?siht xif ot od I nac gnihtyna fi tahw...gnikcilc peek tsuj ot smees esuom ym dna ,sdrowkcab sepytdraobyrk ym tsriF

Your phone is probably locked to a certain network (i.e. Vodafone) and can be unlocked (after a certain time) by requesting a NAC (Network Access Code) from your old service provider. If you use a phone that is locked to a certain network provider and your phone is NOT SIM free (meaning you can use any SIM in the phone from any network) then you will need a NAC to unlock it from you old service provider.

https://nac.vodafone.ie/

The above link is provided as an example.

See this... http://mobileoffice.about.com/od/wifimobileconnectivity/ht/how-to-set-up-a-wi-fi-connection.htm

You need to connect it to a router before connecting it to PC

Trazio sam gdje pise 32 bitna ili 64 bitna,ali niasm mogao nac.
Na kojem bi mijestu mogao nac?

Csi Dna Laboratory Instructions - Website of letosaga!

letosaga.jimdo.com/2012/10/11/csi-dna-laboratory-instructions/

Oct 11, 2012 - The kit offers instructions for conducting 10 experiments and provides.... Comments about Bowen Hill Edu Science CSI DNA Laboratory Kit: ...

Instruction manual for csi dna lab kit - Fixya

www.fixya.com/support/t11150204-instruction_manual_csi_dna_lab_kit

Jan 5, 2012 - instruction manual for csi dna lab kit - Planet Toys Csi Dna Lab question.

[PDF]Crime Scene Investigator PCR Basics™ Kit - Bio-Rad

www.bio-rad.com/webroot/web/.../10002461.pdf

Bio?Rad Laboratoriesreal-world forensic science labs. Bio-Rad is ... TH01) actually used in forensic DNAprofiling; the DNA sequence at this locus contains four ..... Much of this background information is provided in the instruction manual and the appendices.

The OD and OP error codes are trouble shot the same way. See if this link will help.


display shows OP but unable to clear

FAV6800A/FAV9800A Service Manual for reference. Sears Parts Direct for reference

If you need additional help let me know.........Rich

man its a power ic fault need to replace by expert

First connect your router to computer with ethernet cable if it is not in network.
Then access your router with following link.
http://192.168.1.1
or http://192.168.0.1

type user name as "admin" and password as "admin' or blank or "password"
then go to wi fi security then cinfigure it as WEP then enter encryption code it is your connection password .
So who want to connect your wi fi need that password .So your wi fi is secure now.

Go to START and find RUN, then type in CMD and hit ENTER, should throw up a black box (Dos window) you will type IPCONFIG and it should give you an adapter gateway ip address like 192.168.0.1 or something like that, from there close out that box and launch internet explorer or firefox or netscape or whatever browser you use. Type in the ip address where you would normally type www.google.com. Hit ENTER, this will interface you with the router. It might be password protected. Usually the username and password are both the word admin. If not look at the bottom of router for password. Look for wireless tab once in router and select network type as wep. Look for the key that the router automatically generates. This will be your wep key. Now your wireless connection will be secure. Hope this helps...Tennis123

What type of policy u want to configure?