Jenn-air slide in range/convection

F5 - Hardware and watchdog circuits disagree
Replace clock assembly (also called the ERC)
Here is the part to order.
There is a video on that same parts page to show you how to make the repair.

All parts come with a 365 day, any part, any reason return policy.

Hello - Most likely failed lower burner ignitor. Tests good if above 4ohms. Part is 40$. Can give replacement instructions if needed. Let me know if this helps. Thanks. -ED

Replace the clock first(electric control) then test the oven it could be that it's why the oven does not work.

All burners work fine, clock display is blank, if the oven isn't working either, your display / control board is shorted out

Is it a good coil ignition gas oven? If so. Try replacing that part. My guess is it isn't hearing up enough t9 fully open the burner

could be clock motor or fan motor keeps running.

small circuit board in back for fan & LIGHT BAD.

Why are the oven indicator lights flashing? Answer: When power is first supplied to the appliance, a flashing time will appear on the display.
If a flashing time appears at any other time, a power failure has occurred. Press Cancel, and reset the clock if needed.
When the oven is not in use, the display shows the time of day.
If the indicator lights keep flashing after you have tried to reset the controls, then you may need to contact service person.

This is from the Jenn-Air website.

sounds like you lost power to your stove. if you can't reset the clock, it needs to be replaced. in otherwords, the power outtage shorted out the clock.

have a technician replace it.

its not a loose wire. jenn-air is famous for having to replace the display board. once you replace it it will be fine