Question about PC Concepts Computers & Internet
I got a new computer from my daughters and I wanted to use the above keyboard, It is not USB but I do have a adapter for it to make it so, however I cannot get it to load on the new computer, as it will not reconize it as such. I was hopeing that it would be Plug and play, but I guess it is not.
The new computer is a Dell Insiron with all the trimmings, Now I guess the only way to use it is with some software which I do don have. Can you help... It is a Keyboard SK-6000 series.
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Sk-6000 keyboard
For the touchpad: if your keyboard equipped with standard COM connector try: http://www.acersupport.com/library/ti_note/2x0tpad.exe (older synaptics driver - working with COM port based touchpad perfectly) - or if you have converted it to PS2 connector (i converted my one from COM to PS2) you can use the latest generic touchpad driver from http://www.synaptics.com/support/drive.cfm . (sadly synaptics dropped support for comport based devices in the latest drivers...)
Posted on Mar 23, 2008
You can download the driver here. However, it is not compatible with some newer CAC Cards especially with Vista. If you install the driver and it won't read, you need a new reader. Sorry.
Posted on Jan 02, 2009
SOURCE: Dell keyboard SK-8115
(That is the the Num Lock indicator, nothing to worry about.) If it is not working it is likely because USB keyboards can time some time to be recognized by windows, let the computer boot up with the keyboard connected and let sit for up to ten minutes.
Sometimes if other hardware is detected at the same time which requires drivers to be installed, windows will never proceed to installing your keyboard, however you cannot install the other drivers until you have a working keyboard. To solve this, you will need to use an older style PS/2 keyboard to get everything installed and working as they do not need to be detected.
Posted on Jan 08, 2009
Make sure that all USB functionality is enabled in the BIOS, especially USB Legacy Mode. If Windows still does not recognize the keyboard, then it is not compatible with USB. USB keyboards can be found as low as $10 pretty easily if all you need is basic keyboard functions.
Posted on Feb 11, 2010
Sorry for responding to your query late and hopefully you found a solution but nonetheless I am writing it here for others who are facing the same issue.
For every smart card reader keyboard, always visit the manufacturers site, in this case, DELL and resolve the issue from there.
Here is a direct link from where the driver can be downloaded for free:
After running the file, it shall leave driver files in your hard disk. Go to 'DEVICE MANAGER', select the keyboard and click 'UPDATE DRIVER'. Choose the folder where the files are stored and your issue will be resolved.
Posted on Feb 15, 2010
Tips for a great answer:
Jan 04, 2014 | Maxi Switch Silitek SK 6000 Keyboard
Sep 12, 2013 | Casio Keyboard Power Adapter
If it's doing nothing then you have a bad USB port (move it to another USB port) or the USB keyboard is disabled in CMOS (usually hit F2 or Delete button during start up to get to). If the keyboard is working but isn't working correctly, there is something wrong with the keyboard. You probably just need a new keyboard.
Jan 30, 2011 | Dell SK-8125 Keyboard
Feb 11, 2010 | Maxi Switch Silitek SK 6000 Keyboard
Aug 28, 2009 | Maxi Switch Silitek SK 6000 Keyboard
May 13, 2009 | PC Concepts Classic USB+2 (63142) Keyboard
Nov 22, 2008 | Dell Smartcard USB Keyboard SK-3106
Dec 23, 2007 | Maxi Switch Silitek SK 6000 Keyboard
93 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: