Question about Brother IntelliFax-2820 Laser Fax

1 Answer

MEMORY FULL. BROTHER HL-4070CDW. WHAT TO DO - Brother IntelliFax-2820 Laser Fax

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 352 Answers

According to your product's manual, you need to install more memory into your printer. The printer take SO-DIMMS.

The other thing I would try doing is resetting the printer to see if that will clear the memory cache. There are two reset options that can be found under the Reset menu:

  • Reset Printer - resets the printer and restores all printer settings (including command settings) to settings you have previously made with the control panel buttons
  • Factory Reset - resets the printer and restores the printer settings (including command settings) to the default settings. You will lose any settings you have made yourself. Your printer will be just as if you just bought the printer.
Good luck.

Posted on Dec 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brother HL-4070CDW still prints page upside down in duplex.


Check the duplex settings, often you have a choice on long side or short side for duplexing. If short side is chosen then it will print duplex as though you are making a flip chart not a book

Nov 10, 2014 | Brother HL-4070CDW Printer

1 Answer

Hi. When we print color pages, on our HL-4070CDW, there are colors on the edges of the paper...usually on the right side of the paper. Sometimes it's yellow or red, etc. How do I resolve this?


You need to clean your corona wires. Go to Brother support website. Look for Problem 100000012419 and follow steps in solution 200000015852.

Sep 16, 2011 | Brother HL-4070CDW Printer

1 Answer

I have a Brother HL 4070CDW printer and the Dum end soon light will come on daily. What does this mean and how do I fix this problem? If you need to please call me at 412-452-5975. Thank You, Rebecca...


Hi there !

Don't worry, it does not detect any hardware failure. Drum end near means that your toner is lower and soon it will end.

If you just replaced new toner and still drum end near message comes up. Just make a hard reset of your printer by removing the cartridge and turning off the printer in 5-10 minutes. Then return the cartridge and try to print again. It will refresh the memory of the printer and the message will disappear.

I hope it helps you.

Jan 14, 2011 | Brother HL-4070CDW Printer

1 Answer

Why is there a hazy back ground to printing on Brother HL 4070CDW?


The DRUM is faulty, you need to replace it, but check first with Brother for warranty, they may replace it for free.
www.brother.ca

Jan 03, 2011 | Brother HL-4070CDW Printer

1 Answer

Brother 4070cdw waste toner is there a way to empty it


Messy.
Best to replace the waste toner collection unit.

This is a user replaceable, consumable part.

Dec 10, 2009 | Brother HL-4070CDW Printer

1 Answer

Brother 4070CDW Shadowing Problem


Check your toner if they are properly installed.

Check your drum if they are properly installed.

Clearn your toner and drum.

Print a test page.

If nothing happens please replace your printer drum

Sep 19, 2009 | Brother HL-4070CDW Printer

1 Answer

Color spots on left margin when printing with my HL-4070CDW


Replace the cartridge if that dont do it its the write head fouled up with ink or just plain died all togeather, dried ink can cause this to happen check and see if you can clean it out with 70 percent isp. alcohal if the issue still does not resolve its new printer time.

Apr 22, 2009 | Brother HL-4070CDW Printer

Not finding what you are looking for?
Brother IntelliFax-2820 Laser Fax Logo

Related Topics:

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

James Cagle
James Cagle

Level 2 Expert

453 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...