Question about Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

I have lost channels 5,itv 3,and itv 4,and do not know how to retune my tv, all other channels appear to be alright slightly confused when i press the menu button and not know which links to follow?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 54 Answers

All Freeview channels need re-tuned after 30th September.
To re-tune your Sony TV...

1.Press Menu button then go to settings...

2.Scroll down the menu icons until you get to 'Digital Set-up'

3.Press enter/centre key next to direction arrows

4. Select spanner icon and digital audio tuning.

5. You will then be asked if you want to start digital audio tuning.

6. Press enter/centre button....and thats it!.... TV will automatically re-tune.

Posted on Oct 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why can I not receive ITV channels


This could be too much signal thanks to the Freeview retunes going on. Your aerial is more sensitive at some frequencies, so there's more signal power higher up the frequency range. The signals for BBC and ITV are among the strongest ones broadcast. If they are now at a point on the aerial's range where they are too strong for the TV then the tuner will over-saturate. The result is the same as no signal.

A simple and inexpensive diagnosis tool is a variable attenuator. The MA1620 on this page is perfect for that job:
Splitters amplified splitters and attenuators

It will give you a way to reduce the signal level at one TV without affecting the other TVs in the house.

Sep 08, 2014 | Televison & Video

1 Answer

Loss of some channels on 32LD30U B


Weak digital signal. Either antenna or tuner.

May 03, 2010 | Televison & Video

1 Answer

Cant get any itv channels after retuning my new tv because of bad reception on itv channels.its a new aerial and the tv in other room ok its HITACHI 26ins L26HPO3U


in the manual i noticed a note about the active antenna and it should be showing not active when standard antenna is used.i also tried channel scan instead of first time installation which i tried a few times.so i dont really know which worked,just kept trying.

Jan 04, 2010 | Televison & Video

1 Answer

I have tried to retune my tevion lcd 1507id because of the change in the granada area. The tv retuned but i have no itv, channel4 or channel 5


These will have been rolcated to a different channel number. You can select the programme guide & scroll through all the channels until you find thier new location number, then you could either take note of these new numbers or go into the set up menu where you can re-arrange the channel numbers back to 4/5 etc or set them on your favourites listings

Dec 08, 2009 | Televison & Video

1 Answer

Hi I have just retuned my tv but have found that the identity number(ie BBC1 is D.001, ITV is D.003) for channel 5 is D.800 which Guide plus uses but the TV recognises channel 5 as 005! therefore I cannot...


The retuning process is as follows:

  1. Press the [i+] or MENU button on the remote control to display the DIGITAL INFO menu.
  2. Press the BLUE button to display the MAIN MENU.
  3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
  4. Press the RED button to start the auto tuning process for all available digital channels.
  5. Wait for the process to complete.

If you wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Oct 03, 2009 | Sony KDL-26S2010 26 in. LCD Television

1 Answer

Hi I have my Dad KD28DL10U tele as he has got a new one. He had satellite I dont. I cannot get itv or channel 4 on TV, also have lost 5 now that it needs to be retuned. Can you help me please. Alison


Auto program. rescan channels on your TV input. The TV has been scanned on the satellite it is set to pick up the channels that are avaliable on that system.

Oct 01, 2009 | Sony FD Trinitron WEGA KV-27FS100 27" TV

1 Answer

Lost ITV channels and C4


I think you need to get Sky because it will give you 100% coverage of all terrestrial channels. You may need to retune the television otherwise just get sky

Dec 31, 2008 | LG 32LX1D 32 in. LCD Television

1 Answer

Loss of freeview channels


The retuning process is as follows:

  1. Press the [i+] button on the remote control to display the DIGITAL INFO menu.
  2. Press the BLUE button to display the MAIN MENU.
  3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
  4. Press the RED button to start the auto tuning process for all available digital channels.
  5. Wait for the process to complete.

If toy wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

Feb 08, 2008 | Sony KDL-26U2000 26 in. LCD Television

2 Answers

Tuning grundig tv - tp623


Using ACP (Auto Channel Programming) Press and keep button P/C pressed for approx 3 sec. ACP and the channel number appear on the screen. Indications in red letters are activated. Press button< YES is activated.
Screen will display SEARCH - STORE YES< > NO
Once you have the channel you want, activate STORE then <YES
This instuction booklet covers P40,P45 and P50 with remote model tp623

Sep 22, 2007 | Televison & Video

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-32FS120 32" TV Logo

629 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...