Question about Hitachi 53FDX01B 53" Rear Projection Television

3 Answers

Hitachi 43FDX11B television Ghosting

I had the television repaired about 2 and a half years ago for the same problem. I am in a rural area and short on television repair personal around here.It is an Hitachi 43FDX11B
V1K006629 produced in it looks like in Nov 2001 from Mexico.

Last repair man told me it was a circuit board that goes bad and had to replace the whole thing. Picture show red, blue, green double images.

Could I get the circuit board and replace myself. I am pretty mechanically minded and have done electric house work and automotive.

Lanny
heylanny@hughes.net
Rolla MO 65401

Posted by on

  • 5 more comments 
  • HeyLanny Dec 20, 2007

    Probably just replace the board as I want to purchase a new flat screen later in 2008.

    Would it include price and instructions for installation?

  • Accelero Dec 29, 2007

    Hi - I have one of these that just the blue is outta whack. Same thing?

  • nobnob Jan 02, 2008

    43fdx11b same problem,
    what ics should be replaced and any other parts.

  • Rob368 Jan 07, 2008

    I have the same problem, i have ghosting and distortion till it seems to warm up and then it is fine, but i have to wait for 15-30 min. need to get fixed, hate to buy a new tv.

    Rob

  • sdmckinney Jun 14, 2008

    I have a 53 inch version (53fdx01b) and am getting ghosting of blue and yellow behind white images. Fix?

  • madman666333 Sep 03, 2008

    my tv has the same problem i replaced the ic`s and a bad resistor the rk50 but the resistor keeps burning up. not sure where to go next. i replaced it two times.

  • Anonymous Feb 15, 2009


    Last repair man told me it was a circuit board that goes bad and had to
    replace the whole thing. Picture show red, blue, green double images.
    I had them repair the system and it cost me $250.00 Now the the unit is doing the same thing again and there said the circuit board is bad.
    Could
    I get the circuit board and replace myself. I am pretty mechanically
    minded and have done electric house work and automotive.

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

I had the same problem on my Hitachi rear projection TV 53FDX20B made in Mexico. The blue convergence problem. Blue focus had shifted and appeared like a blue ghost image. I followed the step by step intructions from the fixya site. First Replaced the two STK 392-110 ICs and turned on the tv. No change. Then I went looking for the bad resistor. There was one resistor RK50 (2.7 ohm, 1Watt capacity) which is attached not right close to the printed circuit board surface but was well raised up from the board. The bands on the resistor were a little discolored. I replaced that one and turned on the tv. The convergence problem was solved. Thanks for the step by step instrucitons on your site.

Posted on Aug 12, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,694 Answers

Convergence PC board can be replaced in some chassis or you can rebuild it with upgrade parts that last longer....which would you rather do ?......................T.

Posted on Dec 20, 2007

  • Vista Electronics Dec 20, 2007

    I will research and get back to you...........T.

  • Vista Electronics Dec 20, 2007

    Conv. board # JT22051 PTS Corp. rebuild $ 140.00 core first exchange = board must come out and be shipped to rebuilder or search the net...........................................T.

×

Ad

I had the same problem on my Hitachi rear projection TV 53FDX20B made in Mexico. The blue convergence problem. Blue focus had shifted and appeared like a blue ghost image. I followed the step by step intructions from the fixya site. First Replaced the two STK 392-110 ICs and turned on the tv. No change. Then I went looking for the bad resistor. There was one resistor RK50 (2.7 ohm, 1Watt capacity) which is attached not right close to the printed circuit board surface but was well raised up from the board. The bands on the resistor were a little discolored. I replaced that one and turned on the tv. The convergence problem was solved. Thanks for the step by step instrucitons on your site.

Posted on Aug 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Hitachi ultravision 50v500 ghosting


http://www.hitachi.us/Apps/hitachicom/content.jsp?page=support_contact/remote_ir_codes/index.html&level=2&section=support_contact&parent=remote_ir_codes&nav=left&path=jsp/hitachi/forhome/ubcg/&nId=iD

Mar 02, 2008 | Hitachi 50UX58B 50" Rear Projection...

1 Answer

Hitachi rear projection TV Model 43FDX11B with convergence problem


You will need to install a convergence repair kit. You can get the repair kits with instructions at www.tvrepairworld.com

Sep 21, 2010 | Hitachi Televison & Video

2 Answers

I want to know the wattage for Hitachi 43fdx11b


225 normal up to 265 watts for high brightness scenes.
When the set is off it draws 2.7 watts

Sep 25, 2009 | Hitachi 46F500 46" Rear Projection...

1 Answer

Hitachi Model # 43FDX11B. Will not power


Mine just developed the same problem.. did you find a solution/fix?

Jul 09, 2009 | Hitachi 43FWX20B 43" Rear Projection...

1 Answer

Stk392-120 hitachi 43fdx11b


Stk392-110,-120 and -150 are replaced with upgrade IC's....
Stk394-160E = use kit # X 480293 ( has two in kit = replace both)...................T.

Apr 21, 2008 | Hitachi FDX Series 43FDX10B 43" Rear...

1 Answer

Color ghosting


KIT10 $29.50
Repair Kit for Hitachi convergence Chassis DP-14G
KIT10 Includes 2 pcs STK392-150 , 1 each of the following 1W axial lead fusible resistors:


http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Nov 11, 2007 | Hitachi 50GX30B 50". Rear Projection...

1 Answer

50UX26B Convergence or Ghosting problem


new convergence pc board is worth $400-600 /repair the old because you probably won't find one and if you do the same thing will happen in time anyway,you know what you got and must ask your self .what will it cost to replace it at this time /shop around /compare prices and extended warranties////////////

Sep 08, 2007 | Hitachi 50UX57B 50" Rear Projection...

Not finding what you are looking for?
Hitachi 53FDX01B 53" Rear Projection Television Logo

842 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2336 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...