Question about NorStar Meridian M7310 Phone

1 Answer

Change extension to another line pool

I wish to change one extension from the current line pool to another. Can someone advise?? I am operating the Norstar Meridian M7310 and have administrative logins.

Posted by on

  • Lucia Hayes Oct 01, 2009

    Hi, thanks for this response! However my screen does not read TERMINALS&SETS. On login it gives me options A. Config, B.Gen Admin, C. Extn Copy, D. Maintenance and E. oftware. In the menus of each of these I cannot locate TERMINAL& SETS either.

    Can you advise???

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • NorStar Master
  • 860 Answers

ProgrammingChange extension to another line pool - 2.gif is done on 7310, 7324 and 7316 type sets.Enter programming2.gif by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming2.gif.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you want to change the pool on.
Press the show key (top right arrow)
The display should say Line Access
Press the show key (top right arrow)
The display should say Line Assignment
Press the next key (bottom right arrow) .
The display should say Line Pool Access.
Press the show key (top right arrow)
Press the next key till you get to the desired pool(bottom right arrow) .
Press the Chng soft key from N to Y
Press the heading key till the display says Line Pool Access(top left arrow).
Press the next key (bottom right arrow) .
The display should say Prime Line
Press the show key (top right arrow)
Press the Chng soft key till you get to the desired pool
Press the release key when finished

Posted on Oct 01, 2009

  • george  peters
    george peters Oct 01, 2009

    Ok,yours is the older template for programming,sorry.
    Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
    the display says A. Configuration
    4 top line/feature keys are now used for programming
    Press the show key (top right arrow)
    the display will say 1.Trk/Line data
    Press the next key (bottom right arrow) .
    the display will say 2. Line Access

    Enter in the extension # you wish program
    Press the show key (top right arrow)
    the display will say Line Assignment
    Press the next key3 times(bottom right arrow) .

    The display should say Line pool Access.

    Press the show key (top right arrow)till you display the line pool you want to program access to
    Press the chng key. change from N to Y.
    Press the release key when finished

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reprogram the phone to ring when a new call comes in, default to a certain line, and show caller id when a call comes in.


The answer to the Caller ID question:
Depend on the type of system that the phone is connected to. Late model Partner ACS equipment will display Caller ID info between the first and second rings, provided that the telephone line is plugged into a module that supports Caller ID.

The answers for the other 2 questions are taken directly out of the Partner ACS Programming Guide which is available for free download at Avaya's website.

Ther answer to the incoming call line ringing question:
Again, depends on the system. For the Partner ACS:

1) Press FEATURE 00 at extension 10 or 11.
2) Enter the number of the extension to be programmed for Line Ringing.

The green lights next to the line or pool buttons show the current Line Ringing settings for all

lines or pools assigned to the extension. (If a line or pool is not assigned to a button, the green

light next to that button is off.) The following ringing options can be shown by the green light

next to the line or pool button:

? Immediate Ring - on steady

? Delayed Ring - flashes slowly
? No Ring - flutters quickly

3) Press the line or pool button until the button light shows the correct setting (the setting for the
currently selected line or pool also appears on the display).
4) Continue programming, or exit programming mode.

Line selection:

For incoming calls, the line selection (hunt sequence) is set by the local service provider). For outgoing calls....again....it depends on the system. For the Partner ACS:

1) Press FEAURE 00, SYSTEM PROG, SYSTEM PROG, CENTRAL PROG at extension 10 or 11.
2) Enter the number of the extension to be programmed for Automatic Line Selection.
3) Press **.
4) Press the line, pool, or INTERCOM buttons in the desired order. The valid entries for Automatic
Line Selection
depend upon the type of extension:

? Key Extension: Outside system lines, Left Intercom (the factory setting)

? Pooled Extension: Pool 880 button 1, button 2, Left Intercom, Right Intercom (the factory

setting), Pools 881-883, individual lines


For each button pressed, a display similar to the following appears:

Automatic Line Selection


5) To exit Automatic Line Selection, press **.
6) Press CENTRAL PROG and enter a new extension number, or exit programming mode.

Changing line ringing and line selection are tasks that are normally reserved for the Administrator of the telephone system.

Jan 06, 2011 | Lucent 18D Corded Phone

1 Answer

How do I program prostar 816 to ring?


To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down enter #20 the screen should say MMC DISABLED
enter in 1 2 3 4 1 # (that enables programming)
enter in #62 the screen should say day ring assn
press the line you wish to program
press the buttons for the extensions that you wish to ring (the ones in the right next to the handset)
press # when finished with the line
repeat steps 2 through 5 for the remainder of the lines you wish to change
press # when finished.

Mar 09, 2010 | Samsung Prostar 816 Phone

1 Answer

How to change silent mode to normal mode, the phone line it's fine, I just can't hear the incoming calls


To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming)
2) enter in #62 the screen should say day ring assn
3) press the line you wish to program
4) press the buttons for the extensions that you wish to ring (the ones in the right next to the handset2_bing.gif)
5) press # when finished with the line
6) repeat steps 2 through 5 for the remainder of the lines you wish to change
press #when finished.

Dec 15, 2009 | Samsung Prostar 816 Phone

2 Answers

How do I set phone to ring at my extention?


Partner, all releases.
Examples
Receptionist Call Routing. If you want calls to be answered by the receptionist first, set the lines at the receptionist’s extension to Immediate Ring and the lines at the users’ extensions to No Ring. (This is the factory setting)
Receptionist Backup. If you want all calls on a line to ring directly at users’ extensions -with the receptionist providing backup -set the line at the users’ extensions to Immediate Ring. Then set the line (or lines) at the receptionist’s extension to Delayed Ring. An incoming call that is not answered by a user within 20 seconds will also ring at the receptionist’s extension.
Programming
To change the way outside lines or pools ring at an extension:
  1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
  2. Enter the number of the extension to be programmed for Line Ringing. The green lights next to the line or pool buttons on the phone show the current Line Ringing settings for all lines assigned to the extension. (If a line is not assigned to a button, the green light next to the button is off.) The following ringing options can be shown by the green light next to the line button.
    • Immediate Ring - on steady
    • Delayed Ring - flashes slowly
    • No Ring - flutters quickly
  3. To change Line Ringing for any line, press the line or pool button until the button light shows the correct setting (the setting for the currently selected line or pool also appears on the display).
  4. Continue programming or exit programming mode.

Dec 01, 2009 | AT&T Lucent MLS-12D Phone

1 Answer

How do we remove an extension from a hunt group in a Norstar Meridian M7310 telephone?


Programming2.gif is done on 7310, 7324 and 7316 type sets.Enter programming2.gif by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming2.gif.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you want to change the pool2.gif on.
Press the next key 6 times (bottom right arrow) .
The display should say System Prgrming.
Press the show key (top right arrow)
The display should say Hunt groups
Press the show key (top right arrow)
The display should say Show Group:
Enter in the group number of the member that you wish to delete.
Press the show key (top right arrow)
The display should say Member DNs:
Press the show key (top right arrow)
The display should show members for that group.
Scroll to the member you wish to delete.
Press the Remove soft key.
Press the heading key(top Left arrow) till the display says Show Group: again.
Enter in the group number you wish to to change the deleted member to
Press the show key (top right arrow)
The display should list the current members of that list
press the Add soft key.
enter in the DN of the member you wish to add
Select Appr & Ring setting for the hunt group member
Press the release key when finished

Sep 30, 2009 | NorStar Meridian M7310 Phone

2 Answers

Want to turn the ringer off unless receiving a transfer.


This feature determines how each outside line or pool assigned to an extension rings. You can specify Immediate Ring, Delayed Ring (telephone rings after a 20-second delay), or No Ring. Delayed Ring is useful for backup coverage on shared lines or pools, such as for secretaries who cover each other’s lines. No Ring is useful for all extensions except 10 when an operator answers all calls, or for telephones with no regular users, such as those in conference rooms. To change the way outside lines or pools ring at an extension:
To change the way outside lines or pools ring at an extension: 1 Press "Feature" , "00", "System Program ", "Central Tel Program" at extension 10 or 11.
2 Enter the number of the extension to be programmed for Line Ringing. The green lights next to the line or pool buttons show the current Line Ringing settings for all lines or pools assigned to the extension. (If a line or pool is not assigned to a button, the green light next to that button is off.) The following ringing options can be shown by the green light next to the line or pool button: • Immediate Ring — on steady • Delayed Ring — flashes slowly • No Ring — flutters quickly • Immediate Ring is the factory setting for lines; No Ring is the factory setting for pools.
3 Press the line or pool button until the button light shows the correct setting (the setting for the currently selected line or pool also appears on the display).
4 Continue programming, or exit programming mode.

Aug 06, 2009 | AT&T Lucent MLS-12D Phone

1 Answer

I would like to know how I can change the pump mode to work automatically for 8 hrs at night


Just delete your current program and "add" a need one. In this field, it allows you to set the hours of operation you wish.

Jun 23, 2009 | Jandy Aqualink Rs4 One Touch Control...

1 Answer

How to change Auto attendent Dial O to ring at multiple ext


First you will need to add extensions to a group X in #502
When you login to administrative mailbox you will change you operator extension to 7X. Phones in the group will ring

Apr 22, 2009 | Avaya Lucent Partner 616 Phone

1 Answer

Stop ringing at certian phones when outside calls come in.


http://dstech1.com/programming-line-ringing/


Partner, all releases.
Examples
Receptionist Call Routing. If you want calls to be answered by the receptionist first, set the lines at the receptionist's extension to Immediate Ring and the lines at the users' extensions to No Ring. (This is the factory setting)
Receptionist Backup. If you want all calls on a line to ring directly at users' extensions -with the receptionist providing backup -set the line at the users' extensions to Immediate Ring. Then set the line (or lines) at the receptionist's extension to Delayed Ring. An incoming call that is not answered by a user within 20 seconds will also ring at the receptionist's extension.
Programming
To change the way outside lines or pools ring at an extension:
  1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
  2. Enter the number of the extension to be programmed for Line Ringing. The green lights next to the line or pool buttons on the phone show the current Line Ringing settings for all lines assigned to the extension. (If a line is not assigned to a button, the green light next to the button is off.) The following ringing options can be shown by the green light next to the line button.
    • Immediate Ring - on steady
    • Delayed Ring - flashes slowly
    • No Ring - flutters quickly
  3. To change Line Ringing for any line, press the line or pool button until the button light shows the correct setting (the setting for the currently selected line or pool also appears on the display).
  4. Continue programming or exit programming mode.

Jan 09, 2009 | Lucent PARTNER18 Corded Phone

Not finding what you are looking for?
NorStar Meridian M7310 Phone Logo

Related Topics:

799 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

dan4261

Level 1 Expert

14 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...