Question about Crane Plumbing Toilet To Go Tall Elongated Toilet

1 Answer

My toilet takes like 15 min to fill? have a geberit assembly in tank.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 267 Answers


Sounds like the fill valve is the problem, you can change them literally in 10 minutes.

thank you for using fixya,rate my answer

Posted on Oct 01, 2009

  • Nooooo May 30, 2013

    So HOW do you change them? This answer is useless. I can\'t find a SINGLE place online that will show me a clear diagram of what I\'m facing behind the flush panel and show me what I have to do to get water to run into the tank in under SIX hours! This started within a few months of the bathroom remodel. I flush the thing with a bucket all day long and can only use the tank to flush it in the morning and at night, when it\'s had all day or all night to fill. Ridiculous. Building manager throws up his hands and says he doesn\'t know how to fix these toilets. I can\'t afford a plumber. If this were a normal toilet, I\'d have fixed it in minutes, but I don\'t even know what I\'m looking at behind that flush panel.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hi I have a geberit cistern with hissing noises and tank keeps topping up occasionally

wait for the new washer/ valve to settle in
or turn down the inlet water tap a bit

what does this really mean
tank topping up with water and re filling occasionally

in the wrong way or too tight or the wrong part ?


Nov 09, 2016 | Home

1 Answer

My geberit model number 131.028 dual flush won't shut off with water and leaks into the toilet bowl

How old? Who installed? Any warranty? I'd follow that route first.
If not warranty I'd try to get the installer to be interested. Perhaps he will have a "red face" an help out.

Feb 27, 2015 | Geberit 131.028.SJ.1 Black Glass Monolith...

1 Answer

Tank take 0ver 10 mins to fill

What about sand? There may be a screen in the filler that is dirty and needs to be cleaned.

May 11, 2013 | Jacuzzi Bath Perfecta EZ33 959 White round...

1 Answer

How do you adjust the fill level for a geberit fors inlet valve

A "Geberit FORS Inlet Valve" is not a dishwasher part. It is a fill valve made for a toilet cistern. You adjust it by removing the valve, removing the blue "locking clip" on the lower part of the valve body, then rotating the valve body to make it longer/shorter (and hence raise/lower the height of the large float body on the side of the valve). Once done, reinsert the lock clip, and reinstall the valve in the toilet tank. You can see how to adjust it at this link

Jul 04, 2012 | Home

1 Answer

I have a problem with the water in the tank leaks past something, maybe the flush valve assembly and the tank has to refill about every 25 min. I got a new flush valve assembly and changed it and put...

Hi keithn60...

I had the same problem one time with my toilet tank, the answer is to put some silicone on the seal washer between the take and bowl assembly and to use a level on the tank to tighten it just enough to be level and not leak.
Please take time to rate me

Jun 27, 2011 | American Standard 4021 White Cadet 3...

1 Answer

I have Kohler 3386-6 Rialto Skylight Round Front Toilet problem is that tank filling is very-very slow, perviously it used to fill in few seconds now it is taking 15 min. please let me know how can...

There is a screen @ the inlet to the vavle where the water connects that may be plugged or contact Kohler they will send you a repair kit for the fill valve.

Dec 12, 2010 | Kohler 3386-6 Rialto Skylight Round Front...

1 Answer

Need to replace the flushing system in this model. very old. has like a strofoam float where would i find a replacement for it. the toilet is constantly running and takes forever to fill the tank up for...

You can get a kit that includes the entire flush mechanism at any home improvement or hardware store. This will include the fill valve, the float, and the flush valve. These are all pretty inter-changeable for old toilets, but to cover any doubts take pictures with a digital camera. Take a couple of pictures of the inside of the toilet tank. Also take pictures of the outside of the tank. Be sure to capture the supply pipe that feeds into the bottom of the tank. Take the camera with you to the store and ask for help.

Apr 30, 2010 | Home

1 Answer

Running water in Geberit Starck Toilet

I hate to say it but you may need a pro on this one, if you want I can try to walk you threw it but let me know.

Jan 11, 2009 | Duravit Starck 3 Wall Mounted Toilet with...

1 Answer

Toilet fills up very very slow


Oct 25, 2008 | Home

Not finding what you are looking for?
Crane Plumbing Toilet To Go  Tall Elongated Toilet  Logo

Related Topics:

501 people viewed this question

Ask a Question

Usually answered in minutes!

Top Crane Plumbing Home Experts

Donni Steen

Level 3 Expert

659 Answers

john h

Level 3 Expert

12650 Answers

Tom Chichester

Level 3 Expert

36467 Answers

Are you a Crane Plumbing Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides