Question about Toshiba Satellite A105 Notebook

1 Answer

I can't open "My Safe"

I swipe my finger, and it accepts my print. Then it says "Fingerprint Software Error: Cannot create My Safe view object.
My Safe cannot be unlocked because its data file is currently in use or just was used by some other application. Unlocking cannot proceed until the My Safe data file is closed and removed from the operating system's file cache. This is usually a temporary condition. Wait a few seconds and try again."

Usually, when there's problem (first time for thise error), I can restart, but it's not working this time.

Posted by on

  • 5 more comments 
  • twins1729 Sep 29, 2009

    I honestly don't remember it. Is there anyway to reset it?

  • twins1729 Sep 29, 2009

    Wait, it says how. O_O

  • twins1729 Sep 29, 2009

    Simple question: Where can I find the Protector Suite? It rings a bell, but I'm lost.

  • twins1729 Sep 29, 2009

    Simple question: Where can I find the Protector Suite? It rings a bell, but I'm lost.

  • twins1729 Sep 29, 2009

    Simple question: Where can I find the Protector Suite? It rings a bell, but I'm lost.

  • twins1729 Sep 29, 2009

    Sorry for triple-posting. Can't refresh. I found A protector suite, but would their be a specific one for my safe? I'll check this later. No hurry.

  • Art Ellison
    Art Ellison May 11, 2010

    Have you tried using your password instead of your fingerprint?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 61 Answers

Hi, did u try starting your system in safe mode?
If not, try starting your system in "Safe Mode", and try re-installing the finger print software.,
Make sure you have the setup file for the finger print reader before you uninstall it from the system

Posted on Sep 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fingerprint reader working but not showing image


From the description it is a software problem, If you were sticking things in the scanner bar that would not help and it will prevent the laptop from working.

Mar 30, 2012 | HP Compaq 6910p Notebook PC PC Notebook

1 Answer

My laptop has a fingerprint how do i change


Run the fingerprint software.
* Search the software for "change user/ or print"
(in order to change you need to print again the old before replacing it with the new one.)
*Swipe the old fingerprint and choose change new
* Swipe the new fingerprint data

tnx

Aug 18, 2011 | HP Computers & Internet

1 Answer

Can you solve the problem for my lap top Toshiba satellite E105-S1402, I am not able to register my finger print on TrueSuite Access Manager Finger Print. The error message come "failed to open the sensor"


You can try to download and install the Fingerprint Utility here and check if you will receive the same error message.

Refine Search by: Your Operating System (Vista by Default)
All Categories: Security
Title: Toshiba Fingerprint Utility for Windows Vista / XP
Download and Install

If the reinstallation of this software does not help then the issue must be related to a corrupt Windows Vista files and in my opinion the usage of the Toshiba recovery CD should helps.

Thanks for using Fixya

Jul 29, 2010 | Toshiba Computers & Internet

1 Answer

HAVEA TOSHIBA LAPTOP WITH A FINGERPRINT IDENTIFIER TO OPEN WINDOWS, WANT TO CHANGE THE FINGERPRINT TO MY DAUGHTERS. HOW DO WE ACCESS THIS?


dentifying the fingerprint readerA fingerprint reader provides extra security for the PC. The VeriSoft Access Manager by Bioscrypt uses the fingerprint reader to identify the user, and controls access to Windows or other secure systems. Instead of typing a User ID and password, you can move your finger across a sensor to logon or start commonly used applications. Verisoft Access Manager can manage all of your different secure accounts and the required user names and passwords by recognizing your fingerprint.On HP notebook PCs, the fingerprint reader is a small metallic sensor located near the keyboard or display. By swiping your finger perpendicular to the metallic sensor you can logon to the PC, a network, or open a program. c00897920.gifBefore you can use the fingerprint reader, you must set up the fingerprint reader by registering your fingerprint with the Access Manager. Set up the fingerprint reader To set up the fingerprint reader to recognize a user, the user must have a logon account on the PC and the account must have a password. Multiple users can be registered for the fingerprint reader if each has their own user account.
  1. In Windows, double-click the VeriSoft Access Manager icon c00897921.gif in the notification area of the taskbar to open the My Identity window. Alternately, click Start > All programs > Verisoft > My Identity .
  2. Click Log On to open the VeriSoft Logon Wizard. Click Next to begin.
  3. Enter the User's Windows password in the Password field on the Introduce Yourself page, and click Next . If you have successfully logged on to Windows, click Finish to close the wizard.
  4. Click Register Fingerprints on the My Identity window, to open the VeriSoft Logon Wizard. Click Next to begin. c00897922.gif
  5. Select a finger shown on the hand graphic, and then slowly swipe your finger across the sensor. One of the squares below the hand graphic will change color when the scan is accepted. A message displays if the scan is not accepted.
  6. Swipe the same finger across the sensor again until all four squares change color, then clickNext to register the finger print. If you need to start over during the fingerprint registration process, right-click the highlighted finger on the screen and then click Start Over .
  7. If prompted to register a second fingerprint, click a different finger on the hand graphic, and then repeat steps 5 and 6.
  8. After using the Registration Wizard to registered at least 2 fingers, click Finish .
  9. To set up the fingerprint reader for a different Windows user, log on to Windows as that user and then repeat steps 1 through 8.
After registering your fingerprint you can log off and then use your registered fingers to log on to Windows. Using Fingerprint reader before registeringIf you swipe your finger across the fingerprint reader before it is set up, the Access Manager opens a logon wizard window and prompts you for informa

Feb 03, 2010 | HP Pavilion DV5234US Notebook Laptop

1 Answer

How to setup finger print sensor


When you start a machine with a Fingerprint reader for the first time, you will see the following screen when you reach the Desktop. This is the main console for configuring and managing the Fingerprint reader.

Here you can enroll your fingerprint, and adjust your Power-on security settings.

When you click on “Create new passport and enroll fingerprints” you will be prompted for your logon password.

Once you enter your password you will see the main enrollment screen.

You can select a fingerprint to enroll either by selecting the fingertip with your mouse, or by choosing from the drop down list. To enroll, either double-click the fingertip you wish to use, or press the Enroll button

On the left is an animated finger that demonstrates how to swipe. You must swipe your finger three times to enroll.

If your finger is not centered, you will be prompted to move it to the right or to the left. If it’s not able to read at all you will be prompted to try again.

When you swipe successfully, you will see the highlighted portion go to No. 2 for the finger printer to be swiped again.

Once you have swiped three times successfully, the three images merge into one and you are brought back to the main enrollment screen, where the enrolled finger is shown with a red dot.

  • You can enroll multiple fingers.
  • The Enroll button has changed to say Delete. This allows you to delete a fingerprint you have already enrolled. If you used the mouse to click on a fingertip that was not already enrolled, the button would change back to Enroll.
When you click Next you are brought to the Power-on Security screen.

This is also the second choice from the main Fingerprints enrollment screen. Here you can use a fingerprint to replace your Power-on passwords if you are using them.

If you are using Power-on passwords, then select the box at the top. When you click on the Add button, you will be shown a list of the fingers that you have enrolled, and can select which one(s) you want to enable to replace your Power-on passwords.
Once you select a choice from the box, the finger will show up in the list. The first time you restart your machine after this, you may be asked to swipe your fingerprint as well as enter any Power-on passwords you have set. After that you should only be asked for your fingerprint.

  • Predesktop Authentication
    • In addition to the process above, there is a setting in BIOS that must be enabled for a user to be prompted for their fingerprint instead of a Power-on password. The Default for this Setting is “Enabled”, so no change should be necessary. It is in the Security Section under Fingerprint. The setting is called “Predesktop Authentication” Again, the default is “Enabled”. If disabled, a user will not be able to use their fingerprint on Power-on.
  • Security Mode
    • This controls what password will allow a user access to the system if they are not able to gain access using their fingerprint. The default setting is “Normal”. This will allow the use of either a user Power on password, or a Supervisor password instead of a fingerprint.

      The alternative setting is High. This will allow only a Supervisor password to be entered instead of a fingerprint to gain access to the system.
Once you click Finish, you will be brought back to the main Fingerprints screen.

The Create new Passport and enroll fingerprints choice has gone. Replacing it are two new choices:
  • Edit passport and fingerprints
  • Delete passport and fingerprints.
If you choose Edit passport and fingerprints you will be prompted to swipe your finger to confirm your identity

You will then see the password screen. Click next to go to the main enrollment screen.

This is the same screen that appears when you have successfully enrolled a fingerprint.

Here again you can delete or enroll fingerprints

I trust this was helpful and thank you for contacting the experts.

Jan 18, 2010 | Lenovo ThinkPad X300 Notebook

1 Answer

When I scaned my finger it said Too Short and will not open


Well first of all, get ***********'s finger to scan. The system probably locked you out because it doesn't recognize your fingerprint.
And if you have scanned your fingerprint as a key PRIOR to this situation then wait for your computer to load then calmly swipe your finger again.

Jul 04, 2009 | Toshiba Satellite A215-S4747 Notebook

1 Answer

My fingerprint reader wont recognise my fingerprint. "bad read" o


Check with a service person if the finger print reader is still functional

Jun 24, 2009 | Toshiba Satellite A100-S8111TD Notebook

1 Answer

I have dv9000 notebook computer. how to config there finger print password


1. In Windows, double-click the VeriSoft Access Manager icon in the notification area of the taskbar.
2. On the “My Identity” page, click Log On, located in the upper-left corner of the page.
The VeriSoft Access Manager Logon Wizard opens.
3. On the “Introduce Yourself” page, enter the user's Windows password, if one has been established,
and then click Next.
4. On the “Services and Applications” page, click I want to, and then click Register Fingerprints.
NOTE: By default, VeriSoft Access Manager requires registration of at least 2 different
fingers.
5. When the VeriSoft Access Manager Registration Wizard opens, click Next, and then slowly swipe
your finger across the sensor.
NOTE: The right index finger is the default finger for enrolling the first fingerprint. You can
change the default by clicking the finger you want to register first, on either the left hand or
the right hand. When you click a finger, it will be outlined to show it has been selected.
6. Continue swiping the same finger over the fingerprint sensor until the finger on the screen turns
green.
NOTE: The progress indicator advances after each finger swipe. Multiple swipes are
necessary to register a fingerprint.
NOTE: If you need to start over during the fingerprint registration process, right-click the
highlighted finger on the screen and then click Start Over.
7. Click a different finger on the screen to register, and then repeat steps 5 and 6.
NOTE: If you click Finish before registering at least 2 fingers, an error message is
displayed. Click OK to continue.
8. After you have registered at least 2 fingers, click Finish.
9. To set up the fingerprint reader for a different Windows user, log on to Windows as that user and
then repeat steps 1 through 8.

Feb 02, 2009 | HP Pavilion dv9000z Notebook

1 Answer

Injuries and Fingerprint Sensor


fingerprint identification is the new vogue for forgetful people
there will still be a area where you put in a password or pin number to get in that is if you can remember that code
anyway the sensor reads the finger print the same as in the police department and things like scars cuts etc do not alter the over all comparison or your original print to what the new print looks like

Jun 12, 2017 | Micro Solutions Fingerprint (501003) 200...

Not finding what you are looking for?
Toshiba Satellite A105 Notebook Logo

780 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18409 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...