Question about Graco SnugRide - Giselle Infant Car Seat

1 Answer

No problem with harness but what about the extras?

I took the cover off to wash it. The harness was no problem to reassemble but the extra pieces are stumping us. There are 2 elastic loops that are supposed to secure on to some small plastiic poles. Where are the poles located exactly? I can't find them. Also on the edges of the seat cover are 2 plastic clips that appear to fasten to the edge of the plastic seat, but no matter where I put it I can't make it fit properly. HELP!!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had the same problem. The elastic loops loop forward, under the car seat handle, and attach to the plastic clips. You can get an idea of how it should go from page 13 of Graco's instruction manual (http://www.gracobaby.com/Instruction%20Manuals/ISPC090BB.pdf).

This may not be the instruction manual for your exact model--you can find your model number on a sticker under the base. However, the instruction manual for my model didn't include information about putting the seat cover back on after removing it to wash--the instruction manual I linked to above does.

Posted on Nov 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need instuction on how to reassemble safety straps on cosco car seat. I took apart to wash seat cover and don't remember how to reassemble


1. Find the same seat at your local store and take photos with your phone.

The position of the harness (slots in the plastic shell) is dependent on the height of your child.

2. Contact the manufacturer for detailed instructions

3. Find a certified Child Passenger Safety Technician or Instructor at safercar.gov.

Jun 21, 2015 | Cosco Scenera Convertible Baby Toddler Car...

1 Answer

Safety 1st model number 1c034 I took it apart to clean it and now cant put it back to together.... I have 2 extra medel pieces... HELP!!


Find a fitting station at www.nhtsa.gov. They will help you reassemble the seat. DO NOT GUESS!

-- Marc
Passionate Child Passenger Safety Instructor

Aug 13, 2014 | Baby Gear

1 Answer

Replace a key actuator pad that is torn bad


The rubber key cover is one piece and not sold as a spare part. Take the radio apart, remove the pad and put a thin tape, such as a very high quality electrical tape and a small amount of RTV silicone under the tear. Reassemble, wiping off any extra RTV as you go.

Nov 10, 2013 | Motorola Talkabout T5420 (14 Channels)...

1 Answer

I am working on a u5290-900 hover vacuum ,when operating dust leaks out under dirt cup cover. i put a piece of card board on top of cover so extra presure would be applied to the top of cover. this seams...


Dear Sir:
Will be better idea to replace the cup cover. The pice of card will not function for a long time.
Proceed before another extra problem coming.
God bless you
5_24_2012_9_42_21_pm.jpg

May 24, 2012 | Hoover U5290-900 Upright Vacuum

1 Answer

The 2 pieces that cover the lense came off,


This blog post outlines repair procedures for stuck automatic lens covers, and gives several examples on disassembly and reassembly. However, if you find that you are missing some pieces, you probably have already noticed that the camera works just fine without the lens cover. In that case, maybe consider leaving the shutters removed, and simply installing the outer lens ring to improve the camera's appearance. And pay a little extra care in protecting the lens, possibly by storing and carrying the camera in a camera case.

Oct 28, 2011 | Canon PowerShot SD790 IS/ IXUS 90 IS...

1 Answer

How to get to filter on aquarius extra washing machine


Remove lower rear panel of washer.
Locate and remove the large black hose fastened to bottom of drum.
Remove and clean plastic filter inside hose.
Reassemble in reverse order.

Dec 16, 2010 | Hotpoint Aquarius WF220 Front Load Washer

1 Answer

Hotpoint aquarious extra wd63 motor mounting broken


Made a new mounting bracket out of a piece of flat bar. Machine has never run so quietly!

Jun 13, 2009 | Washing Machines

1 Answer

Need help reassembling the straps after washing the seat cover


First turn seat upside down. There should be a slot on each side under the seat, run strap through each slot and turn back over. Pull strap up evenly, put on clasp part on each side, then put chest clasps on, run your straps through back and secure to strap comes between legs.

May 08, 2009 | Century Encore 5-point Harness

1 Answer

Harness straps off cosco car seat to wash cover, help reattaching


I need help putting the straps back on a Cosco 5-point car seat. Took it apart to wash and can't get it back together

Mar 08, 2009 | Century Encore 5-point Harness

Not finding what you are looking for?
Graco SnugRide - Giselle Infant Car Seat Logo

785 people viewed this question

Ask a Question

Usually answered in minutes!

Top Graco Baby Gear Experts

Joyce Nokleby

Level 2 Expert

70 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

john milligan

Level 3 Expert

514 Answers

Are you a Graco Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...