Question about E-Machines T5048 (7136) PC Desktop

2 Answers

My monitor doesnt work anymore on this computer for some reason. I used it for a while before. and i can still use this monitor on different computers. the light on the front isnt turning on

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 69 Answers

That means your computer has a non-working grapics card. so i recommend you get a new graphics card for this computer because e-machines are very good computers. hope this helped!!!!!!!!!!

Posted on Sep 30, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 743 Answers

Make sure that it is plug in 1st then go into device management and go down to monitor and hit the + in front of it and see if there is a yellow box of any kind...if there is the computer isn't acknowedging it. The next step you may need to be on line if this point right click on the application that you have under monitor and you will see a driver on that while on line if you have a driver's disk...that is better yet...reinstall it. Hope that helps

Posted on Sep 29, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i stop my monitor from going into sleep mode

A couple of possibilities here. Try using a different cable first to rule out the cable being the problem.

If that doesnt work, try using a different monitor if available.
If that fixed the problem then its your monitor.
If it didnt, then its your computer.

let me know what you find.

Sep 26, 2014 | ASUS Computers & Internet

1 Answer

My tv wont read that my computer is plugged in anymore(through hdmi) It turns on fine and everything and used to read my computer through hdmi fine but now it doesnt read it at all. It had this problem...

first i would look at the computer because they have toggles on and off for the monitor to be connected also, it may not be your tv, if this is ok then have you tried VGA to see if connects this way?

Dec 15, 2010 | ViewSonic N2230w 22 in. LCD TV

1 Answer

Whle playing my xbox i was in a party with a friend i was talking to him just fine and ev erything was going well, but all of a sunden for some reason i was able to talk to him anymore, i was able to here...

if both your output and input is working, then it MAY be your controller. Attempt to use a different controller. if this doesnt work, try to turn off the XBox, with the controller and TB HS unplugged. Plug in the controller without the TBHS, then plug in the headset. this gives the XBox step by step recognition, and attempt to send someone a voice message.

If this works, your controller is broken from the headphone jack. If it doesnt work, your Xbox might have a problem, id suggest contacting microsoft

Aug 06, 2010 | Voyetra Turtle Beach Turtle Beach Ear...

1 Answer

My lcd monitor is always at stand by mode, starting last night it usually happens , but last night it can't be used anymore, any suggestion on how to diagnose if its busted, or it can be fixed or repaired

Try the monitor on a different computer. If it works, then you are having a computer problem. Usual computer problem that causes monitor to not come out of standby is a hardware issue.

If the monitor does not work on another computer, then it is broke. If you are not good with circuit boards, I suggest taking it to your local electronic repair shop for a quote on repair. Personally if it was me, I would just get a new monitor if it fails to start up on a different computer.

May 15, 2010 | Samsung SyncMaster 740N 17" LCD Monitor

1 Answer

Display appears only after several hours of waiting

try plugging your monitor into another computer, if it works, plug your computer into a different monitor......if it works its a compatibility issue....if the new monitor doesnt work then its your video card, and if your monitor doesnt work on another system them you have a failure within the vga (or which ever you use) adapter itself on the monitor.


Mar 28, 2010 | Samsung SyncMaster 540N 15" LCD Monitor

1 Answer

Problems uploading photos to pc

Time to start using a card reader instead of your camera.

Mar 08, 2010 | Canon PowerShot SX110 IS Digital Camera

1 Answer

The Digital wire on the moniter for Samsung Syncmaster 2253 LW is not working anymore. Right now i have to use the old style moniter plugs.

If the old style connector (VGA) is working, you can use that. For single monitors under 24" wide, the difference is not noticeable.

Mar 04, 2010 | Samsung SyncMaster 2253LW Monitor

1 Answer

Usb cord connected to camera=not working

try using a different computer or a different card into the camera.

Aug 21, 2009 | Panasonic Lumix DMC-LZ7 Digital Camera

1 Answer

When I turn the computer on I have to press the button on and off several times before the monitor will come on

first try using a different connector.......or a different monitor and see if u have the same problem with it...............if it gives you the same problem u can try downloading the monitor driver to a cd (when u can get it to come on).....then re install the driver............ if this doesnt work it may be a faulty monitor card in the back of your computer that needs to be replaced.

Apr 08, 2009 | eMachines E19T5W 19" Monitor

1 Answer

Monitor not showing contents anymore.

Try to toggle the monitor screen, hold down the function key and hit the F8 key(usually). Wait a few seconds and try again if it doesnt work.

Dec 18, 2007 | Dell UltraSharp 1704FPT 17" Flat Panel LCD...

Not finding what you are looking for?
E-Machines T5048 (7136) PC Desktop Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides