I am trying to change the setting on the printer, however when i change the setting to print it is not accepting the changes when i start the printer. the setting are not saved. Helllllppp
Comments:
Dec 19, 2007
- On the IBM infoprint 6500 i am trying to change some of the print setting ie. Forms length, Print quality the setting does not change when you start printing, it goes back to the original setting.
The ink ribbon is fine and the platen is set right but the pages of the reports run through the...
(More)
The ink ribbon is fine and the platen is set right but the pages of the reports run through the printer as normal but no ink shows on the paper. Stopping the print job, opening the platen and closing it back causing the ink to start showing. Just curious if this is a common issue that arises from not setting something up properly or if it is a manufacturer's defect. DM
two spool files are generated from a single job the first one (the front page) with 10 cpi and the...
(More)
two spool files are generated from a single job the first one (the front page) with 10 cpi and the second one with 15cpi. 1) the Richo 6500 printer is set up to accept host commands (including at the cpi level). The 10cpi file prints fine but the 15cpi file prints with 17.1cpi. It looks like the printer changes the cpi size itself. Please, can anyone help? doumarou2002@yahoo.fr
IBM Infoprint 6500 V10 Message:"304 barcode damaged reverse ribbon spools" How to make to...
(More)
IBM Infoprint 6500 V10 Message:"304 barcode damaged reverse ribbon spools" How to make to solve this problem?