I connected my laptop and it worked great. When I disconnect and went to watch TV my picture was...
(More)
I connected my laptop and it worked great. When I disconnect and went to watch TV my picture was blurrier what happened
Moved it to bedroom today - 3 years good service in living room.- plugged it and switched it on and...
(More)
Moved it to bedroom today - 3 years good service in living room.- plugged it and switched it on and volume goes to max and stays there and tv is stuck on 1 channel. Remote fails to address vol problem or change channels.
The internal freeview on my Samsumg LE40A556 has just stopped working. I can fun freeview through it...
(More)
The internal freeview on my Samsumg LE40A556 has just stopped working. I can fun freeview through it using a set top box however.
It just says no signal and the signal setting in the menu is greyed out.
I can use the aerial through another Tv so I know that the aerial socket is fine.
Every afternoon around 4:30pm digital picture and sound on Channels 3 and 4 start to break up; today...
(More)
Every afternoon around 4:30pm digital picture and sound on Channels 3 and 4 start to break up; today especially bad: Ch2 Bit Error = 0-1, Signal strength = 26-30, Ch3 Bit Error = 9, Signal strength - 20-29. So bad today picture is unrecognisable had to switch back to analogue. Last software download was T.GREEPEUO_1056 and that had to be sorted by local TV repair shop as update of new channels would not work via automatic update at home. Any idea what is causing problem? Before 4:30pm picture is great! After 7pm picture is usually OK too.