How do i take the clear veiw window off of my bissell proheat carpet cleaner to clean it? I've removed the 2 screws on either side but it still wont come off.

How to Replace the Belt & Brushroll on Bissell ProHeat 2X ...

? 2:11
https://www.youtube.com/watch?v=Jj_43IHz9U4
Dec 28, 2012 - Uploaded by eVacuumBags
How to Replace the Belt & Brushroll on Bissell ProHeat 2X Series Carpet ... How to Replace Bissell Deep Cleaner Pump Belt orBrush Belt - Duration: 1:44. ... Won't SPRAY solution Rollers spin Fixing Bissell ProHeat Carpet ...

Brushes Will Not Rotate Deep Clean Essential - YouTube

? 0:53
https://www.youtube.com/watch?v=gbEXY5jkWSc
Apr 9, 2015 - Uploaded by BISSELL
If your machine is turned on and in the upright position yourbrushes will not turn. ... How to Replace the Belt & Brushroll on Bissell ProHeat 2X Series Carpet ... Won't SPRAY solution Rollers spin Fixing Bissell ProHeat Carpet ...

bissell pro heat 2x brushes wont spin Questions & Answers ...

www.fixya.com > Forum > Tags

... bissell pro heat pet 2x and my brushes won't turn or operate... check the belt belts ok brushes won't turn/rotate turn dial on bottom front on the water tank to ...

Check your User's Guide for filter locations. Bissell Consumer Care 1-800-237-7691

Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101
bnm

take the 2 screws out near the front outside edges then just lift it off

Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101

gfhjdhg

just lift it up probably suction holding it

Contact the Bissell services in your country - most of the Bissell sites (www.bissell.com) for example have Adobe user instructions of which you can download.

Bissel proheat turbo 2x ipx4.

I don't have the instruction the this machine if you could help me with where to put the water and cleaning solution and how much, also how to use it.

Thankyou,

Please email me at [email protected]

Take the front piece off, there is one screw in the center of it, on the top, Then remove the 2 clear covers, one on each side. then you can get in there to clean the brushes, also can take them off if you want to.

Don't remember being any special screws. Bissell usually uses phillips head or cross point screws.