Question about Konica Minolta Office Equipment & Supplies
I purchased a Minolta CF 3102 last August and it has run great but my recent problem is with the smear across the page. Is this a sign of a bad imaging unit? Anyone around Mooresville, NC?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 08, 2013 | Konica Minolta Minolta CF 2002 3102...
1. Loose connectors or failed PWB-C board.
Reseat all connectors and then replace PWB-C board (p\n 65FA-9360) if necessary.
2. Poor connection for the interface cable between
the MFP and scanner.
Reseat the MFP-to-scanner interface cable its a large molex cable with thumb screws to remove on the outside of case.(p/n
3. Failed PWB-F board.
Replace PWB-F board (p/n 4025-0103-27). Flash MFP with
most current firmware. The latest version firmware or system software is
available via the Konica Minolta Download if you need help with this write me back.
4. Incorrect scanner serial number.
Access service mode and select System Input. Verify the
correct scanner serial number has been input under Serial # Input.this is in Service mode. if you need help with this write me back
Nov 29, 2011 | Konica Minolta Minolta CF 2002 3102...
Jul 10, 2009 | Minolta CF2001 Copier
Apr 25, 2009 | Konica Minolta PagePro 1350W Laser Printer
184 people viewed this question
Usually answered in minutes!