The apparatus/prongs that operate the paddle don't move properly
The apparatus/prongs that operate the paddle make a humming noise, but they are sluggish, and inconsistent - the noise is different from the usual noise when the cycle begins (3 hour cycle). My husband 'fiddled' with it and got it to work better, but then it would slip back into the humming/sluggish mode. Any suggestions?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If refilled toner cart used without proper cleaning, the rollers may sticked and jam so motor try to move but could not, make it free or remove the toner cart and hear the moving sound. or you may try with another cart. Else motor or main PBA fails.
Hi, you may have a bad Earth power 110 V AC cable connection which makes such hum / buzz even nothing connected..
Check the connections between
components and make sure they are secure before proceeding to the next
Step. Sometimes, loose connections can cause a hum.
Separate the audio cables from
the power cables; electromagnetic interference from the power cables can
cause stereo hum. Use cable ties to secure the audio cables away from
the power cables.
Plug in a surge protector to the outlet, and then plug all the components into that surge protector
Connect a ground plug to the
surge protector and then plug the ground plug into the main outlet. A
ground plug is available at any hardware store, and turns a three prong
connection into a two prong. Ground plugs help eliminate 60 cycle hum.
Connect the ground wire from
your turntable to the ground wire connection on the receiver. If this
doesn't work, looking on the back there should be a grounding point,
receiver.. Split a wire and attach one of the splits to the receiver
where you will see the text, "ground" or something similar. Attach the
other end to something metal such as a pipe that goes into the ground.
Secure with electrical tape. Plug in.
connect the ground wire to a screw on the electrical
There is a sealed bearing in the bottom of the bread pan. The paddle sits on the sealed bearing shaft. Over time the bearing begins to fail and the paddle does not turn freely or it may even freeze up. If you are sure everything is installed correctly this may be the problem. See if the paddle moves freely by hand and is not really loose. Sealed bearings can not be replaced. Eventually you will need a new bread pan. Sorry Hank
Hi, Kindly notice that are you able to hear any humming noise from the machine if you hear the humming noise means check whether the drum of the machine is moving freely with hands rotation do this after switching off the unit
After doing this if you find that the drum is moving hardly means kindly replace the mechanism
If it is a three prong plug you may have a ground loop issue. Make sure all connections are fully connected first. Break off the round, ground prong see if that helps. It will also cause lines or color differences in tvs with a 3 prong plugs. If that is'nt it. It will not affect any operation or safty of the product.