Question about Olevia LT27HVX 27 in. LCD Television

2 Answers

Kids fooled around with the remote and got into the menue on firmware and canceled the normal set up. TV now will not allow automatic channel set up. No pictures just screen with channel selection blank and no way to enter channels. Help!

Posted by on

  • drgorndt Oct 01, 2009

    They evidently hit the factory reset by input and the confirm button which knocked out all of the programming on the set. now can only get channel select with no listing of channels and no way I can see to manually enter channels. When you hit the channel button and enter, it lists "jump to" then the channel but nothing happens/no input capabiities appear possible.

  • drgorndt Oct 01, 2009

    Was mistaken in the model number- gave me the wrong one over the phone (we have 2) model I am having the problems with is an OLevia 227 S11 also need manual for this unit. Could we readdress my problem?



    Dave

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,865 Answers

On the remote, there is an input button. click that and then go through the choices one by one until you have your picture back. once you have the picture back your remote will work properly again.

Posted on Oct 02, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 146 Answers

Here is what you need to do to get back to the original configuration: Setup > Factory Reset by Input, and confirm that you want to reset the settings.

If the reset you require is to correct a more serious issue, you may want to try an EEPROM reset. If you call Amergence Technology at 866-965-3842, their Level 2 Tech Support agents may be able to walk you through it.

I don't see where in your user manual that the kids can change the firmware, here is a link to an online copy of your user manual if you do not have one handy.

http://www.docstoc.com/docs/7202968/Olevia-LT26HVE-and-LT26HVX---User-Manual

Your best bet is to rest to factory settings that should clear everything up for you

Posted on Oct 01, 2009

  • Keith  Kalish
    Keith Kalish Oct 01, 2009

    Rather than using the remote, have you tried to do it from the keyboard on the TV itself?
    Can you use any of the other input, soucign from a DVD player?



×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

46 inch sanyo led tv won't allow menu to come up on screen.


well I cant be sure because you didn't supply a model number but some models of sanyo's allow one to parental lock the menu bar via password , this prevents kids/others from accessing the settings pages and the channel lock functions , also the key on your remote for menu might have failed as well could be another possibility .
if you have permission of the owner of the set one can preform a master reset if passcode is no longer known , then all your favorites and channels would need to be restored back in

Sep 23, 2015 | Sanyo Televison & Video

1 Answer

Television model tp2784c101 what is the remote control menu/set up to keep channel so it doesn't automatically switch to different channel after 30 seconds; or how can I set it up to turn onto AV1 an


If the TV do not respond to remote control; to change channels, there are many possibilities. Check the infrared emission of the remote control first. Check it with fresh batteries. If the infrared sensor inside the TV is faulty, this kind of fault can happen. In other words, your TV need a through check up, which a normal user can't do with ease. Contact any service technician; or the authorized service centre. Electro help

Nov 18, 2014 | Philips Magnavox 27MS343S 27" TV

1 Answer

We have no remote. Is there a way that I can get my tv to stop on channel 3? It just goes from channel 2 to channel 4 and does not allow 3 to come on -- skips right over it . I just need to use it for a...


it simply means that channel3 has been set to skip/go to the tuning menu and select manual search.select channel position3 and cancel channel skip function.

Oct 05, 2013 | JVC AV-32F703 32" TV

1 Answer

I just bought a 32bv701b. When doing auto scan no digital channels appear. My previous TV received them all fine. Help!


Do a retune to this TV.

Press MENU button on the remote control and select
Install and Retune by using Left or Right button.
Press OK button and the following menu screen
will be displayed

Select Automatic Channel Scan (Retune) by using
Up or Down button and press OK button. Automatic
Channel Scan options will be displayed. You can select
options by using Up or Down and OK buttons.

Auto Channel Scan Menu Operation
Digital: Searches and stores aerial DVB stations.
Analogue: Searches and stores analogue stations.
Full: Searches and stores both analogue and aerial
DVB stations.

Whenever you select an automatic search type and
press OK button, a confi rmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using Left or Right
and OK button.

After auto channel scan type is set and selected
and confi rmed, installation process will start and
progress bar will move along. Press MENU button
to cancel process. In such a case, located channels
are not stored. The television will start to search for
all available stations. You must allow the television
to complete the search.

Jun 13, 2012 | Panasonic Televison & Video

1 Answer

Tv has power but no picture. Go to menu set up and auto tuning but scans and advises no channels found. Can you suggest fix, grand kids were fooling around with remote so suspect something simple to fix. ...


you can either try this
- To initialize the adjusted values

1. Press the ADJUST button and then use D / E button to select the RESET option.

2. Press ENTER button and then use F / G button to select Yes.
3. Press ENTER button.

or this
.

1. Press the MENU button and then use D / E button to select the SETUP menu.

2. Press the G button and then use D / E button to select Main Input.

3. Press the G button and then use D / E button to select the source: DTV, Analog,

Video1, Video2, Component1, Component2, RGB-DTV (or RGB-PC), DVI-DTV

(or DVI-PC).

4. Press EXIT button to return to TV viewing or press MENU button to return to the

previous menu.


hope this helps


John

Jan 04, 2011 | LG DU-37LZ30 37 in. LCD HDTV

1 Answer

Lost manual. Cannot get HR A591U JVC VCR program to record a future cable tv program. Seems I have tried everything but it does not record as I set up. It will record an existing show by pressing...


Timer Recording JVC VCR HR A591U
Timer recording can be programmed on-screen with
the remote control. The built-in timer allows automatic
unattended recording of up to 8 programs within 1
month.

EXAMPLE: Program a timer recording for the 26th day,
channel 125 (CATV), 11:00 - 11:30 PM on timer program
number 1 (Tape speed: EP).

When a TV is connected with an audio/video cable, turn the
TV and this VCR on and select the video input mode on the
TV.


• After timer recording is completed, the VCR turns off
automatically.
• You can program the timer recording while a regular
recording is in progress; the menu screens will not be
recorded.
• The timer recording will start at 20 seconds before the time
you predetermined.

Press MENU on the Remote.
Check the “TIMER REC SET”
option is selected, then press
ENTER.

Press SET –/+ to select one of
the program lines, then press
ENTER.

Press SET –/+ to select the
date, then press ENTER.

Set the start time, end time,
channel and tape speed as in
step 3.
NOTE: To record from external
source, press SET –/+
and set the channel to
"L". "L" will appear next
to CH 125 (or 69).

To enter other programs,
repeat step 2 through 4. Or,
press MENU twice to return
to the normal screen.

Press TIMER on the Remote.
The power will go off, the
TIMER REC indicator ( ) will
light and the VCR stands by
for recording.

To cancel a program:

Press the SET –/+ to select the
“TIMER REC SET” option in the
MENU. Then press SET –/+ to
select the unnecessary program,
and press CANCEL to cancel the
program.

Aug 28, 2010 | JVC Televison & Video

1 Answer

My remote no longer works and I can't get the menu to come up so that I can reprogram my channels and get all of my cable channels. Right now I only get basic cable channels, even though I have full...


You will have to disconnect the TV from the AC outlet for a few seconds(10-20) then reconnect the TV and press power. You should get the start up menu after you get a picture. What you have to do is use the vol up/dn , chnl up/dn keys to select the autoprogram setting after chosing from cable or antenna signal. the enter key should be one of the DVD keys either play or stop or some other key, you'll have to experiment a little with it. There is an owners manual available at retrevo.com in case you need it, but I am posting a brief description stated in the manual on how to do this. Chapter Summary: The STARTING SETUP function makes installing your TV/DVD easily...It leads you the Language selection, TV/CABLE selection and auto channel memory automatically...... Make sure that the antenna or cable TV system connection is made... ENTER CANCEL... Starting setup... Press POWER...The starting setup function begins and the Language setup menu appears on the screen...Press or to select your desired language, then press ENTER...... Users also looked at: Press or to select the “AUTO CH MEMORY”, then press...... 5S10101A [E] (P13-23) 23... This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels...In addition to normal VHF and UHF channels, this TV/ DVD can receive up to 113 Cable TV channels...When shipped from the factory, this selection is in the CABLE position...... Press or to select “TV” or “CABLE...... Press MENU in the TV mode, then press to select option...... Cable TV chart... Press or to select “ADD” or “DELETE”, whichever function you want to perform...... The chart below is typical of many cable system channel allocations...... Press or to select “TV/CABLE...... Press press... TV/CABLE selection Automatic memory tuning... TV/CABLE AUTO CH MEMORY ADD/ DELETE... or... to select “ADD/DELETE”, then...

May 19, 2010 | Toshiba MD20F51 20 in. TV/DVD Combo

1 Answer

How do you open the menu to do an auto channel scan on a zenith H2521Y3 without a master remote. It is an old ''hotel tv'' that I ''thought'' I got a good deal on.


These hotel t.v use a particular remote so that customers can`t fool around with the setup,You may be able to get an eeprom i.c for a similar chassis from a local repair shop, but then your set may need some adjustment through the service menu i.e vertical and horizontal size, a local tv repairman may be able to help you there. good luck

Nov 12, 2009 | Zenith C27A24T 27" TV

1 Answer

How to change channels to channel 3 without remote?


Will your tv allow you access to the menu from the front of the set? (try holding down different combinations of buttons on the front of the set if there is no menu button) If you can get into the menu, run the automatic channel memory feature. Make sure the device you want to see on channel 3 is on and connected to the set. (if it's a vcr make sure it's in vcr mode) This should find the device and set your tv to channel 3. Use the channel buttons on the front of set if its not right on ch3.

Sep 08, 2008 | Zenith Televison & Video

2 Answers

Grundig colour tv lost digital channels


there is prob in tv cicuit . memory ic may be curupt . if u r not a tv technician then connect a tv engineer

Mar 03, 2008 | Grundig GF70-600 TV

Not finding what you are looking for?
Olevia LT27HVX 27 in. LCD Television Logo

444 people viewed this question

Ask a Question

Usually answered in minutes!

Top Olevia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74198 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you an Olevia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...