Question about Computers & Internet

2 Answers

I have a new mainboard Intel DQ45CB, after installing all components, PC was started, stopped and again started (automatically), but nothing graphic output (VGA, DVI), after removing all memory, mainboard not beep. I have second new mainboard with same problem.. What's wrong, please Thanks

Posted by on

  • jkavon Oct 02, 2009

    I think, our (old) processor is not for this mainboard.
    We have installed processor Intel(R) Pentium(R) D CPU 3.40GHz. This processor is for the same socket LGA755

  • For Old Hack May 11, 2010

    This has a new socket design on the motherboard. Take the heat sink off, and look how the CPU is seated. What is the wattage on your powersupply? Check here:http://www.intel.com/products/desktop/mo... If its powerfull enough

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 329 Answers

Problem is with your installation.....try installing windows again with proper formatting of hard disk.....

Posted on Oct 01, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

YOU! Solved your own problem. That processor Pentium D 3.4GHz is not supported on that motherboard: List if supported processors

http://processormatch.intel.com/CompDB/SearchResult.aspx?BoardName=DQ45CB

Excellent work!

Posted on Oct 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

N 1996 vga drivers


Hello msi n1996 is not a genuine msi board. This mainboard was made for HP/COMPAQ as a OEM product, and some other manufactures including the brand: MEDION.
There is no drivers to be found at the msi site.

You have to visit the manufactures site of the pc, not the mainboard.

The HP site is here:

http://www8.hp.com/us/en/support-drivers.html

Enter the pc model number, or sku number from the back of the pc.

There could be different drivers for the graphic, depending of the manufacture of the graphic card. It could be a nvidia or a intel driver.

Visit intel here:

http://downloadcenter.intel.com/

And run the driver update utility.

Try also to install Speccy:

http://www.piriform.com/speccy/download

To find out what graphic card that are installed on the mainboard.

An easyer way to make the graphic work, is to install a graphic card on the mainboard, in the AGP slot.
Just make sure you have the driver for your windows system.

A second helpfull option could be installing this software:

http://www.driveridentifier.com/

And run the program, for a driver seach.

But you have to create a user profile, and a valid email address, to download the driver.

Hope this will help you

Feb 22, 2013 | Computers & Internet

1 Answer

My pc Restatred when install graphic draiver.


Hello here is the homepage:

http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%C2%AE+5+Series+Chipset+Boards&ProductProduct=Intel%C2%AE+Desktop+Board+DH55TC

That`s a normal procedure, because the graphic driver, is an important system file. Like the sound driver also, and other files for the mainboard.

Good luck

Jan 21, 2013 | Intel DH55TC Desktop Motherboard Intel...

1 Answer

My windows 7 displaying windows stopped while working on pc?


Hello please select the right mainboard here:

http://www.simmtronics.com/simtron/index.php?option=com_content&view=article&id=51&Itemid=58

In order to get the right driver.

The driver has be unziped before you install.

If the driver does not fit your windows system install a better graphic card on the mainboard instead of useing the onboard graphic.

Just make sure the windows system is supported.

Good luck

Dec 15, 2012 | Computers & Internet

1 Answer

GPU hardware not recognised


Hello the homepage is here:

http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=583#dl

Try to download a manual if you don`t have it.
If any drivers for the mainboard is missing install them.

Install the newest NVIDIA graphic driver from here:

http://www.geforce.com/drivers/results/49949

This is the 64 bit version.

Check also if the graphic card is properly insertet
in the slot on the mainboard.
And the graphic card has to support PCI-E X16
This graphic card needs extenal power
from the power supply to work
the power supply has a wire with pci-e stamped in did you connect this ???.

Try to disable the onboard graphic in the device manager.

Good luck

Nov 15, 2012 | Biostar TZ75B ATX Intel Motherboard with...

1 Answer

Intel graphics driver has stopped working and blue screen appears


Hello you have to visit the manufactures PC homepage to update your drivers.
Blue screen of death means you have a bad driver or not installed.
Are there any warnings in the device manager ???
Typical a yellow triangel

Try to start in failsafe mode by pressing F8 under restart
and select boot with network support.
Enter the controlpanel and select the device manager
Open the graphic submenu
Here you can see what driver you have.
If it is a INTEL you can renew the driver from here:

http://downloadcenter.intel.com/

And enter the mainboard number.

You can also try windows update it sometimes find the driver for you.

Good luck

Oct 29, 2012 | Computers & Internet

2 Answers

My b3410 neo basic dual core always diplay that the driver has stopped responding and has recovered what this?


You Display driver is having some issue. either it may be not updated or its file are corrupted. I'll suggest you to uninstall your Display driver completely from your computer and download latest Display driver from particular website and install it. this way it'll solve your problem.

Aug 10, 2012 | Sylvania Computers & Internet

1 Answer

PC wont boot


Check your specs for this one on your Card (should be on the box or in your included documentation), but I believe your card is PCIE v2.1. If this is the case, your card won't work. Your mainboard is an older one, and you can tell by the black PCIE slot that it is only PCIE 1.0. NOTE: PCIE v2.0 cards will work with PCI v1.0 as long as they meet power requirements, etc. (yours should be fine) but there are no updates to fix this on your mainboard. Time to dig out your receipt and look over the return policy. Again, a PCI v2.0 should work OK, just not the v2.1 cards.
Please take a moment to leave feedback if I helped you out today.

Jan 27, 2012 | Sapphire RADEON HD 6750 1 GB DDR5...

1 Answer

Build new pc gigabyte gtx460 1GDDR5 i5 2500K asus p8p67 m pro corsair 650W no viedeo output by turning on PC


Hello there, I am the Expert that will be helping you today, my name in damnor01.

Welcome to Fixya.

Remove the Graphics Card and connect your monitor to the onboard video(VGA) of your computer mainboard.

Now power on, if all works then the Graphics card is faulty etc...
If the PC still does not POST you might find that the computer mainboard is faulty.

However Intel has announced that the Intel P67 Mainboards and being recalled!!!

You need to contact the place of purchase, you will receive a credit or a replacement mainboard.

Contact them as soon as possible!
Your computer skills are excellent, Intel has a bug with the SATA2 3Gbps Ports, They die and then your board is dead.
What i am saying is it's not your fault!

Thanking you!
damnor01

Feb 07, 2011 | Gigabyte Super Overclock Series...

2 Answers

My gateway essential 400 cant run newer programs **** *** window 7... or explorer 8... or flashplayer 10... how can i upgrade my computer 2 make it run these programs ? a new hard drive ? or what do i do...


Hi,

You can add hard drive if your system doesnt have enough space for the new programs. If the new programs installs well but is running slow or not starting, then you will have to upgrade your RAM and for better performance, fix one graphics card suitable for *********** board. If you can spend more, Upgrade *********** board and processor.

Thanks
Sherbaz

Sep 20, 2010 | Gateway Essential 400 PC Desktop

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...