Question about One For All URC-4021 Remote Control
I need the set up info and code for my 'oneforall universal remote for my Goldstar dvd/vcr combo. When I search the web site for Oneforall, the search results are zero. My Oneforall remove no. is URC-4021B00. I also see that it is not on the list. Only URC-4021.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: oneforall URC-1030
The codes for a
Phillips TV are: 11232 and 11111
Sharp TV are: 11313, 11424, 11214 and 11412
Mitsubishi TV are: 11344, 11414, 11131, 11144 and 11443
Give them a try,
Posted on Sep 15, 2009
Tips for a great answer:
Jun 23, 2012 | Televison & Video
0154, 0236, 0463, 0180, 0178,
The One For All 4 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, a Motorola cable
box, and an RCA VCR.To control devices other than the default brands,perform
the following steps; otherwise skip this section:
 Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
 On the remote control,press a device key once (i.e., VCR/PVR,
DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press VCR/PVR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD once.After programming
a DVD Combo device, you will be able to control channel selection,
volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
 Press and hold SET until the LED (red light) blinks twice,
then release SET.
 Use the Manufacturer's Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
 Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next
NOTE: If the device does not have a POWER key, press PLAY
Sep 26, 2011 | One For All URC-3021 Remote Control
Oct 26, 2009 | Sylvania 6719DC 19 in. TV/VCR/DVD Combo
Sep 23, 2009 | One For All URC4220 Remote Control
Feb 04, 2008 | RCA Universal Remote 3 Device Remote...
113 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: