Question about Logitech Webcam

1 Answer

MICROPHONE NOT WORKING EVENTHOUGH IT IS INSTALLED

I INSTALLED LOGITECH qUICKCAM e3100 ONTO MY LAPTOP. i HAVE WINDOWS VISTA. Everything is working except my microphone. I have checked everything i.e control panel and everything is supposed to be working.It is not muted.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,658 Answers

If you have a webcam with a built in mic you need to make it your 'default' (The one you want to use)

Set up Audio

Laptop x webcam/mic x Vista x Yahoo Messenger

TEST SPEAKERS
Right click on speaker icon in System Tray
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
Set required mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click OK
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

CONFIGURE TO MESSENGER

Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

Click ( > ) Messenger > Preferences > Calling and Audio
Set mic and speakers to show Default equipment
Run call up assistant to test audio equipment > Apply > OK

Posted on Sep 29, 2009

Testimonial: "Returned original web cam, I think it was faulty. Bought, Logitech QuickCamDeluxe for Notebooks and followed your advice, it works. Thanks your a star"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to use skype 6.0 with logitech c-310


Launch the Logitech QuickCam or Webcam software on your computer. Verify that you see yourself Logitech Webcam software window. Close the software window. Sign in to Skype. Click the "Tools" menu and select "Options." Click "Video Settings," check the "Enable Skype Video" and "Start my video automatically when I am in a call" boxes. Select your Logitech QuickCam from the drop-down list. Your webcam should display video in the window. Click "Audio Settings" if your QuickCam has a built-in microphone and select it from the microphone drop-down list. Check the "Let Skype adjust my audio settings" box in "Audio Settings" so Skype recognizes your microphone. Click "Save" to save the options for your audio and video settings. Skype will close the options menu.

Jan 19, 2013 | Logitech C310 Web Cam, Skype, Computer...

2 Answers

I have just purchased Logitech QuickCam E3100 - is there a microphone in this or do I need to purchase a seperate microphone or replace for a combined Web Cam and microphone?


Get a separate microphone, do not get a combo. This way you can position your camera at an ideal position and your mic as a perfect position to pick up your voice. combo units are nice because its one less thing but you will be unhappy with the results

Oct 04, 2009 | Logitech Webcam

1 Answer

Problem with the microphone ?


Hello

One usefull thing look out for is the os the webcam is made for. I hade the same problem with a wireless dongle. It worked propperly but after a few munites it crashes. I eventually found out that it was a driver incompatibillity os eventhough the driver was for my spesific os i am using. So have a look a the os the cam is made for. You are using vista, and eventhough there might be drivers for vista,they do not always work perfectly. My solution would be to to check for the lates updated drivers for the webcam and try installing them and have a look if it works, it worked with me.

Please rate this suggestion

Best Regards

Sep 25, 2009 | Logitech QuickCam® Deluxe Web Cam for...

1 Answer

QuickCam mic doesn't work


I read another post that said to go to Logitech itself for up-dates. This I did......downloaded all new drivers, etc. (the disc that comes with the cam must be out of date !). Then when that was done, I went back on Skype and where you do a 'voice test' I was able to this time around to "choose" my webcam - this was not coming up before at all. So in doing that it activated the mic on the webcam and all was OK. We seniors are supposed to be savvy with the forever changing world of electronic devices today! (LOL)

Feb 12, 2009 | Logitech QuickCam Messenger Web Camera

2 Answers

Logitech quickcam


I had this problem on my laptop when I first got my quickcam. Go to the quickcam menu (should be a slim vertical bar). Click on the "gears" and then the microphone. At the top, it should offer a choice of microphones (maybe it says "quickcam" or "logitech" and "realtek"). You need to choose the "logitech" or "quickcam" option.

This fixed it for me, but it often switches back to the other one, so I frequently have to do this again...and sometimes restart everything once I do it.

Hope that works for you.
-Danimalist

Oct 09, 2008 | Logitech Quickcam Chat Webcam

4 Answers

Logitech quick cam communicate stx on Vista - microphone not working


Why isn't the microphone on my camera working?
trnsp.gif Answer The microphone may not work because of a hardware or configuration problem. To determine if it's a hardware problem, test the microphone in Sound Recorder.

  1. Click "Start," > "Programs" ("All Programs" for Windows XP) > "Accessories" > "Entertainment" > "Sound Recorder."
  2. Click the Record button and speak into the microphone of the camera. You should see the green line move, indicating the application is picking up sound.
  3. Click the Stop button.
  4. Click the Play button. If there is no sound at playback, check to make sure the correct device is selected.
    1. Click "Edit," then "Audio Properties."
    2. Make sure Logitech is listed as the Preferred device for "Sound recording."
The microphone may also be defective. To test this, try the camera on another USB enabled system.
If you can record sound in Sound Recorder, but not in the QuickCam application, try setting the Logitech Microphone as the Preferred device in Audio Properties.

This article covers how to configure a Logitech camera's audio and video settings to work with Skype 3.6 or above. trnsp.gif Answer This article applies to the following cameras:
QuickCam Orbit AF
QuickCam Pro for Notebooks
QuickCam Pro 9000
This article applies to the following platforms:
Windows Vista
Windows XP
This article applies to the following 3rd party application:
Skype™ 3.6 or above

To set up Skype for video please be sure that your Logitech webcam is connected and working. This can be verifed by launching your QuickCam software and checking for a video stream withinin the QuickCapture video window. Once the webcam functionality is verified, please close the QuickCam application and follow the steps below.
  1. Launch Skype™ and click on "Tools" as shown in the figure below
    16439.jpg
    Fig 1
  2. When you click on "Tools" you will see a drop down list
    16440.jpg
    Fig 2
  3. Click on "Options" at the bottom of the drop-down list
    16441.jpg
    Fig 3
  4. A new screen appears. Click on the left side of the pane under "Video Settings"
    16442.jpg
    Fig 4
  5. Under the "Select webcam" drop down, please choose your Logitech camera, then click the "Save" button.
    16443.jpg
    Fig 5
  6. Click on "Tools" as shown in Fig 6 to get your Logitech Audio setup.
    16444.jpg
    Fig 6
  7. When you click on "Tools" you will see a drop down list
    16445.jpg
    Fig 7
  8. At the very bottom of the drop down list, please click on "Options"
    16446.jpg
    Fig 8
  9. When you click on "Options" you will see a new screen
    16447.jpg
    Fig 9
  10. On this new screen click on the left side of the pane under "Audio Settings"
    16448.jpg
    Fig 10
  11. You will now have the option to select your Logitech camera's Microphone as your main Audio source. Under the "Microphone" drop down, select the Logitech Microphone, and click "Save"
    16449.jpg
    Fig 11
  12. You should now be ready to use your Logitech webcam and microphone in a Skype video call.

Mar 25, 2008 | Logitech QuickCam Communicate STX Personal...

1 Answer

Haveing trouble installing logitech quick cam onto my comuptor thats running windows vista


This problem was caused by a compatibility issue between Windows Vista and Logitech QuickCam Messenger.
Logitech QuickCam Messenger was created by Logitech, Inc..
Recommendation
—————-
To search for similar devices that are compatible with this version of Windows, visit the Windows Vista Hardware Compatibility List website online.
However, it’s not totally out of hope for owner of Logitech QuickCam Messenger who has upgraded to Windows Vista. The following hack will use Windows XP driver (a common trick to use non Vista compliant device) to install the webcam in Vista:
  1. Download QuickCam 8.4.8 with driver for WinXP.
  2. Install WinRAR if not already installed yet.
  3. Open the setup installer qc848enu.exe and unpack its contents to a folder. Alternatively, right click on qc848enu.exe and select “Extract to qc848enu\” option.
  4. Insert or plug in the Logitech QuickCam Messenger to a USB port if not already done so.
  5. An “Driver Software Installation” icon in systray (notification area) should appear, which will pop up detailed message if click. It should fail, and “Add Hardware Wizard” dialog window will appear. Choose to install the driver manually by instructing the Wizard to locate and look for the web cam driver inside the Drivers folder under the unpacked folder of the qc848enu.exe setup program. You can use browser button to select the folder.
  6. Windows Vista should grab the XP driver and install it properly.
  7. Download the latest version (10.5.1) of Vista compliant QuickCam software from Logitech to install the software on Vista.
  8. Run the setup (qc1051enu) normally. You may need to skip the detection of webcam near the end of installation process.
Voila, you can now use the Logitech webcam to capture images or use it in conjunction with video chat in IM programs such as Windows Live (MSN) Messenger, AIM Messenger, Yahoo! Messenger, Skype or run Logitech VideoCall.

i hope thist post can solve your problem


thank's


cropp

Mar 14, 2008 | Logitech Webcam

2 Answers

Logitech QuickCam Express: Microphone not working


If you have windows messenger follow below

Windows XP
Windows Messenger is a native Instant Messenger application to Windows XP. This application can be used to set the output device of your choice. In turn, this information will carry over to the MSN Messenger 7.5 application settings.
Launch Windows Messenger and execute the audio tuning wizard.
  1. Go to “Start”.
    Select “Run”.
    Type “msmsgs” and click “OK”.

    9952.jpg
  2. In theWindows Messenger, click “Tools” and select “Audio Tuning Wizard”.

    9953.jpg

  3. Follow the steps which are provided by the “Audio Tuning Wizard” and select your desired Microphone & Speaker device.

    9954.jpg

  4. Once this process is complete, close the Windows Messenger application.
    The configuration change made through Windows Messenger should now be set in the MSN Messenger 7.5 application.

Mar 08, 2008 | Logitech QuickCam Express Web Camera

2 Answers

I've bought a logitech quickcam communicate STX. When I installed it first it worked fine. Someone unpluged it from the usb port and it wouldn't work. I re-installed the drivers and it was fine again but...


The microphone may not work because of a hardware or configuration problem. To determine if it's a hardware problem, test the microphone in Sound Recorder.

  1. Click "Start," > "Programs" ("All Programs" for Windows XP) > "Accessories" > "Entertainment" > "Sound Recorder."
  2. Click the Record button and speak into the microphone of the camera. You should see the green line move, indicating the application is picking up sound.
  3. Click the Stop button.
  4. Click the Play button. If there is no sound at playback, check to make sure the correct device is selected.
    1. Click "Edit," then "Audio Properties."
    2. Make sure Logitech is listed as the Preferred device for "Sound recording."
The microphone may also be defective. To test this, try the camera on another USB enabled system.
If you can record sound in Sound Recorder, but not in the QuickCam application, try setting the Logitech Microphone as the Preferred device in Audio Properties.

Feb 25, 2008 | Logitech Webcam

7 Answers

QuickCam mic doesn't work


For XP users,try:
>Start
>ControlPanel
>Sounds and Audio Devices
>Audio
>Sound Playback
Click on drop down menu arrow.
If there are two audio devices listed: Deselect current device; select second device.
>OK

Oct 05, 2007 | Logitech QuickCam Express Web Camera

Not finding what you are looking for?
Logitech Webcam Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2658 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...