Question about Samsung 61" Slim-Depth LED DLP HDTV
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: My Samsung rear projection 42"
THE USUAL PROBLEM THAT YOUR SYPTOMS GIVE ARE ASSOCIATED WITH THE STK392- 090 INTEGRATED CIRCUITS 2 NEED REPLACING, UNLESS YOUR VERY TECHNICALLY MINDED ITS A JOB FOR A TECHNICIAN,COST IN THE UK ABOUT £150-00
Posted on Aug 01, 2008
Ur convergence is dead,U know how to solder right?
Buy a convergence kit,use what in that kit.This website have the kit.Tv Repair World.com or Ebay.com.
Posted on Sep 30, 2009
Ur convergence is dead.U know how to solders?Must replaced 2 convergence ICS,and some or all it resistors.Buy a convergence kit at Tv repair world.com Tvrepairkits.com to repair it ur self.The shop will cost u $300 for parts and labors.
Posted on Mar 05, 2010
Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.
Convergence problems are very common on all Projection TV sets including Sony, Samsung, JVC, Philip Magnavox, Panasonic, Akai, Pioneer, Hitachi, Zenith, and others. You can get a convergenece repair kit from the link below.
Common Symptoms include....
Here is a quick test....
Using your original remote go-to the settings menu then goto the convergence section.
Try to adjust the red and then the blue convergence.
You should be able to move RED and BLUE in all directions - up, down, left, and right.
If you can't move them in all directions or cant move them far enough your convergence chips are bad and should be replaced. This is a common problem.
Note: If you TV has as flash focus or magic focus button only try pressing the button. If it fails to fix the convergence your need to fix it. See below for a solution
You will need to replace the convergence chips and possibly some convergence resistors and pico fuses.
This is a a fairly easy DIY job if you know what you are doing. If you have never done this before we would advise calling a shop or if you want to do it yourself get a complete kit with instructions and support from www.TvRepairKits.com
Posted on May 30, 2010
Thanks for using FixYa. The issue is with the convergence ICs going bad and needs to be replaced. It’s not a difficult job if you want to do this yourself, you should require some basic knowledge about soldering-resoldering components. To start with you’ll have to open the back of the unit and then replace the ICs(STK ICs) which are located behind the black heat sink and also check the resistors as if they are short the ICs might blow again after sometime. There are repair kits available which includes repair instructions with the parts, if you want to do it yourself you can buy and repair it yourself. Please do rate the solution if the issue is resolved or post a comment for further assistance.
Posted on Jun 06, 2010
Tips for a great answer:
Feb 13, 2016 | Samsung 9000 Series UN65F9000AF 65" 4K LED...
Feb 07, 2016 | Samsung HL67A750 67 in. TV
Dec 01, 2014 | Samsung UN60D7050 60 3D-Ready LED-LCD...
Jun 18, 2011 | RCA R52WH73 Projection Television
May 04, 2011 | Samsung PN50C430 50Inch 720p Plasma HDTV...
Try resetting the entire video/audio settings to default. The blur on the picture may indicate that your motherboard is going bad. Recently there was a customer who had the same problem. It was his board. When we tried the AV cables, the blur went away. We tried different HDMI cables and the blur was still there when using HDMI output. It wasn't the TV, and it wasn't the HDMI cables. It was the board going bad.
Try accessing the recovery menu 'safe
Press and hold the power button until
the systems shuts off. (wait 2 seconds)
Press and hold the power button again
until you here 3 beeps. Let go.
It should ask you to connect your
controller via usb and press the PS button in
the middle of your controller. There will be a menu with 6 options. Try 2-5.
Jan 22, 2011 | Sony Playstation 3 (PS3) Console
Aug 09, 2009 | Samsung HCL4715W 47" Rear Projection...
Aug 01, 2008 | Televison & Video
787 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: