Question about Homelite Mighty Lite Lawn Trimmer

1 Answer

The Pull cord was jamming. I took it apart and

The Pull cord was jamming. I took it apart and found it was wrapped around the motor and caught in the screws that holds the coil in place. Now I'm not sure if the cord is suppose to go around the motor or not and it won't retract back into the coil. Are there any instructions in regards to the how the cord should be in the mechanism or how to fix this type of issue. It's a Homelife Might Lite 26ss

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers

The rope and spring both have thier respective place in the housing for thier mountings they can be rewound by hand and reassembled with success,hint oppisite end of spring has a anchor point on the housing while one end is secured by a cup like screw mounting,to create the retracting force for retrival of the pull start rope its tricky if haven't done it before but you learn by trying Good luck Steve

Posted on Oct 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can't pull cord to start lawn mower


Either the motor is frozen or the start assembly is jammed.

Aug 12, 2017 | Garden

1 Answer

Uh70100 got caught in long haired rug, now motor hums but won't turn....impeller or fan seems jammed or broke


Pieces of the carpet jammed the brush, if you can't pull them out from the front you will need to take the head apart to clear the brush.

Feb 27, 2015 | Vacuums

1 Answer

Lawnmower starting problems


you wrapped the rope backwards

Aug 16, 2014 | Garden

2 Answers

My sewing machine gears jammed.


One or more of the bushings is seized, the machine needs to disassembled, the bushings removed, cleaned, re-lubricated. Not something you can do yourself.


Apr 07, 2010 | Baby Lock Espire

1 Answer

A cord got caught in the back of the drier and is now not seen. Drum does not turn.


It has wrapped around the motor pulley causing the machine to lock up. You will have to get into the motor to remove the cord. This may have also broken the belt.

Mar 09, 2010 | Dryers

1 Answer

Jammed pull cord on Poulan P4018 chainsaw!


There maybe a split pin holding the cover down over the spindle! Not too sure, but possible. Could be pushed down the centre, just a case of having a good look. Only really worked with Hurqvarna's and Makita's. Hope it helps. Good Luck
RICH

Dec 16, 2009 | Poulan Wild Thing 18" 40cc Gas Chainsaw -...

1 Answer

I think there is something caught in the rotar - Ariens snowblower - it was running smooth then it jammed up. I pulled out a few soft branches wrapped around drive shft but I cant see anymore but it stills...


You need to check and see if it broke a sheer pin when it jammed,they look like reguler bolts and can be found in the tubeing that you see when looking at roto in the front.

Dec 09, 2009 | Garden

1 Answer

Roomba brushes won't spin


I had this problem with my Roomba Discovery. I ran across your question while searching for an answer. My main symptoms were, Roomba hesitated a lot, and the dust bin did not fill. I had plenty of hair wrapped around the brushes and against the filter.
I just finished taking my Roomba apart. I found the motor drive shaft had a LOT of hair wrapped around it and it had climkbed into my gearbox. I took that apart and cleaned all the hair out of the gearbox. My Roomba is back to normal now, filling the dust bin.

Jun 28, 2008 | iRobot Roomba Red 4100 Bagless Robotic...

1 Answer

Thread getting caught underneath


you need to replace your shukle that holds the tread bobbing below.it is either slack or broken . if it is slack then you tighten the little screw that holds a cover that gives the thread tension .if its broken then replace it.once the thread is slack below it will cause your thread to bundle up.

Mar 10, 2007 | Euro-Pro Shark 80 - 7133

Not finding what you are looking for?
Homelite Mighty Lite Lawn Trimmer  Logo

395 people viewed this question

Ask a Question

Usually answered in minutes!

Top Homelite Garden Experts

roeb

Level 3 Expert

571 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Mike Squire

Level 2 Expert

420 Answers

Are you a Homelite Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...