Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I am getting a control locked prompt. I have tried pushing the reset for 30 seconds but it still gives me the same prompt. Is there another solution?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,911 Answers

The reset or cancel button does not control the locking feature. The following link explains how to correct a control panel lock issue on a Whirlpool Duet:

http://www.fixya.com/support/r2469429-kenmore_elite_amp_whirlpool_duet

The control panel lock is actually a designed safety feature that allows you to lock the control panel to keep small children from manipulating the controls. It can be inadvertently set by leaning against the control panel buttons, or following a power outage.

If you have questions, please let me know. I hope this helps you.

Posted on Oct 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an Audiosonic Full-HD Media Player MP605H and it gives me a prompt message saying 'the device is not authorised ".I still can play movies etc but have to OK the prompt every 30 seconds. What is


Had the same problem.
As the remote was DOA I swapped the whole package.
No problem with the new one.
So I suggest you return it for replacement.

Sep 20, 2014 | Audio Players & Recorders

2 Answers

Can't open diswasher door. (Triton XL) Tried holding Heated dry button for three seconds and still won't open


unplug from power outlet for 30 mins and plug back, this may reset the safety lock

Apr 18, 2008 | Dishwashers

1 Answer

Oven door locked


Many Kenmore ovens have a control lock that keeps the oven door locked even when the self-clean cycle has not been in use. This feature is meant to prevent children from opening the door or using the controls on the oven. To cancel the oven lockout, push and hold "Stop" for three seconds. Wait 15 seconds for the oven door to unlock automatically.

Reset
After verifying that the oven lockout feature has been released and waiting at least an hour after a self-clean cycle, if the oven door remains locked, try to reset the oven. Disconnect power to the range, and wait 30 seconds. Restore power and try again. If the door remains locked, disconnect the power and try to reset the circuit breaker or fuse. Contact Kenmore if the door remains locked after both attempts at a power reset at 800-827-6655.

Feb 26, 2014 | Kitchen Ranges

1 Answer

I need to access my NetgearN150 from a command prompt as the GUI is not working can someone tell me if there are telnet or ssh commands available for this unit? The following lists the systems I am...


I think if you're using stock firmware you might be out of luck using ssh.
Still try telnet. (telnet IP address) if it was enabled before on the router (disabled by default.) If you have Win 7 you have to enable telnet in "Programs and Features/Turn Windows features on or off".
Find more info here.
Anyways - I would first try a 30-30-30 reset.
  1. Hold reset button for 30 sec.
  2. pull power whilst holding the reset button for another 30 sec.
  3. plug in power and keep the reset button holding for an additional 30 sec.
Let me know how that goes.

Aug 13, 2013 | NetGear Computers & Internet

1 Answer

Control lock stuck


Good Morning Stephanie - To de-select the Control Lock, try pressing and holding the "Heat Dry" key or press down on the LOCK KEY icon for approximately 20-30 seconds. If the issue persists, try resetting the dishwasher by either unplugging it or flipping the household circuit breaker off. It is important to wait approximately ten minutes and then turn the unit back on. The dishwasher should resume to normal operations. Hope this information helps resolve this issue, however if I can be of further assistance, please feel free to reconnect.

Jun 16, 2013 | Frigidaire Dishwashers

1 Answer

I can't turn my Kenmore upright freezer on.


Try disconnecting power for about 30 seconds, and then restore power. This will reboot the control and maybe restart.

Jul 09, 2017 | Kenmore Freezers

1 Answer

When I try to send a fax I get a redo message and no pages are sent...i have sent many faxes to this number....a message appeared after one page was scanned that said to prress clear and srop...i could not...


Please reset the Printer by following these steps:

Switch the Canon MX310 off using the "Power" button, then push the "Stop/Reset" button on the control panel. Hold the button down for about five seconds.

Push the "Power" button while holding "Stop/Reset." Hold down both buttons for five seconds.

Release "Stop/Reset" while holding down the "Power" button.

Push "Stop/Reset" twice while continuing to hold the "Power" button. Release the "Power" button. The power light will turn green.

Once the light is steady green, push "Stop/Reset." Wait about three seconds and push it again. Wait three more seconds and push it one final time, for a total of three times. The power light will turn orange.

Push the "Power" button, then lift the MX310 cover open.

Remove both ink cartridges and wait 10 seconds. Replace the cartridges and close the MX310 cover. Wait 30 seconds.

Push the "Power" button. Wait a few seconds to allow the printer to fully power down, then switch the Canon MX310 back on using the "Power" button.

Feb 27, 2011 | Canon MX310 Office All-In-One Printer

2 Answers

How do i reset the Netgear EN106tp to factory setting?


Hubs don't have any settings to reset. If it's a router, try the "30-30-30 reset." Get a pen, and hold down the reset button 30 seconds while the router is still plugged in. While still holding down the reset button, unplug the power, hold down another 30 seconds, then plug it back in, and hold down the reset another 30 seconds. The reset button is a small black button that you'll need a pen to push.

Sep 30, 2009 | NetGear EN106TP Networking Hub

2 Answers

C180 Auto car doors not responding to remote commands from key


hello,good day,first try to use your spare key,or check your fuse box at the rear,near your battery,if not corrected,send your car to a dealer for proper diagnose by using hht or star,ty

Jul 21, 2009 | 1988 Mercedes-Benz S-Class

3 Answers

Control lock light on-door opens-won't start


Press 'control' + 'pause:lock' +
'temperature' for 5 seconds
OR
'end of cycle' for 5 seconds. Tell me which worked & rate me pl.

Apr 16, 2008 | Whirlpool GHW9150 Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

567 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2295 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...