Question about Canon MultiPASS F60 All-In-One InkJet Printer
First, you should check the manual to see if it says anything about this condition. If not, or you lack a manual, open the cover. The print heads will probably move to the middle so you can access the cartridges. Watch what direction it came from. If you look over on that side you'll see the parking area. The waste ink reservoir is below the parking area or may be on a moving parking mechanism. You may be able to pull it out or just get it with some paper towels. There might be a special door or procedure for emptying the waste ink receptacle.
Posted on Oct 01, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Waste Ink Near Full
Waste Ink Tank Reset
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.
Let me know the result.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Posted on Mar 08, 2009
SOURCE: alarm is blinking with message
All the best
This works on the F30, F60, and F80.
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select  PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
Skip step (6) since there is no [OK] key on F30 printers.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
Posted on Feb 13, 2010
Tips for a great answer:
Jan 05, 2010 | Canon SmartBase MP390 All-In-One InkJet...
Dec 17, 2009 | Canon PIXMA MP780 All-In-One InkJet...
Dec 14, 2009 | Canon PIXMA iP2000 InkJet Printer
Dec 10, 2009 | Canon PIXMA iP1500 InkJet Photo Printer
Dec 02, 2009 | Canon PIXMA iP2200 InkJet Photo Printer
Dec 01, 2009 | Canon Office Equipment & Supplies
Oct 01, 2009 | Canon MultiPASS F60 All-In-One InkJet...
Jun 23, 2009 | Canon MultiPASS MP730 All-In-One InkJet...
Mar 08, 2009 | Office Equipment & Supplies
Nov 11, 2011 | Canon MultiPASS F60 All-In-One InkJet...
184 people viewed this question
Usually answered in minutes!