BMW Brake Kits



  • Jun 07, 2012 | Sony BDP-S470 Blu-ray Disc Player

    Tip

    How to Burn Videos to DVD on Mac?


    Aimersoft DVD Creator for Mac can help you make DVDs on Mac OS X. Now you can burn your downloaded movies, self-made videos, and digital picture slideshow to DVD disc, DVD Folder, ISO or even DVDMedia. Here is a quick step-by-step guide to get you started.

    First, free download, install and launch Mac DVD Creator (Intel Version), choose “Create a New Project” and then follow these 4 steps:

    Step 1. Load Files (pictures, photos, slideshows, videos, movies……)
    Click the “+” button and select the target files you wish to burn, or just drag files to the program. Then the loaded files will be shown in thumbnail in the file list.
    9482b93.jpg
    Tip: You can merge, split or re-arrange them by dragging freely according to your preference. And you can also manage your files with the 4 buttons (add, delete, down, up).

    Step 2. Edit Files (Optional)
    Edit function is available to both videos and slideshows. Highlight a file and click “Edit” to enter the edit interface.
    22c4ae6.jpg
    Tip: You can edit video and movie files - crop, multiple trim, adjust effects, add watermarks and rotate functions.
    83b383d.jpg
    Tip: You can edit picture slideshow files - set the transition effects, add text and background music to make them more personalized and eye-catching.

    Step 3. Customize DVD menu (Optional)
    Click the “Menu” button on the lower right bottom of the main interface to enter the menu editing window. Choose a pre-set dynamic template or static templates. Advanced Setting for customizing is allowed.
    For animated template, you can freely change the title miniature and the background music by clicking the “Advanced Setting” button. And free to download more animated DVD templates.
    For static template, you can customize the frame, the play button, the video name, the background picture and music of the DVD menu.
    77959eb.jpg


    Step 4. Start to burn
    Aimersoft DVD Creator for Mac provides four output choices: DVD Disc, ISO file, DVD Folder (Video_TS) and DVDMedia file. Choose an output format according your own needs and set proper output parameters to start burning your files.
    3b6a7a8.jpg
    Note: if you don’t want to burn your files immediately, just save them as a project file, which can be reloaded next time for further editing and burning.

    Done!! Enjoy the videos on your big screen DVD player now!

    on Jun 02, 2010 | Computers & Internet

    Tip

    Download YouTube Videos to DVD on Mac OS X


    Question:
    “I downloaded a YouTube video and have it on my Mac in mp4, avi, and mov files. I have tried burning these to a dvd+r DVD and none have worked on either the DVD player or a play station 2,does anyone knows of any way for me to get it to work or any other burning disks that should work”
    Answer:
    “You need specific software for it to be able to work on your DVD player. For example, I personally use Daniusoft DVD creator for my mac.it can convert video formats like MP4, AVI, M4V(without DRM protection), MPA, MPG, MPEG, MOV,3GP, 3GP2, FLV, VOB, DAT, TS, and picture formats like PNG, JPG, TIFF, BMP, TIF, JPEG to DVD disc for portable and home DVD players on Mac OS X.TP.”
    deba6da59de270ff_youtube-to-dvd.png YouTube is the leader of online video, sharing original videos worldwide through a Web experience. Most of us go to YouTube website to watch YouTube videos in spare time. But have you thought about downloading videos from YouTube and watch them on your mobile players or share with your family members on your home DVD players TV Sets?
    The following are the detailed steps to get the job done:
    Step 1. Download web videos from YouTube
    There are some free alternatives. You could try this free YouTube Downloader for Mac. It’s totally free .you can free download videos from YouTube and other online video sharing website such as Google video, Yahoo video, Hulu video, Myspace,vimeo and so on.
    Step 2. Install and Run YouTube Video to DVD Burner for Mac and then load the YouTube video.
    Install Daniusoft DVD Creator for Mac, click the “+” button at the upper right corner to load the YouTube Video files. You also can directly drag the YouTube video to the program.
    Step 3. Edit YouTube video File
    You can trim and crop the added YouTube files and adjust the effects before burning YouTube videos to DVD on Mac OS X.
    Step 4. Design DVD Menu
    This YouTube video to DVD burner for Mac allows you to create your own DVD menu with various built-in resources. Click the Menu button on the bottom right of the main interface to edit the DVD’s menu.
    Step 5: Previewing the Project
    After finishing all the editing, you can click the Preview button on the main interface to preview your DVD project.
    Step 6: Burn YouTube to DVD on Mac
    After you choose the correct DVD disk and the suitable video quality, you can click the Burn button to convert YouTube video to DVD, burn YouTube video to DVD.
    At this step, you can choose burn YouTube Video to DVD (DVD–5 and DVD–9; DVD-R, DVD+R, DVD-RW, DVD+RW, DVD+R DL, DVD-R DL, DVD-RAM), DVD Folder and ISO File as you will. If you want to burn your project directly to a DVD disk, you can select the “DVD” option.

    on May 21, 2010 | Computers & Internet

    1 Answer

    I receive "failure writing to disc" message as I try to burn slideshow to dvd within the program


    SlideShow Expressions can develop problems when the photos are too large and when the project your trying to burn is quite large as well. What is too large? I can only speak from own experience. I found that once a project gets into the range of 400 or more photos (total) my writer fails to write. (However, I've burned projects containing up to 388 successfully; photos at original size.) This can be solved by resizing your photos. I have a project with 466 photos (10 chapters) that wouldn't burn to disc. I then resized the photos so that every single one was under 500 KB. It worked: burning is now successful. Resizing doesn't necessarily mean that the quality of your photos will drop. I used Microsoft Office Picture Manager and, really, visually there is no difference between the original photos and the resized photos in the slideshow project. Experiment with photo size. Maybe another size works for you. It is also known that chosing the archive option (having the original photos and music burned to the disc) can upset the burning process - but only really when it's a very large project. Also, you could be using the wrong type of disc. I've been using DVD+R.
    11407336

    May 20, 2010 | Individual SlideShow Expressions

    1 Answer

    Error message when attempting to create a DVD


    Try to burn your programs using a different burning software like nero or etc.

    Nov 08, 2009 | Microsoft Windows XP Media Center Edition...

    1 Answer

    When I try to burn my project to the DVD I am getting this message. "Invalid workpath. Enter an existing workpath and preserve original setting in the preferences dialog box.


    I had to have my laptop connected to my docking station F drive in order to burn a DVD from the video I created away from my docking station.

    Oct 01, 2009 | JVC Everio GZ-MG30 Camcorder

    2 Answers

    DOES NOT BURN DVD; AT END OF BURN "ERROR" MESSAGE W/ NO INFO


    I see that you are using a DVD+R disc...Some drives can only do + or -. Have you tried using a DVD-R disc? You could also check and see if there is a firmware update from the NEC website.

    Sep 05, 2009 | NEC ND-6500A DVD±RW Dual Layer Burner

    1 Answer

    Not able to install XP on 845 zebronic motherboard Help


    In order to install XP, check the following:

    For most newer motherboards, your install CD must be Windows XP with Service Pack (SP) 2 or 3. If you have an older copy (SP1), it will lock up in a "Blue Screen of Death" during the install.

    The install also requires a Microsoft version of Windows. If this board is a replacement in an existing PC and you are attempting to use a restore CD that came with the PC (marked Dell, HP or whatever brand), it won't install on anything other than the original motherboard.

    If you have the Genuine Windows license code (usually located on a hologram sticker on the side of the PC case), you don't need to buy a new copy/license. Ask any of your geek-savvy friends if they can burn you a copy of XP with SP2 or SP3. This should work.

    Finally, after installing you may get a message stating you've entered an invalid license code. If this happens, call the "800" number that pops up and explain you've replaced a defective motherboard - Microsoft should give you a new activation code at no charge.

    Hope this helps.

    Mar 07, 2009 | Intel Motherboard

    1 Answer

    Error when attempting to write disk


    Sometimes the driver that is used to burn CD's gets corrupted, you should try removing and re-installing roxio. The only other possibility is a bad CD burner drive, but these are dirt cheap to replace these days, you should easily be able to find one under 40$.


    Jan 20, 2009 | Roxio Easy CD & DVD Creator 6...

    1 Answer

    CANNOT INITIALIZE API - REINSTALL THE SOFTWARE


    When you installed the 5.0 in, did you put the update in also?

    ecdc_v53.5.10 basic_enu

    You will need this or 5.0 will not run.

    Mar 30, 2008 | Roxio Easy CD & DVD Creator 6...

    Not finding what you are looking for?
    Cameras Logo

    Related Topics:

    17 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cameras Experts

    kakima

    Level 3 Expert

    102366 Answers

    Steve

    Level 3 Expert

    3287 Answers

    yadayada
    yadayada

    Level 3 Expert

    76109 Answers

    Are you a Camera Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...