Question about Nikon D40 Digital Camera with G-II 18-55mm Lens

Open Question

If it's really loose with very little resistance

The focus is really loose with very little resistance or no drag
if i put it in a vertical position the focus turns itself. would be grateful for any advice and likely cost of correcting.

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 147 Answers

SOURCE: viewfinder component loose. Pointing upwards has

I know that this is not the answer that you were hoping for. However this one is best left for a reputable camera repair shop or better even send it directly to Nikon for service. Here is the link to Nikon service request http://form.nikonimagesvcapprove.com/

Posted on Jul 13, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 ford focus car was stuck in snow and when I finally got out of the snow bank, my car now has something hanging from the front end and it is making a really loud noise. It is having trouble exc


This is probably just a splash guard that came loose under the car and hitting or dragging. Take a look under for something big and plastic that looks out of place around the wheel wells and under the bumper.

Feb 16, 2015 | 2000 Ford Focus

1 Answer

I have a 99nighthawk 250cc cbx. That stall when put in gear. I've disconnected the kjckstand witch but still stall when put in gear. Starts & runs fine while in nuetral can someone plz. help ?


Pull the clutch lever in and see if there is any resistance. If it has little or no resistance at the lever, it has air in the line(if hydraulic) or the clutch cable needs adjustment. The clutches are probably not fully disengaging (dragging)which could be why it turns off when placed in gear.

Jul 26, 2014 | Honda Motorcycles

1 Answer

Picture adjustment


if your vertical section of your mother board has a vertical adjustment trimmer, adjust it to reach your desired vertical size..if doesn\'t have, increase the resistance of the resisitor only connecting from cold ground to the negative of the e.cap and the positive pin of e.cap connecting to the line 1 of the vertical focusing coil. the common value of the resistor you would focuse is 1ohm, try add with .5 or 1 ohm depending with vertical size result.

Jan 03, 2014 | Televison & Video

1 Answer

Tv came in shop with shot down problem ,checks were made and a resister for the vertical supply was open..after replacing , set come on only with insufficiant vertical sweep at top and bottom.. am at my...


Have you checked all the solder terminals of the vertical output IC, for any loose contacts? Check it. Re-solder all the suspected solder terminals by applying a little more solder. Check all the low value capacitors at the vertical output section circuit. Replace all of it at once, with same capacitance and voltage ratings. If these do not help you, have to enter its service mode option to adjust the vertical height, linearity etc: By the way, what is the brand name to your TV? What is the number of IC used as vertical scan output. For more information: http://electronicshelponline.blogspot.com/

Nov 18, 2013 | Televison & Video

1 Answer

Does this monitor have a tile mechanism?



If you are speaking about TILTING. Yes it does have a tilting ability.
If your speaking about actual TILING on your monitor, that is done from your computer it self.
How to Enable Screen Tiling and Resizing on Monitor If you constantly have 2, 3, or 16 windows open on your computer, WinSplit Revolution can help you organize your space. This little Windows utility automatically resizes and relocates windows making it easy to stack your programs vertically, horizontally, or in little boxes.

The program isn't really that useful if you've got an 800 x 600 pixel display, but if you've got a high resolution widescreen monitor, WinSplit Revolution can help you make the most of your space. You can assign keyboard shortcuts to various positions. For instance, one hotkey can maximize the current window, while another can unmaximize it and drag it to the left side of the screen.

Jan 31, 2011 | Acer X223W Monitor

1 Answer

Monitor has all in a horizontal position,want vertical


do you mean the task bars? if so click on them and drag them back down to the bottom of the screen

Sep 03, 2008 | Logitech 967437-0403 Keyboard

1 Answer

Brother MFC 6800 printing blank pages after fuser, toner, and drum was changed


hi
i have the same problem after replace the fuser
the problem is in the little board ,where all the connectors are on
the , 7812a , a positive voltage regulator ,was loose ,

only resoldering and ok..!

excuse my english, i write from el salvador , im really never speak english, but i just try to help
reggards..!

carlos c.

Apr 07, 2008 | Brother MFC 6800 All-In-One Laser Printer

2 Answers

Leica III camera focusing problem


Yes, if the vertical misalignment is small, say, about less than a tenth of the image size that is misaligned vertically, then try rotating the 'lens' that covers the front left (as viewed from front of camera body, in upright position) rangefinder window.That is, the front RF window near the slow speed setting dial. In order to do so, you will need to unscrew the decorative chrome bezel first. Unscrew in counterclockwise direction. Do not use pliers, etc. to remove bezel, or you will possibly distort and/or mar the chrome finish. Instead wrap bezel with two, or three layers of making tape, making certain masking tape is not contacting the body of the camera, but only the bezel. Usually, bezel can now be unscrewed by hand only; if not, use pliers gently with the masking tape acting to protect the bezel's finish. Once the bezel is off, the lens (it's actually a glass wedge prism) can be rotated using the prongs of a tweezer inserted in the two notches of the brass ring encompassing the 'lens', or glass wedge. First, rotate in both directions, cw and ccw, in small angles to determine which direction and how much wedge rotation is required to bring the two rangefinder images into coincidence vertically. Reassemle in the reverse order.

May 19, 2007 | Leica IIIg 35mm SLR Camera

2 Answers

Focusing screen question


Pentax make three different screens for the D and DS. Go check their homesite, or do a search here. None of the Pentax oriinal screens has microprismes or split image. They are engraved in different ways.

Sep 08, 2005 | Pentax *ist DS Digital Camera

Not finding what you are looking for?
Nikon D40 Digital Camera with G-II 18-55mm Lens Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Cameras Experts

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Ric Donato

Level 2 Expert

225 Answers

Are you a Nikon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...