Question about Washing Machines

1 Answer

I have a beko 1510s washer drum not spinning at all

I have a beko 1510s washing machine and its been great for the past 4 years. A couple of weeks ago it got noisy but still working, then yesterday I went to take some clothes out and some where dripping others bone dry so I turned it on again to see what happens. The drum wasn't spinning so this morning I got up expecting to find the belt had snapped or something but when opening the back it had just come off and is undamaged so I put it back on (sore fingers) tried the cycle again and the drum spun for all of 60seconds then stopped I heard it pop off so I repeated the whole process again thinking I was being a girl about the whole thing, But again once on it lasted seconds then popped off again. Please help!

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 61 Answers

The noise is possibly the bearings, if these are loose the tension on the belt will not be kept, no tension the belt will fall off. you have to check the bearings, empty the drum of clothes and lift the rim of the drum you should feel a loosness before the tub moves. Drum is the stainless steel bit Tub is the plastic but the drum sits in. if this (as I suspect) very loose your bearings are gone, alternativeley if not it could be the belt tension thats too loose, you might have some adjustment on the motor bracket for this or a new belt. but if the bearinings its cheaper to replace the machine than the bearings due to labour costs. insurance may cover it?

Posted on Sep 30, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Zanussi Jetsystem Turbodry1600XC WJS1665W drum not spinning

open the back and see what is working or not working. could be a bad belt

Dec 07, 2017 | Washing Machines

1 Answer

Maytag washer (model PAVT244AWW). Won't spin. Don't know how old it is or its history, as it came with a home we purchased in October. Several times it's "walked" during the spin cycle. About 6 weeks...

Its the clutch ,And it sounds like it time for a new washer,the clutch is expensive and washer are cheap try a second hand store that sale scratched or almost new machines

Jul 05, 2010 | Maytag PAV2300 Top Load Washer

1 Answer

Beko wma1510s washing machine dial problem

my beko wma 1510s will not spin and is heating up

Apr 11, 2009 | Washing Machines

1 Answer

Hearing "sqeak" from the machine as it washes or slows down from spin cycle, like a rubber sqeegee sound. Just started about 4-5 weeks ago. Machine is 4 years old. Is somthing stuck in the drum gasket...

yo can cain acess to the unit by removing the lower aceespanel, fom ther eperhaps you determine where tehsqeak iscominfform ( top panel also removess with 3 screws across teh back

Mar 05, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Washin Machine Spinning Problem

The main tub bearing is stuffed, thus the noise. The spindle becomes loose and the belt rides off. Bearings can be replaced.
Hope that helps.

Sep 07, 2008 | Hoover AL130 Front Load Washer

1 Answer

I have a Beko washer WMA 1613S and recently the programme dial is skipping through the set wash functions without performing all the relevant actions in the cycle. This seems to occur on all number...

I have a Beko washer WMA 1510S and recently the programme dial is skipping through the set wash functions without performing all the relevant actions in the cycle. This seems to occur on all number settings.


Aug 30, 2008 | Washing Machines

1 Answer

Beko 1510w or wma 1510s wasting machine

it is quire a difficult job to do and don't recommend if you have no experience

Jul 18, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

79847 Answers

Brad Brown

Level 3 Expert

17151 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides