Question about Panasonic TX-32LXD1 32 in. LCD Television

1 Answer

Have retuned and have lost Channel 5 (we did have it before)! Newer tv in another room, does have it after retuning. Thank you

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,653 Answers

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Posted on Oct 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to retune freeview tv


You need to do a Full Factory Reset tuning rather than just a rescan.

Rescan simply looks at the place holders where the old channels were stored and refreshes them. A Factory Reset (A.K.A. Shipping Condition) wipes the channel memories and starts again fresh.

Sep 07, 2014 | Sony BRAVIA Televison & Video

1 Answer

Samsung retune


Hi, Try this go to menue on tv run the channel scan function.
If you are using a PVR or Tivo do the same with that, But you will have to set your TV to channel 3 to get your PVR/Tivo going. or in some TVs TV1 or TV2...depending how you hooked it up.or if you have HDMI cable... Good luck

Feb 11, 2014 | Televison & Video

1 Answer

Have lost chanel 5 and others on my panasonic dvd recorder since national retune.How do i retune my dvd recorder?


It seems others have had this problem too, but there seems to be a generic solution to it. Unplug the device from the mains and leave it without power for a few minutes. Then, reconnect your device. That should solve your problem.

Back to your question about retuning it, you have to hold the channel up and channel down buttons at the same time for a few seconds. Auto-setup should start.

Hope that helps,

Thomas

Oct 10, 2009 | Panasonic DMR-EH60 DVD Recorder/HDD...

1 Answer

I can get channels 1 to 4 can't get channel 5 and no freeview


Hi, I had the same problem, try removing your aerial from the box - retuning and saving so it blanks out all previous channels and then reattaching the aerial and doing another retune, this worked for me. Good luck.....

Oct 06, 2009 | Televison & Video

1 Answer

Lost channel info for channel 5 on my DVR Digifusion FVRT 145 since end of sept. Most other listings are still being downloaded


First I emtied all listings by retuning with arial unplugged . then did full channel search with ariel reconnected . Left unit on standby overnight all channel listings reapeared.

Oct 05, 2009 | Digi Televison & Video

1 Answer

Attempting to retune channel 5 was asked to return to factory settings answerd Yes and lost picture, sound and channel changing still O.K.Please advise.Don.


You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit
http://tvretune.co.uk/productmanuals

Oct 02, 2009 | Sharp Aquos LC-37GD6U 37 in. LCD HDTV

1 Answer

Techwood freeview


Any luck? I lost channel five to channel 802. I want to change it back to it's slot after channel 4

Jun 09, 2008 | Televison & Video

Not finding what you are looking for?
Panasonic TX-32LXD1 32 in. LCD Television Logo

564 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5113 Answers

The Knight
The Knight

Level 3 Expert

74185 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...