Question about Samsung PS42P2S 42 in. Plasma Television
Please can you supply me with the correct code in order to operate this remote control with my 42" Samsung PDP-Television
I cannot find a model no for it .
All the code numbers listed in the code list for the remote will not operate the TV
I assume the product selected is the correct one
Unless you haven't tried the suggested 000-??? for a Samsung tv then you're out of luck. Remote codes are supplied by the manufacture to go with units. If the codes they give don't work, then there are none.
Posted on Mar 08, 2008
Tips for a great answer:
Jan 13, 2016 | Sanyo 42 in. LCD TV
May 13, 2015 | Samsung Flat Panel Televisions
The One For All 6-Device PVR Universal Remote Control
is preprogrammed at the factory to operate an RCA TV,
VCR, and satellite receiver, a Philips Tivo PVR, a Toshiba
DVD player, and a Pioneer audio receiver/amplifier.To
control devices other than the default brands,perform
the following steps; otherwise skip this section:
[*] Turn on a desired device (e.g.,VCR or
DVD player) and, if applicable, insert
media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely
before proceeding.Highlight or write down the
codes and device you wish to program before
starting step 2.
[**] On the remote control,press a device key
once (i.e., TV,PVR,DVD, CBL/SAT,AUD,or VCR).
NOTE: To program control of a cable box or
satellite receiver, press CBL/SAT once.
NOTE: To program control of a CD player or
audio receiver, press AUD once.
NOTE: To program control of a TV/VCR Combo,
press VCR once.After programming, you will be
able to control channel selection, volume, and
NOTE: To program control of a TV/DVD Player
Combo, press DVD once.After programming,
you will be able to control channel selection,
volume, and DVD functions
[***] Press and hold SET until the LED (red light)
blinks twice, then release SET.
[****] Use the Manufacturer's Codes of device and
brand name and then enter the first fourdigit
code for your device. If performed
correctly, the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps
2 through 4 and enter the same code again.
[*****]Aim the remote control at the device and
press POWER once.The device should turn
off. If it does not, repeat steps 2 through 5,
trying each code for your brand until you
find one that works.
NOTE: If the device does not have a POWER
key, press the (Play) key
[******]Repeat steps 1 through 5 for each device you want to control.
Jul 03, 2011 | Samsung Flat Panel Televisions
Jun 14, 2011 | Flat Panel Televisions
Mar 01, 2010 | Insignia 42" LCD Flat-Panel HDTV
Jan 28, 2010 | Sanyo DP32746 32 in. LCD Television
Nov 12, 2009 | ViewSonic N4251w 42 in. LCD Television
Jul 13, 2009 | iLO 3200 32 in. LCD Television
Jan 30, 2009 | Norcent Technologies LT-2725 27 in. LCD...
199 people viewed this question
Usually answered in minutes!