Question about American Standard 2770.018w.020 Cadet Whirlpool White

1 Answer

My American Standard whirlpool pump will only hum.

The pump will hum and get real hot but does not circulate any water. Wondering if that is the sign of a bad pump or something I can repair. I was planning on removing the pump to diagnose but cannot find the manual. The American Standard part number is 752538-300. Ultra Jet Part number is 10-10-007. UL model PUWWSCAS12598R. Date code is 11-06-04.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 31 Answers

The bearings (or bushings) of the pump or pump motor have siezed, these can be replaced on some models but for the most part you will need to replace the pump and/or pump motor. and as where to get parts, i would suggest the outlet from wich you purchased the unit or another appliance outlet. Or if you feel up to the challenge, im sure you could find replacement parts on the internet: google, ebay, etc.

Posted on Sep 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When I push the button on my american standard jacuzzi tub I hear the hum of the motor but jets don't come on


In my case I took the motor out and used a screw driver to turn the impeller in the front of the pump and the fins inthe back. Put it back together and it worked. I then used 2 tablesoons of dishwashing detergent and 1/2 cup bleach and ran it for 20 minutes to clean and degrease the impellers

Jun 30, 2012 | Jacuzzi Fuzion Whirlpool

1 Answer

Dishwasher fills with hot water then does nothing


Do you get any humming noise when you turn it ON?

How long its been you used the dishwasher last time...?

If you are getting an humming noise then Sounds like the water circulator pump is stuck. The motor tries to turn it (humming noise), but cannot. So a breaker trips (self reset). Not claiming this is actually the problem, but this is what the motor turns.

Aug 30, 2010 | Whirlpool 24 in. GU2500 XTP Built-in...

1 Answer

Whirlpool Pump - Hums, no water flow...


The impeller and/or motor shaft is stuck or seized. If accessible you can try rotating the motor shaft with a visegrip plier or similar tool to see if it will come lose. Otherwise you should consider having the pump taken out and overhauled. Often the shaft seal begins leaking and result in water damage to the motor bearings. Bearings can be replaced, but compare labor and parts for overhaul to simply replacing the whole pump.

Apr 06, 2010 | Pool & Spa

1 Answer

Water runs very slowly when trying to fill jet tub.


Check to see if there are any screen type filter to the tub as debris may be clogging it. Also air lock can occur but it should not be causing problems as 90% clear them selves.....

Feb 15, 2010 | American Standard AMERICAN STD Savona...

1 Answer

American Standard Motor humms


I think there is a clear or black tube connected to the pump on the back of the black box on top of the pump motor, there is a nut where the tube attaches to the back, unscrew this nut and pull the tube out. If it is not the tube type switch, the pump motor power plug should be plugged into a black or blue control box, this box should have a wire going to the switch in the tub. If you have a buzzing noise, the pump or motor is probably seized, This is caused from lack of use or using bath oils or soap in the tub, When you get the pump and motor out to check, stick a screwdriver in the back of the motor(center of motor hole may or may not have a plug in it) and turn the screw, itshould spin freely with little or no resistance.

May 08, 2009 | American Standard 2770.018W.021 Cadet 5' x...

1 Answer

Instructions for American Standard Safe-T-Heater #9075.120


Once the heater is installed and the whirlpool pump is operating, the heater is totally automatic. The heater will help maintain the temperature of the water in the bath. The heater is equipped with a preset pressure switch. The pump must be running with water flowing in the whirlpool to allow the heater to turn on. The Indicator Light light turns on whenever the heater is operating. The heater includes an exclusive "Intelligent High-Limit". This safety circuit will not "false trip" from hot tap water. It will only turn the heater off if the thermostat fails. If the high-limit trips frequently, call a service technician. To manually reset the circuit in the event that the "High-Limit" switch has been activated, simply (1) Turn off the whirlpool pump. (2) Drain water from the tub. (3) Remove power from heater by unplugging at receptacle or turning off circuit breaker. (4) The heater circuit will automatically reset in less than 15 minutes. (5) Restore power to the heater. (6) Whirlpool bath is now ready to use.
Good Luck,
Wayne
wayner29@aol.com

Mar 29, 2009 | American Standard Home

2 Answers

Whirlpool pump only buzzes.


Well there are two things....You say "buzzes?" Like pump is running "humming" & not pushing water. That would be an "airlock" in the pump & it needs to be primed.
If it's "buzzing" & pump motor is not turning (Like it's froze) you might have a bad start up capacitor on the pump that needs to be replaced. Worst case scenerio entire pump needs replacement.

Jan 13, 2009 | American Standard 2770.018w.020 Cadet...

1 Answer

Whirlpool DU8900 XT-5 the water comes in at beginning of cycle and the heater heats the water, but the machine does not go any further. it kinda' hums but no water gets pumped and moving. at end of cycle...


if you can hear a low humming noise when it should be pumping water round, then suspect the circulating pump.
fault can be motor capacitor - low cost part
or
pump seized - see if you can turn it by hand

Sep 15, 2008 | Whirlpool Dishwashers

Not finding what you are looking for?
American Standard 2770.018w.020 Cadet Whirlpool White Logo

1,579 people viewed this question

Ask a Question

Usually answered in minutes!

Top American Standard Home Experts

Donni Steen

Level 3 Expert

659 Answers

Mike

Level 3 Expert

4340 Answers

john h

Level 3 Expert

12650 Answers

Are you an American Standard Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...