Question about Canon imageRUNNER 5020 Copier

1 Answer

Error code no. E00004-0000

Yesterday the power just cut off for 5 minutes the they turn on again, when I turn on the copier the error code no. is display, and tell us to turn the power off and turn on again, but it still display the same error code again. Please tell me how to fix that problem. Thanks for your help.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An user who is expert in 3 categories / brands.

  • Canon Master
  • 1,346 Answers
Re: Error code no. E00004-0000

The fuser has a bad
thermistor or
thermofuse or

Posted on Dec 20, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Error code c-3452

try only once
If the code comes back, you need a Fusing unit. Which will be expensive!!! Sorry :( DO NOT KEEP TRYING TO RESET THE MACHINE! THE MACHINE IS TELLING YOU THERE IS A PROBLEM!!!!! A Fire could occur and that would ruin a perfectly good day!!!!

1. Turn OFF the Main Power Switch.
2. Turn Main Power Switch ON while pressing the Utility/Counter key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and the it has been reset.
5. After turning off the Main Power Switch, turn it on again more than 10 seconds after
and check if the machine starts correctly.

Jan 07, 2014 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Ir6000 error code e246-0002

fuser assy either getting to hot or not hot enough. Fuser error codes cannot be reset by power cycling the machine even though that is what the display tells you to do. In order to reset the fuser error code you must enter the service mode & reset the code. To enter the service mode:
press"Additional Functions" button (looks like a picture of a head with a star inside)
press the #2 and #8 at the same time (simultaneously)
press "additional functions" again
The display should show a choice of
copier,feeder,sorter,fax,or board service modes
Select copier
select clear
select ERR
press OK
Turn power off & back on.
After clearing error stay at the machine to see if it comes to ready. The fuser assy can reach 139 degrees C.(Water boils @ 100C) The error can only be cleared through the service mode because a technician should inspect the fuser to verify there is nothing faulty that could possibly start a fire. If you enter the service mode & clear the error, power cycle the machine & during warm up the machine throws a code again- turn it off, unplug it & call a tech for fuser repair.

Jan 11, 2011 | Canon Printers & Copiers

1 Answer

Getting error code C11A4 can you help me fix this please?

Some basic reset procedures.

A. Open and close the front door.
B. Power off the machine, wait 30 seconds power on.
C. Power down the machine, unplug from the wall for 1 minute, plug in and power on.

D. 13.1 Trouble resetting
1. Turn OFF the Main Power Switch.

2. Turn Main Power Switch ON again while pressing the Utility/Counter key more than 10 seconds after.

3. Touch [Trouble Reset].

4. Check to make sure that [OK] is displayed and the it has been reset.

5. Turn off the Main Power Switch and turn it on again more than 10 seconds after, and make sure that the machine properly starts.

Nov 19, 2010 | Konica Minolta bizhub 250 All-In-One Laser...

1 Answer

Error code 501 solution

To clear error 5100 clean the surface of the copper contact of the ink cartridges with a moistened cloth and let it air dry. Fix the cartridges to the holder and return properly the cover of the printer.

These 2 reset procedures will help you clear the errors displaying in the control panel of the printer and let you print again.

To clear U053, U051 and U052
1. Turn off your printer
2. Press and hold the STOP/RESET button
3. Press and hold Power ON button
4. While holding the Power ON button, release the STOP/RESET button
5. While holding still the Power ON button, press twice the STOP/RESET button
6. Release the Power ON button
7. Wait until it display an "idle" message. It will take about a minute.
8. When "idle" appear, open the top cover to expose the cartridges.
9. Lift up the cover for cartridge holder and take out both the black and color cartridges
10. Return the cover of cartridge holder and turn off the printer
11. Return the top cover and turn on the printer again
12. After the printer initialize, return the cartridges.

To clear error U162 or U163
1. Turn off your printer an turn it on again
2. After the printer initialize try to copy or print. The error will appear.
3. When the error is displayed on the display panel of the printer, Press and Hold the STOP/RESET button and wait until it self restart.
4. Release the STOP/RESET button the the printer is restarting.
5. Wait for a few seconds and the pending print jobs will commence.

Aug 10, 2010 | Canon PIXMA MP180 All-In-One InkJet...

1 Answer

How to clear error code c 3421 on konica bizhub c253

C-3421 = Fusing heaters trouble
To Reset:
1. Turn OFF the main power switch.
2. Turn main power switch ON while pressing the Utility/Counter key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and the it has been reset.
5. After turning off the main power switch, turn it on again more than 10 seconds after and check if the machine starts correctly.

If error code returns a technician is needed to replace fuser section. Call local dealer with error code and tell them to make sure a tech brings a fuser assembly.

May 19, 2010 | Konica Minolta bizhub C250 All-In-One...

2 Answers

I have a 2045e copier that I moved from one area to another. Now it gets error code SC545. How do I clear the code.

Press 'Function Clear' button, then '1' then '0' then '7' then press and hold 'Stop/Clear' button. The display will change to 'SP' mode. Now shut off the main power switch on the left side....wait 5 seconds with power off. Turn machine back on. If the code reapears, your Fuser Unit needs serviced.

Nov 13, 2009 | Ricoh Aficio 450 Copier

1 Answer

Display is showing code SC 542.

the error is for a heating eror in the fuser either toner build up on the thermistor or the thermofuse has blown if you have the machine turned on press the yellow clear button and then input 107 and then hold dowwn the stop button.. turn machine off and wait a few seconds then turn back on.. this should clear it if it was just a fluctuaction in temps.. if that doesnt work take fuser out and check the condition of the temp sensors and do reset again.. if the code stays on you will have to go into the service mode.. acccessed the same way as reset but you need to enter the copier sp and then go to 5.Mode and look for 810 this is the sc reset execute turn off and then on >>>>Hope this helps A

Jul 30, 2009 | Ricoh Aficio 1035 Copier

1 Answer

Printer wont turn on

for that problem may the printerhead have a problem may be your printerhead is overheated thats why you can't finish prinnting, try to pull out or remove the printer head and try to power on the printer if the printer is responced and power up again thats the time to change your printer head......

May 04, 2009 | Canon imagePROGRAF W6400 InkJet Printer

3 Answers

Xerox docucolor system fault problem

hi please chek and tell what error code showes in your display.. some error codes showing in ur display, pls check it that.

Aug 25, 2008 | Xerox DocuColor 12 Printer

2 Answers

Error message

Canon has a decent trouble shooting guide for this model: Click on the Step-by-Step Troubleshooting link under Tech Support Unfortunately for this error code, all it says is this: Turn the machine off, and remove the power plug from the outlet. About ten minutes later, plug it in again, and turn the machine on. If the problem is not resolved, the machine may require servicing. Please contact your local Service Center.

Sep 14, 2006 | Canon Pixma MP500 All-In-One InkJet...

Not finding what you are looking for?
Canon imageRUNNER 5020 Copier Logo

Related Topics:

1,061 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts


Level 3 Expert

93861 Answers

old marine
old marine

Level 3 Expert

1298 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides