Question about Yamaha Rx-v365 A/V Home Theater Receiver

1 Answer

Yamaha Rx-v365 trying to program remote for

Yamaha Rx-v365 trying to program remote for samsung led have read the instructions..just not exactly sure of button pushing sequence...i hold down and keep holing down dtv button and hold for three seconds tv power..do ineed to keep holding down tv power button when putting in 4 digit code ...please help ta Gary

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Yamaha Master
  • 1,114 Answers

Press and hold "DTV" then, while holding doen DTV, press power and hold for three seconds. Release both buttons and enter your code. The front panel of the receiver will say "remote setup ok" or "NG" (no good) That being said; while you are in the process of finger acrobatics! make sure your remote is pointing in the general direction of the receiver. Yes, it's a pain, however, once your done, the Yamaha remote is a champ! Hope this helps.

Posted on Oct 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have lost the instruction manual for my Yamaha Rx-v365 5.1 ch av receiver, where can i get a copy?


http://www.yamaha.com/yec/registration/yecloginredirect.aspx?returnurl=http%3a%2f%2fwww.yamaha.com%2fyamahavgn%2fDocuments%2fYEC%2fAV_Receivers%2fManual%2fRX-V365_manual.pdf

It;s a long link, but here's your manual! Hope this helps.

Jun 04, 2010 | Yamaha Rx-v365 A/V Home Theater Receiver

1 Answer

How to connect the PS3 to RX-V365 to get best sound qualitity in films. I have sony BRAVIO LCD wiht PS3 and I recently bought RX-V365 Yamaha home theater system. Please advice on connecting all three to...


You can connect PS3 video via HDMI to receiver and from receiver via HDMI to TV. But RX-V365 doesn't support HDMI audio, so you have to connect audio separately via SPDIF digital cable. I think PS3 uses optical SPDIF, so you will need optical cable. If you can't find cheaps optical cables in your shop, you can try byuing from ebay ($1-5 max.)

Feb 13, 2010 | Yamaha Rx-v365 A/V Home Theater Receiver

1 Answer

Ipod video onto TV through RX v365


No it is not. TV out requires special cables that can be purchased for the iPod.

Jan 12, 2010 | Yamaha Rx-v365 A/V Home Theater Receiver

1 Answer

Yamaha rx-v365 plugged in the hdmi from cable box


You have to configure your DTV input to use optical audio instead of analog dtv audio (red/white plugs). Input assignment should be described in the manual. Come back to me if you have still problems with it.

Dec 26, 2009 | Yamaha Rx-v365 A/V Home Theater Receiver

1 Answer

I have HDMI cable from TV to RX-V365. HDMI from DVD player to RX-V365. HDMI from DirectTV receiver to RX-V365. Speakers attached. I can watch the TV and the DVD player... but the sound is still coming...


the RX-V365 cannot process the audio from the HDMI input. You will also need to connect a seperate audio input (either coaxial or optical) into the relevant input in the rear of the RX-V365

Dec 12, 2009 | Yamaha Rx-v365 A/V Home Theater Receiver

1 Answer

My Yamaha RX V365 will not turn on anymore. It


Most likely, one of the channels is blown, or you having power supply issue. It is hard to determine exact cause of the problem with out looking at the unit.

Nov 28, 2009 | Yamaha Rx-v365 A/V Home Theater Receiver

1 Answer

How do i program for sony cd player


I also have a Sony CD player (CDP-XE330) and I have tried almost every code from the yamaha manual, but without success.
The only codes that yamaha remote supports, are the codes from the list in the yamaha manual. If none works, you are out of luck and the only solution is using the original sony remote (if you have one) or universal remote.

I have recently purchased Logitech Harmony 525 on eBay and now I control all my 7 devices with it without any issues. It is programmed via USB and Logitech has codes for almost 250.000 devices.

Sep 16, 2009 | Yamaha RX-V361 Home Theater Receiver

Not finding what you are looking for?
Yamaha Rx-v365 A/V Home Theater Receiver Logo

487 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5011 Answers

The Knight
The Knight

Level 3 Expert

73619 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Yamaha Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...