Question about Pioneer AVIC-N2 Car DVD Player
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You need to identify the four wires that carry the DVD audio in the factory plug, and re-wire them to RCA plugs that can be used with the Auxiliary input RCA jacks on your Pioneer unit. The four wires should be: Left (+) light green Left (-) white Right (+) red Right (-) black The easiest way is to purchase some inexpensive RCA cables (or better yet, speaker wire with RCA ends). Cut the cables and wire the center pin conductor wires to the (+) audio wires in the stock plugs, and connect the outer shield conductors to the (-) wires. Then connect the RCA plugs to your head unit's auxiliary input jacks.
Posted on Aug 08, 2007
SOURCE: z2 install
Thats an expensive installation the harness alone is over 120 dollars. You will lose your onstar unless you get a onstar integration module. You will also have to bypass your amp
Posted on May 29, 2008
you need to go into your audio menu or function menu and turn off ASL. this is a circuit that is meant to adjust the volume for you automatically depending on road noise.
Posted on Dec 19, 2008
Tips for a great answer:
Jul 07, 2009 | Pioneer AVIC-Z2 Car DVD Player
Mar 19, 2009 | Pioneer AVIC-S2 GPS Receiver
61 people viewed this question
Usually answered in minutes!