Question about Burton P1 SNOWBOARD BINDINGS SIZE LARGE 10-14

1 Answer

I just want to ask if the Burton P1.1 2009 LARGE bindings will fit to my 24cm width board Thanks in advance

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 121 Answers

Hi,

Should do... Though to be safe I'd take a measurement of the board width to the shop with you and have a look at the bindings on a board of similar width..
Better still bring the board and your boots in with you and have them fit the binding and then try it for feel before you buy..

Posted on Oct 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Salomon 2005 kiana fitting with burton lexa binding- size advice


A huge proportion of footwear of all sorts are made using sizes taken from the standard Italian last. It has become a sort of tradition because Italian shoes have been world reknown for elegance - as a nation the Italians have notoriously narrow feet. People who don't have "Italian" feet usually need to buy shoes based on width fit in order to achieve comfort and in doing so will often end up buying shoes that are up to three sizes too long..

Add into this unsatisfactory situation the fact that not all manufacturers cut on the generous side, as with clothes, and the further problem when shoes are produced in metric and then converted into British or American sizes that rarely coincide, providing low cost manufacturers a further opportunity for meanness and rendering the more expensive footwear generally superior as being much closer to the size printed on the shoes or boots. Buying shoes and boots these days with preconceived notions about what size you need is a pathway to unnecessary expense and discomfort and much disappointment.

Only expensive children's shoes, exclusive brands, a very few specialist and bespoke shoes are available in a variety of width fittings for each size, leather shoes do have the benefit of "bedding in" but shoes and boots made of synthetic materials rarely do and if they do it is a slow process.
People who must buy mailorder often order two, three or more pairs at once in order to make comparisons.

If you are not in a position to do that I suggest you either have your feet measured for width and length or obtain the instructions to measure them yourself and then provide the measurements to the shoe or boot supplier or manufacturer and request they supply boots to fit the width of your obviously non-Italian feet.

Jun 26, 2017 | Salomon Winter Sports

1 Answer

I have an evol snowboard (derric swinfard model) and was looking to purchase a pair of burton custom binding because the price is right, but someone told me they might not fit. does anybody have any...


yeah the burton custom bindings will fit they have a 3 bolt pattern but the base of the binding will turn to fit it wont have the 4 bolts like most binding but fits the same (please rate me)

Oct 22, 2010 | Evol Freedom 150cm Snowboard

1 Answer

The base of my burton stria 2008 delaminated the stripes are popping out but it is not under warranty anymore. i just recently bought the escapade est bindings so i am stuck with burton. The stria model is...


You're situation is not uncommon. I have dealt with bases de-laminating like this several times in the past and it is usually always due to something causing the glue to become brittle and fail. Whether this due to wear and tear will depend on the condition the base is in. If the base is all torn up and has gouges along the edge of the rails then no one will take it seriously because it could have been water damage. If, however the base is in good condition then you should still have a chance of getting it warranted. Contact Burton or better yet contact your area sales rep, explain your situation and your loyalty to Burton (even if its waning a bit now) and ask them what they can do. If they are cool they will at least hook you up with a really good discount on a new board. Also if you ahve a good shop near you (or better yet the one that sold it to you) then go in and see if they are keen to help.

I always fought for people in your situation so with a little luck you will fond someone else who wants to help too.

May 13, 2010 | Burton Stria Snowboard 2008

1 Answer

Do the ride viper contrabands fit on the new burton boards using the channel system or the retro fit system for the new burton boards


They wont fit directly as Ride bindings are made of very lite metal and need all four screws to stay secure. The best idea is to buy the matching Burton binding or avoid the channel system and stick with 4 x 4 brands

Apr 23, 2010 | Viper Ride Contraband Snowboard Bindings

1 Answer

Snowboard boots with reduced length


You may also want to look at how you are setting up your bindings. I have a US 11 foot (29 cm) and with my bindings set correctly have never had any issues with toe or heal drag.

The best way to set up your bindings it to take them off, remove the mounting screws, keep the base plates in and fit your boots into your bindings with the straps still undone. Then, with the board on the floor, position the binding at the angle you like (roughly) and look to see when the toe and heel over lap is even or if you are like me pull the bindings back slightly so that you have little or no toe drag and just little heel drag. It works a treat and I have done this for over a hundred customers over the years.

Mar 15, 2010 | Burton Boxer Snowboard Boots

1 Answer

Boy just got a burton hero board, put on his danny kass bindings. The EST system for binding attachment seems to stink. Only two screw attachment, they immediately loosen up. How to attach tighter?


The Hero is designed to work with Burton's special two bolt system. The base plate on the Burton bindings is much stiffer than standard (like the on the Kass's) so will flex and loosen quickly. The best solution if these were both bought together from a store is return them as they should not have been sold together. If this is not possible then sell the bindings and buy the correct Burton model. If this is not fixed the mounting screws will eventually damage the board and need costly repairs.

Mar 06, 2010 | Burton Winter Sports

1 Answer

How do Lamar bindings line up against burton


Burton has a different pattern for their bindings then everyone else. The good news is that the standard pattern will fit on burton boards. You just need to use 4 bolts on the lamar bindings rather then the 3 you would use with burton.

Oct 18, 2009 | Lamar Winter Sports

1 Answer

Snowboard binding


No womens large bindings are rated womens size 8 or larger, and mens 7-9. If you have burton bindings you can shorten the adjustable strap. but make sure you strap in and when you crank down the straps you should not be able to move your boots or wiggle them around.

Feb 26, 2009 | Flow M9 Snowboard Binding

1 Answer

I don't know how to change the ankle strap


You have to losssen the screws on the sides with the 04 models i believe. otherwise you push down and the pull the strap to the sideand it should pop out when you pull it back up. But I think the 04 year was screwed ninto the base.

Dec 28, 2008 | Burton GRIP FIT CAP STRAPS FOR SNOWBOARD...

1 Answer

Boot size fit to board width


8 or Smaller Board Width 24cm or less (Narrow) 8.5 - 10.5 Board Width 24 - 26cm (Regular) 10.5 or Larger Board Width 26cm or More (Wide)

Dec 01, 2008 | Kicker Forum SLR Snowboard Boots

Not finding what you are looking for?
Burton P1 SNOWBOARD BINDINGS SIZE LARGE 10-14 Logo

Related Topics:

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Burton Winter Sports Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Todd Arndt
Todd Arndt

Level 3 Expert

2044 Answers

Are you a Burton Winter Sport Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...