Question about Fisher and Paykel DEGX1 Electric Dryer

1 Answer

Fisher & Paykel Auto Sensor Dryer stops & beeps constantly

My Fisher Paykel auto sensor dryer keeps stopping and beeping, i have to stop it and and re start. This started after I forgot to keep the door to the laundrey open when drying a full load, now the dryer only works if I heat the room to 25 degrees, and even then it intermitant, is it time to buy a whole new dryer or can it be repaired?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi emkboyce

my Fisher Paykel auto sensor dryer keeps stopping and beeping, i have to stop it and and re start.

I had the same problem. I took it off the wall and vacuumed up all the lint from everywhere including around the back and including taking off the back and vacuuming everything I could reach inside. I then used a damp cloth to get rid of the rest of the lint/dust.

I thought I was wasting my time but guess what, the problem has gone.

Good luck!

Posted on Nov 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fisher paykel dryer ed56


Could be the door switch or temp sensor. To check the door switch put pressure against the door and see if it stops. Check the slot the door hits to see if there is anything loose in there.

Jul 20, 2013 | Dryers

1 Answer

F&P ED56 has 2 problems


Yes, (2) certainly sounds like the start/run capacitor has failed. You will see it has a split or bulging case, or a displaced end cap. Replace it with one of the same voltage rating and capacitance.

I can't advise you on (1)

Jun 20, 2013 | Fisher and Paykel Dryers

2 Answers

Hi there my fisher & paykel ed56au dryer has a similar problem to those listed it turns momentarily and then stops and beeps continually - two lights on the dryness setting comes on - has anyone found...


Hi,

There can be many reasons why your dryer will not start or turn...


The most common causes are the belt breaking or jumping off, or the motor going bad...

Here are a couple of tips that I wrote will help you to figure out why your dryer will not run...

Dryer Repair - The Dryer is not Turning
http://www.fixya.com/support/r4422207-dryer_repair_dryer_not_turning

Dryer Repair ? The dryer will not start
http://www.fixya.com/support/r4460438-dryer_repair_dryer_will_not_start


heatman101

Aug 17, 2010 | Fisher and Paykel Fisher & Paykel Washer

2 Answers

Beeping dryer


In all likely-hood a sensor or the like has failed, or even perhaps the micro... Check ALL the sensors, Try a reset if able to do so. Give the Bowl a good shove side to side, & around, to perhaps help any sensor problems. generally though they are pigs of things. If you must go to a repair place ensure you get a firm "Quote" before proceeding.

Jan 30, 2010 | Fisher and Paykel DEGX1 Electric Dryer

1 Answer

Fisher & Paykel Dryer model ED56 constant beep


Diagnostic Mode
Entering the Diagnostic Mode
(a) Turn the power supply to the dryer on.
(b) Press and hold the Auto Dry down button, then press the Power
button.
The dryer is now in level 0 of the diagnostic mode. After initial entry into the
diagnostic mode, the Start/Pause button operates the dryer as normal. Press
the Auto Dry up or down buttons to scroll through the fault levels.
There are several levels of diagnostics, most of which are used in
development and production. These levels may bring on various LEDs, but
the level of use for the service technician is that of the last fault.
Last Fault
To enter the last fault diagnostics, enter the diagnostic mode as described
above, then press the Auto Dry up button three times. The last fault will be
displayed on the drying progress LEDs.
The manual is here

Sep 08, 2009 | Dryers

1 Answer

The dryer won't run. Dry, extra dry, and coold down process lights are lit.


Hi, the lights are signaling a control fault the is concerning the logic sector of the control board/timer. you will need to make sure that the wiring harness is connected to all points and it should be in good condition. if there are no apparent issue with the wiring harness, replace the control.

May 29, 2009 | Fisher and Paykel DEGX1 Electric Dryer

2 Answers

F 1 Error, blinking, beeping and will not stop even when turned off, so we had to turn the circuit breaker off to stop the noise.


You have a leak.
Either from the top lid seal or bottom lid seal. A s time goes by the water level activates the sensor causing the beep. It won't do anything until you fix the leak.

May 25, 2009 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Dryer tries to start - then stops and beeps PLEASE HELP


Check the exhaust hose. If the dryer isn't venting properly it will either stop or the heater will turn off and the clothes will remain wet. If the hose is not clogged check the wall vent tube.

Apr 29, 2009 | Fisher and Paykel Dryers

Not finding what you are looking for?
Fisher and Paykel DEGX1 Electric Dryer Logo

Related Topics:

2,699 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3072 Answers

Bill Eager

Level 3 Expert

429 Answers

Are you a Fisher and Paykel Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...