Question about Biostar P4M800-M7A Motherboard

1 Answer

P4M800Pro Intel Pentium 4

So my computer stopped working after it wouldnt boot up


I turned it on the disk drive went on the HD was spinning and all the fans were going but the light that blinks when the computer is doing stuff just stays on all the time and doesnt boot or beep

Ive unplugged the HD and CD and plugged it back in
Changed the ram
Unplugged and reset it
Tried booting with XP disc
Took out and put back in all extra things in the modem slots and whatnot


but it still wont start up but im not sure if its cpu or the motherboard since the cpu looks fine

Posted by on

  • drakwrath10 Sep 30, 2009

    Well i was sure it was motherboard but the computer sucks in the first place so i don't want to waste money on a motherboard that i know has frequent problems

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 98 Answers

Sounds pretty much like a motherboard problem. The problem you describe sounds like a RAM problem, probably they are loose in the slot or not snuggled properly. However, since you seem sure its not the RAM, I would consider replacing the motherboard.

Posted on Sep 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What does flashing globe on white screen on mac meanmacbook pro


If by flashing globe you mean spinning globe (often a colored beach ball), there are several possible reasons. The spinning beach ball happens when a operating system command cannot be completed. The computer is frozen/stuck in a process that it can't complete.
Most often the cause is faulty or missing information on the hard drive. Running Disk Utility will often fix it. You may need to start the computer from your OS install disk and rather than install find Disk Utility in the pull down menu and run it on your hard drive.
The spinning ball could also be caused by insufficient RAM memory to even run the operating system. It could also be caused by hardware problems which can be diagnosed with the Apple Hardware Test found on the disks sold with the machine.
If you truly mean a flashing round globe, I have never seen such a figure. Flashing question marks or flashing circle with a slash through it means the mac cannot find a bootable hard drive. Your hard drive may have died or become corrupted. To see if you hard drive is defective, again run Disk Utility by booting off an install CD or another hard drive with a compatible MacOSX operating system to diagnose.
Try running the repair disk program under the general tab of the Disk Utility program.

Aug 11, 2014 | Apple MacBook 13"White /2.0Ghz Intel Core2...

1 Answer

Windows XP sp3 not booting Error system halted


Is your First Boot Device in BIOS is Set to Hard Drive? IF not then Just Change it Hard Drive.

Aug 11, 2012 | Intel Computers & Internet

1 Answer

Troubleshoot D530 Pentium 4, i get the boot screen, over n over


Run hard drive tests, if HD tests good, and no data to keep, restore os from restore partition with f10. If data needs kept, run a repair installation of os. Run fixboot and fixmbr commands from prompt. Also try sfc/scannow from command prompt.

Nov 21, 2009 | HP Compaq d530 CMT Intel Desktop PC -...

1 Answer

P4M800PRO-M v2.0 using a Pentium 4 want to replace with Core 2 D


I would say you need to upgrade the BIOS, get all the latest drivers for the Mother Board.

Jun 24, 2009 | EliteGroup P4M800PRO-M Motherboard

1 Answer

My system doesnt boot from the PATA drive


Sort of obvious (judging by the stuff you tried) but, Did you try going into the BIOS setup and making sure the hard disk is the first boot device? (if its lower than something else, say a windows hard disk, it'll load windows instead, etc.) If not something is wrong with your linux boot file, and the BIOS can't read/understand it, try reloading linux onto the hard disk.

Feb 28, 2009 | ASUS K8V-MX Motherboard

1 Answer

Boot pc problem


You can solve this by going into the bios setup & changing the boot order. Make the dvd/cd drive 1st in boot line then hdd. This should allow you to boot up from the windows xp disc. Hope this helps & please rate this solution fixya. Thanks.

Feb 04, 2009 | HP Compaq EVO D510 Intel Desktop PC -...

1 Answer

Sysem will not remoot fast and properly


It sounds like you are having a hard drive failure.

The message your getting is not asking for the motherboard disk, it is asking for an operating system disk.

I don't understand how the computer ever get's to the Net if it can't get past asking for a system disk.

Please provide further information, such as operating system, how old the computer and hard drive are, and a more clear description of what the system is, or is not, doing.

Jan 20, 2009 | Intel PENTIUM-4 865GV CHIP MOTHER BOARD...

1 Answer

My computer won't boot but power supply is okay


checked the hard disk if it is detected, if it wont start up, try to reinstall the operating system..

May 27, 2008 | Intel (RK80532PG0881M) Pentium 4, 3 GHz...

1 Answer

Would a SCSI disk and a IDE disk work together?


This solution works on WIN98 and I don?t see a reason why it wont work on you If there is something that you were missing you might want to check with anther expert. This solution is a little complex so I hope ill be able to explain it well enough: 1. Make a boot disk so u can format and install windows. 2. Define the new HD as MASTER and hook it up to "primary IDE" 3. Disconnect the SCSI and pull the board out. 4. Reset the comp from the boot disk u made (HD is connected) 5. Get in "bios settings" and make sure that the new HD is defined as "primary drive" In the 1st IDE 6. Now, perform a FDisk on the new HD, define partitions, do a reset and format the HD Install the operating system you wish to have, make sure it works well. 7. install the SCSI board and its HD make anther reset. 8. now the comp is supposed to make boot and recognize the SCSI, it is possible that you will need to define your system configurations but for that, regretfully, I cannot guide you Although this is not necessarily have to happen. Good luck

Feb 23, 2006 | Cybertron Intel Pentium 4 2.66GHz Serial...

Not finding what you are looking for?
Biostar P4M800-M7A Motherboard Logo

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Biostar Computers & Internet Experts

Jayburt

Level 2 Expert

77 Answers

David
David

Level 3 Expert

778 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Biostar Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...