Question about Creative Labs ZEN Vision:M Digital Media Player

1 Answer

When change the battery what if the battery socket comes off? what can i do?

Posted by on

  • 1 more comment 
  • a4you Sep 30, 2009

    when change the battery what if the battery socket comes off? what can i do?

  • a4you Sep 30, 2009

    when change the battery what if the battery socket comes off? what can i do?

  • msdoll2 May 11, 2010

    It will need to be re-solder back on. I found someone on ebay that fixing the and he does a good job. Here is
    is web page addresshttp://firehouse7777.weebly.com/. I hope this helps

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

If the tiny little pins are still there it will to be need to re-solder. And if are not good at re-solder you need to have someone do it. I found the web page of some who does repairs on the vision m. http://firehouse7777.weebly.com/. I hope this helps

Posted on Oct 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Dremel charger model 856 won't charge. Charging light will not come on.


I had a similar problem. I was going to take the charger apart but I ran into triangular socket head screws so in desperation I gently bent the 5 contact wires out from the battery socket. After slipping in the battery and plugging the charger into the wall socket, the charging light returned. The charger contacts that come into contact with the battery are easily pushed back and after a few battery insertions fail to make contact with the battery.

Feb 10, 2013 | Dremel 10.8V Lithium-Ion Cordless Rotary...

1 Answer

I need to change out my battery on my 2009 harley davidson softail deluxe


The battery is under the seat. The seat was held on by a large socket head bolt on either side of the seat on the earlier model Softails. Once you get the seat off, you'll see how the battery comes out. Disconnect the negative cable first and reconnect the negative last when you replace the battery.

Good Luck
steve

Jul 05, 2011 | Harley Davidson FLSTN- FLSTNI Softail...

1 Answer

Garmin says low battery and now will not work in the car. Does this Garmin have a battery inside the unit that I have to replace?


There is a battery in the satnav but it's not user replaceable. It can only be replaced by returning it to Garmin. Before sending it away to replace the battery you could check the following;

  • Have you the satnav connected to the charger?
  • If it's connected to the charger is the cigarette lighter socket working. You can check by plugging in another device to see if it works
  • If the cigarette lighter socket is working and the battery of the satnav is not charging it's possible that the fuse in the plug, that goes into the cigarette lighter socket, is blown.
To change the fuse;
Unscrew the ring that's at the end of the plug and the plug comes apart. Be careful not to lose the silver coloured tip. When the plug comes apart you can take out the fuse and get a replacement at any car accessory shop or a shop that sells garmin satnavs.

If you have to return your satnav to garmin you can find their contact details at http://www.garmin.com/garmin/cms/home/support/supportcontact

May 23, 2011 | Garmin nuvi 255W GPS Receiver

1 Answer

How do i change out the battery on my 2007 denali. what is keeping it locked into position


there is usually a small bolt that holds it in place with a rubber block the rubs along the bottom of the battery. Take a flash light and look for the small bolt at the base of the battery,,You need like a 1/4" drive socket with a 6-9" extention on the socket to reach it..Just unscrew the bolt and the bolt and the block will come loose,you just lift it up and out of the way. Remove old battery and reinstall new one in reverse order.

May 21, 2011 | 2007 GMC Yukon XL Denali

1 Answer

Trying to change battery in 2005 pontiac montana. battery won't come out and can't see any bolts underneath to take out. not sure what else to do from here.


THERE IS A BOLT DOWN ON THE LONG OF THE BATTERY YOU NEED A 13 MM SOCKET TO TAKE IT OUT ITS FOR THE BATTERY HOLD DOWN BRACKET ITS JUST A SQUAREISH PLASTIC BLOCK

Oct 16, 2010 | 2005 Pontiac Montana

1 Answer

2003 Impala: HOW DO I CHANGE BATTERY 2005 CHEVROLET IMPALA...


The battery is under the hood, just behind the passenger headlight.
There is a black bar that crosses over the battery and goes back towards strut tower. Remove this bar and the three bolts; probably a 12 or 13mm socket.
Remove the negative (black) battery cable with an 8mm socket or wrench. A 5/16" should work also.
Then remove the positive (red) cable with same socket.
Remove the battery clamp and bolt. Probably a 12mm socket with extension.
It's tight, but the battery can be removed.
Reverse instructions for installing the battery. (That includes hooking up the red battery cable first, then the black cable.)

May 16, 2010 | 2003 Chevrolet Impala

1 Answer

My acer laptop 5315 cannot boot, I changed the battery, still cannot boot, there is no current coming on the laptop itself. I used the plugged it to the D.C, still cannot come on. What do you think is...


either the charging socket is faulty or the charging circuit. You will need to have it looked at. A new socket is cheap but if it's not that the laptop might be a write-off. (if so sell it for spares on ebay)

Jan 27, 2010 | Acer Aspire 5315 Notebook

2 Answers

How do I change the battery on the motherboard of Toshiba 4600?


BSOD's (Blue Screen of Death) on the 4600 series almost exclusively come from bad memory sockets (you have two), while the RTC issue (date/time) is un-related. Only in extreme rare cases have I seen both memory sockets go bad - so you can probably get around one bad socket by using only the "other" socket. The memory compartment is at the bottom, square big door covering it held in by 2 screws.

The RTC battery (CMOS battery) requires separation of the lower case, as it's located between the main battery and the palmrest. To get to it:
1. remove all bottom screws labelled B16 and B6 (including ones within the battery compartment);
2. remove the 2 screws in the back of the laptop;
3. remove the keyboard cover strip above the keyboard;
4. remove the 2 screws holding the keyboard, disconnect and remove keyboard;
5. remove the 3 (B16) long screws on the left half, and the 2 short screws behind the CD-ROM drive.
6. disconnect video cable, floppy cable, and mouse cables, and wireless antennas.
7. now you can separate the lower case from the upper case/screen assy. You'll see the RTC (cmos) battery - it should be dressed in green with two wires (red/blk) connecting it to the motherboard.

That's should be it. I'm citing all this by heart, so forgive me if I miss a screw here or there.... :-)

Oct 15, 2009 | Toshiba Satellite Pro 4600 Notebook

1 Answer

Twice in a week my security light has come on and


disconnect the +battery post with an 8mm socket and leave the thing off for 2 minutes.reconnect it.

Jul 22, 2009 | Chevrolet Monte Carlo Cars & Trucks

Not finding what you are looking for?
Creative Labs ZEN Vision:M Digital Media Player Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs Audio Players & Recorders Experts

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

619 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a Creative Labs Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...