Question about Juki HZL-E61 Computerized Sewing Machine

Open Question

Juki hzl-e61 auto stitch length green light will not stop flashing

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: needle thread breaks while quilting on machine frame

I think you might have better luck if you use 40 or 50 weight thread.

Posted on Dec 20, 2008

sew dutch
  • 24 Answers

SOURCE: Juki HZL-E61: cannot get tension right on straight stitch

Loops on the bottom of the fabric direct the problem to the top thread. Rethread again and make sure the thread goes through the tension discs. Lift the foot, because this is what opens the discs. When sewing and the foot is down, the discs should be closed and thus giving the upper thread the tension it needs.

Posted on May 25, 2009

  • 3 Answers

SOURCE: double needle use on Juki HZL-E80

if the machine regular needle threads front to back NOT side to side, you can use a double needle. simply pass both threads thru all the same slots (thread one at a time so they don't get twisted up) then just before the needles, leave one out of the thread guide just above the needle. you may have to loosen the top tension SLIGHTLY, like a half number. and do NOT use a zig zag stitch without first hand cranking it thru the cycle to be sure the needles clear, or you'll make a 5.00 mistake (the cost of the double needles!)

Posted on Jun 16, 2009

  • 47 Answers

SOURCE: Manual Guide for Juki Frou Frou HZL-11

Visit us at www.ifixmachine.com

Posted on Jul 24, 2009

  • 4 Answers

SOURCE: Needle Thread breaking after about 30 seconds of quilting

Are you threading it correctly? I've had this problem twice, the first few times the thread was wrapped around different items (below the spool holder and then around the needle) the other times I threaded it wrong. Double check that the machine is threaded correctly with the manual. I've missed a step here or there and it does make a difference.

Posted on Jul 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Juki hzl_e61sewing machine


Sounds like a safety feature, ie is it getting too hot? May take it for service.

..

Oct 10, 2016 | Juki HZL-E61 Computerized Sewing Machine

2 Answers

Why is it seizing up and clocking after doing basic sewing?


Juki HZL F300 Exceed Sewing Machine at Ken's Sewing ...

www.kenssewingcenter.com/juki-hzl-f300-exceed-sewing-machine-p-30...
The Juki HZL F300 Exceed Sewing Machine is a classroom model and will exceed ...High speed sewing up to 900 spm, stitches per minute; Power at low speed ...

Juki HZL F300 Exceed 106 Stitch Computer Sewing and ...

www.allbrands.com/products/22395

$749.00 - ‎In stock
Juki HZL F300 Exceed 106 Stitch Computer Sewing and Quilting Machine +$50 Knee Lift Lever + $50 ... High speed sewing up to 900 spm, stitches per minute

Juki Exceed HZL F300 Home Deco Computerized Sewing ...


Dec 01, 2015 | Juki HZLF300 Sewing Machine

2 Answers

Fabric won't move doing straight stitch.


Be sure that the stitch length is set to a higher number. The closer to zero it is set, the closer the stitches will be until zero when it will actually be sewing in one place.

...

Nov 10, 2015 | Juki America, Inc Juki HZL-27Z 22-Stitch...

2 Answers

User Manual


JUKI SERVICE MANUAL

dixiesewingmachine.tzo.com/JUKI%20SERVICE.htm
APW-231,232,235,236,239,240 ENGINEER MANUAL.pdf, File, 3.07 MB. APW-297&298EM01_e. ... .pdf, File, 1.08 MB. DMN-530-4 Instruction Manual (No.02) BE5304S0B0A.pdf, File, 777 KB ... DP-2100 EM00_e.doc, File, 67.8 KB. DP-2100

[PDF]HZL-F series - JUKI

https://www.juki.co.jp/household_en/hsm/pdf/f-series_en1209.pdf
any other user servicing adjustments mentioned in the instruction manual. 11. ... can be used on sewing machine model HZL-F300, HZL-F400, or HZL-600.

Oct 27, 2015 | Juki Sewing Machines

1 Answer

Requesting support: juki HZL F6000 suddenly stopped sewing straight stitching in a straight line. Also stopped automatic treading.


the machine may need to be serviced, the needle bar may need adjusting, also could be something wrong with the motherboard

Dec 08, 2014 | Juki Sewing Machines

1 Answer

How do i stop juki ddl from top skipping stitches?


Hi. Skipped stitches are usually caused by a mismatch in your thread and needle. Wrong thread type, wrong needle size, or even old thread can cause skipped stitches. If all else fails, change the needle. If that doesn't work, clean the machine. Sometimes just getting rid of all the lint and giving her a good oiling does a world of good.

Let me know if this works.

Robbie

Jan 10, 2010 | Juki HZL-E80 Computerized Sewing Machine

1 Answer

Double needle use on Juki HZL-E80


if the machine regular needle threads front to back NOT side to side, you can use a double needle. simply pass both threads thru all the same slots (thread one at a time so they don't get twisted up) then just before the needles, leave one out of the thread guide just above the needle. you may have to loosen the top tension SLIGHTLY, like a half number. and do NOT use a zig zag stitch without first hand cranking it thru the cycle to be sure the needles clear, or you'll make a 5.00 mistake (the cost of the double needles!)

Jun 16, 2009 | Juki HZL-E80 Computerized Sewing Machine

1 Answer

Juki HZL-E61: cannot get tension right on straight stitch


Loops on the bottom of the fabric direct the problem to the top thread. Rethread again and make sure the thread goes through the tension discs. Lift the foot, because this is what opens the discs. When sewing and the foot is down, the discs should be closed and thus giving the upper thread the tension it needs.

May 25, 2009 | Juki HZL-E61 Computerized Sewing Machine

Not finding what you are looking for?
Juki HZL-E61 Computerized Sewing Machine Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Juki Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Pete Alaniz

Level 1 Expert

13 Answers

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Are you a Juki Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...