Question about Kodak EASYSHARE 5500 All-In-One InkJet Printer

Open Question

FATAL PRINTER ERROR CODE 3813

Pictures are printing terribly. Replaced the color cartridge hoping that would solve the problem. Now have a FATAL PRINTER ERROR CODE 3813.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 45 Answers

SOURCE: Color prints look faded

You need another printhead.

Posted on Feb 17, 2009

  • 20 Answers

SOURCE: kodak esp 3 printer not printing properly.

you need to clean the printhead

Calibrate the printer (Scan + Cancel)At the same time for 5 seconds

Do a demo page ( Scan + Copy )

And go to the website :

www.kodak.com/go/esp3downloads

And download the latest version of the firmware

your all set after

Visit also the website

www.kodak.com/go/itg

for the troubeshooting guide

Posted on Mar 25, 2009

deepfunktion
  • 18 Answers

SOURCE: My printer won't print black ink even though the cartridge is full

try to clean the nossles with software from the manafactures website

Posted on May 06, 2009

  • 119 Answers

SOURCE: Kodak printer won't print

Check out the following link:
http://www.kodak.com/go/itg

For any image quality issues, you will be led through a few troubleshooting steps and if they don't work, you will be given some direction on how to get a replacement printhead.

Posted on Jul 11, 2009

shockwave727
  • 262 Answers

SOURCE: Kodak 5100 Needs Both Cartridges To Print?

Unfortunately, you cannot used the printer if one of the ink cartridge is empty., compare to the other printers you can print a black text or gray scale if the color is empty or one of the cartridge is empty.

All kodak printers work the same both cartridges should have ink on ink before you can use It.

Posted on Nov 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fatal Error code 10H


C 0010H - Color PC drum malfunction.Check the motor for proper drive coupling and correct as necessary.Check the motor connector and the electrical board connectors and the mechanical transport drive components(gears,couple).

Apr 05, 2013 | Konica Minolta Magicolor 2530 DL Laser...

1 Answer

Our HP Color LaserJet printer has a 10.10000 error


10.000x Supply error E-label cannot be read or print cartridge is
not properly installed.

10.0001 = Cyan print cartridge

try this:
1 Reinstall print cartridge.
2 Turn on the printer.
3 If the problem is not solved, replace the cartridge.

Nov 03, 2010 | HP Color LaserJet 2600n Printer

1 Answer

Printer will not print from computer


Question : How do I resolve the error code 3813 "Firmware assert" (all-in-one printer)?
Answer : To resolve the error condition:

  1. Disconnect the power adapter from the printer.
  2. Wait 30 seconds to allow the printer to reset.
  3. Connect the power adapter to the printer. Turn the printer on if necessary.
  4. Wait until the printer is ready to use.
If the error condition continues, contact Kodak.

See also here and here.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Aug 31, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

ERROR CODE 3813


After I took out PrintHead and tried to clean it up again, I put it back in with Ink Cartridges and got error code 3813 - also couldn't fix it. Removed Ink Cartridges, turned printer off. Turn back on and it will forget about error code 3813 and will tell you to install Ink cartridges. Do that and error code 3813 is gone and ready to print.

A note: I did not find anything telling me I have to change printhead but my problem with black ink printing still exists so I will get new printhead and see if that problem gets fixed.

Sep 10, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Will not turn off, will not print text, poor quality pictures


well..this is not a happy circumstance. I must report that when the paper is pulled through from the front, it can damage some innards, which I suspect is the case here.

sounds like it's a candidate for a factory service gig.


Aug 19, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

3 Answers

Printer won't print


My printer will not print black ink. The color ink is very light. I replaced a new color cartlidge, cleaned the printheads and tried to callibrate, but the printer could not identify the callibration page from my scanner. Can you help me resolve my problem?
Thanks,
Carol

May 09, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

OKI C5500 Fatal Error 177


From OKI error log:

Lower heater temp state - Low
backup roller thermistor indicates low temp
seek service if turning off/on printer does not solve problem

Apr 15, 2008 | OKI C5500n Printer

4 Answers

Fatal error 163


Fatal Error 161-Toner Sensor Error, Color:Magenta
When magenta toner sensor error has occurred

Fatal Error 163-Toner Sensor Error, Color:Black
When magenta toner sensor error has occurred

Both are Sensor errors....You would first check the lock levers that hold the toner cartridges in, if everything is fine with them then you could possible have toner dust on the sensors. First take out the cartridge that you are having problems with, then use a dust off can and carefully clean out any axcess toner that you can see where the toner sits. there is a sensor that looks like a clear plastic or glass eye that reads the cartridges and it sometimes gets dirty.

Jan 11, 2008 | OKI C5200n Laser Printer

Not finding what you are looking for?
Kodak EASYSHARE 5500 All-In-One InkJet Printer Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Cindy Wells

Level 3 Expert

5056 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...