Question about Routers

1 Answer

Voice IP Can I use the Zyxel p-600 series modem as a bridge for my Linksys phone adapter

Posted by on

1 Answer

Re: voice IP - Routers


Posted on Feb 08, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a ZyXEL EQ-660R-F1 and a Linksys Wireless Router (B BEFW1154) that I'm trying to hook up. Can you tell me what I need to do?

Who is your ISP (internet service provider)? Anyway, it is possible to get your set up working. ZyXel is the DSL modem gateway and Linksys, your router/wifi. If you are able to get online by hooking up directly to the Zyxel, then it is possible to add the Linksys to the system.
Dont hook up the Zyxel to the Internet port of Linksys just yet. First you have to configure the Linksys by connecting your PC to it with a cable. Boot up the PC.
Open web browser and enter the address and hit enter. This is the default address of the Linksys. username = admin and no password. It is probably the same as the Zyxel which causes the conflict.
The first set up page may look something like this below.
Change the LAN IP address from to
Then click apply...From now on the Linksys IP address is
Now you can connect the Linksys internet port to the Zyxel. Reboot the Linksys and Zyxel.

Your PC should be on the internet after that. To check/setup wifi, you need to log back into the Linksys using the new adress x.x.2.1

Feb 15, 2013 | Zyxel Prestige 660R Router (91004397002)

1 Answer

Hello! I have a ZyXel Prestige 600 series modem and a TP Link TL-WR642G v2.0 Router. I need to access the routers' web based configuration page in order to set up WEP security settings, but when I...

Go into your Modems status tab and look under the device table subsection. it should list all the connections and there IP address.
Punch in that and you should be good.

Apr 16, 2011 | Zyxel (91-004-361002) Wireless Router

1 Answer

How do I bridge mode a ZyXEL 600 series ? help please

Try setting both internal and external interfaces to DHCP rather than static, or if you have legal static IP address put it on INTERNAL interface only.and leave external as automatic.

Feb 24, 2010 | Zyxel Prestige 650HW - ADSL Router...

1 Answer

2-Wire 3800HGV-B bridge mode

Hello my friend,
You can disable all routing functions for your Home Portal. I never advise this as a course of action as it typically causes more issues than it resolves - so procede at your own risk.

- use the button on the back to reset to factory state (hold for 30 seconds)
- browse to
- click on configure under broadband link
- set ATM PVC search to disabled
- set connection type to direct IP
- click on configure services under the advanced heading
- take note of the text under "If you want to connect to the gateway when it is in bridged mode"
- un-check the enable routing box
- submit your settings

Good Luck!

Oct 30, 2009 | 2wire HomePortal® 1800HW Router...

1 Answer

How can I setup my Linksys 54g v2.2, with my ZyXel 660r modem from embarq so that I can use my laptop with the routers wifi?

First of all you need to set you modem router to bridge mode. go to this link will explaine in more detail

remember to change the linksys router ip to or somthing different from the modem .
Hughes modems are all set to so simply setting the linksys router to default
you need to change the linksys router IP to somthing different

Oct 27, 2009 | Linksys Wireless-G WRT54G Router

2 Answers

How can i use as a second router to expand my

connect every wireles router to a modem with more output posibilitys ore conect to output from first wireles modem so you can chooce witch wireles modem wil connect to the laptop or pc

Aug 22, 2009 | Zyxel Prestige 600WH Wireless Router...

2 Answers

Zyxel modem and wrt54g modem

You need to put the zyxel p600 into bridged mode

Mar 26, 2009 | Linksys Wireless-G WRT54G Router

2 Answers

Lost disk

just go to .... search for the model # of your router, from there you will find all you would need :-)


Oct 23, 2008 | Routers

2 Answers

Internet connection speed of the Encore ENHWI-G2

if you're router is in the B+G setting, try setting it to the B setting, this is because the wireless adapter in the i-phone/i-touch uses only the B setting, sucks for most part.. but that got my i-phone working like a charm.. hope this helps

Jul 16, 2008 | Encore 802.11G WIRELESS LAN ROUTER...

1 Answer

Port forwarding

well to start, your connection would possibly be ADSL and your zyxel is set to provide DHCP address on your network, so its router capabilities could be turned on.

if this is true, you may need to rework the connection settings.

here's a recommendation:

1.set your modem to bridge mode (bridge only)
2.this will then be allowing your linksys to manage your DSL connection through PPPoE
3.after so, your linksys router should get a public IP address for an internet IP when you go to status tab (not an IP address starting with 192.168.1.xx)

after so, you may reconfigure your port-forwarding.

the reason why you will need to set your modem to "bridged" only is that if it is not, your zyxel's firewall is also turned on, provided that the linksys' firewall is always on. so even if you define which port will be opened on the router, it will still be blocked by the modem's firewall.

Jun 22, 2008 | Zyxel Prestige 660R Router (91004397002)

Not finding what you are looking for?
Routers Logo

Related Topics:

588 people viewed this question

Ask a Question

Usually answered in minutes!

Top Routers Experts


Level 3 Expert

18258 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers


Level 3 Expert

4327 Answers

Are you a Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides