Question about Sylvania SMPK4066 MP3 Player

2 Answers

Same stuck on waiting,pressed the reset button,nothing works that i can figure out.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Make sure you have fully charged the battery, units will not progress with low batteries they will hang.

Posted on Dec 16, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 835 Answers

Have you tried removing the battery from your cell phone.. Blowing off the battery making sure that their isnt any thing on it. Such as dust, animal or human hair, or lint between the area where the battery and your cell phone connect.? Try that first.

Posted on Sep 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

KDC-X997 Firmware update


If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Firmware (Software) update procedure of many popular brand TVs and other devices are given in detail.

Jun 09, 2016 | Kenwood KDC-X997 eXcelon Car Stereo with...

1 Answer

My motorola cliq2 is stuck keeps flashing motoblur screen


Has this phone been rooted or has the software altered? you can try this, but will reset to factory settings (will delete phone data):

  1. Power off the phone, press and hold camera button, press power button.
  2. Release the camera button when prompted (following the Batwings boot screen).
  3. Press the volume down button and wait for the "triangle !" screen.
  4. Open keyboard and press Alt L keys, then press Alt W keys.
  5. Wait for device to reboot
  6. After Factory Reset, Select "Register New Blur Account" during the setup process.
If this doesn't work then the phone will require further service/repair.

Jun 21, 2014 | Motorola Mobility CLIQ Cell Phone

1 Answer

How to do a factory reset on an hkc p886a tablet


Press and hold the power button and the volume up button till the screen turns off, wait a few seconds and if it doesn't start again press the power button, wait while it initializes.

https://www.youtube.com/watch?v=x6u2qWWeaEM

Mar 12, 2014 | Tablets & eReaders

6 Answers

Tmax 9 tablet stuck on boot screen


  1. Shut off tablet
  2. press the volume minus button and the power button @ start up
  3. tmax logo shows up and then a android menu
  4. factory reset
  5. Once complete, reboot
  6. wait 4-5minute... tablet works again

Dec 26, 2013 | Tablets & eReaders

2 Answers

I HAVE A PANDIGITALSTAR ANDROID TABLET WHEN I TURN IT ON IT STAYS ON THE WHITE SCREEN AND SAYS PANDIGITAL WITH THE BLUE DESIGN BUT I HAVE NO ICONS AND WHEN I PRESS THE BUTTONS AT THE BOTTOM NOTHING HAPPENS...


had same problem. I figured it out. While pressing the home key on the bottom of the tablet, press the on/off button until a black screen appears with green words on the side, which says upgrading...please wait...wait. It should take you to the Pandigital screen with a small bar underneath it with green going across. It should work.

Dec 15, 2011 | PANDIGITAL Digital Book 843967071153...

1 Answer

I am trying to program my new keyless remote for my 2007 Tahoe. I am to press vehicle info button until 'PRESS TO RELEARN REMOTE KEY' is displayed. This works. Next step is not working, and I...


When you are pressing the set/reset button are you pressing the one with the check mark. This process requires you to press two different buttons on the panel and then press the lock and unlock buttons on the key fob for about 15 seconds or until you hear a beep.

Jul 08, 2017 | 2007 Chevrolet Tahoe

2 Answers

I have an athletic works stopwatch. All it says on the front is chronograph. I bought it at Walmart. It has 3 buttons on the top and one on the bottom. I can't find the directions. I can't get it to...


I have the same Athletic Works stopwatch. I just figured out how to turn off the alarm: press either of the two mode buttons (middle top, or bottom right) until you see the regular time displayed (the seconds will be changing, but nothing else, and nothing will be flashing). Press and hold the reset button (top left); while holding down the reset button, press the start/stop button (top right). Watch the bell icon on the display in the upper right corner; with each press of the start/stop button you will see the bell either appear or disappear. When the bell disappears, release the reset button. The alarm is now off.

Apr 14, 2010 | Watches

1 Answer

Printer not loading paper to print / error #3



1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off

1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

5) Turn off the printer.( it must be turn off)
then turn it on again.


Only in B) case you can enter into "service mode", in A) case or if have e.g. paper jam, or another error you CAN'T enter
the "service mode"
Try it

Jan 03, 2010 | Canon PIXMA MP150 All-In-One InkJet...

3 Answers

Samsung TV remote control


I HAVE THE SOLUTION TO THIS PROBLEM.

Confirmed with Samsung tech support. Problem is with remote. to fix, simple take the batteries out of the remote. Press and hold the UP Volume button for 2 Mintues (no cheating, it has to be at least 2 minutes), this Reset's the Remote Control. Put the batteries back in. Bob's your uncle. all fixed.

Sep 28, 2007 | Samsung TV Remote Control

1 Answer

Brother MFC-210C stuck in "please wait maintenance"


Press menu then start mono (b/w) then 4x arrow-up-button. Machine will be in maintenance-mode: What error code does the display show off?

Sep 24, 2007 | Brother MFC 210C All-In-One InkJet Printer

Not finding what you are looking for?
Sylvania SMPK4066  MP3 Player Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sylvania Audio Players & Recorders Experts

David Payne
David Payne

Level 3 Expert

14161 Answers

Tre Elkins

Level 3 Expert

643 Answers

The Knight
The Knight

Level 3 Expert

74468 Answers

Are you a Sylvania Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...