Question about Lexmark X5150 All-In-One InkJet Printer

Open Question

I have a lexmark 5600-6600 series and it won't delete print job, so all my other print jobs back up for hours!!! Does anyone have any ideas on how to solve this problem?

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

manishsh
  • 269 Answers

SOURCE: lexmark 5600-6600 series delete print job

when you want to delete some print jobs command try to unplug data cable first then cancel print jobs this will sure help your query

This will help. Thanks please keep updated. please do rate the solution positively .Thank you for using Fixya

Regards
manish

Posted on Mar 25, 2010

ckret1
  • 1 Answer

SOURCE: lexmark 5600-6600 series delete print job

Trash the Lexmark 5600 series -kick it to the street, throw it off the roof (but not onto someone). They are all junk an excuse to sell printer ink. I can not get anyone to figure out how to fix mine. It will not delete one print job---eventhough it says "deleting" It's been deleting for over 48 hours. Thus no further ability to print off my email or any internet site.

Posted on Feb 22, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Only prints first job - can't delete from que


Please try this approach instead:

1. Browse to Start -> Run... and type in NET STOP SPOOLER (this will stop the print spooler service)

2. Browse to your windows\system32\spool\PRINTERS\ folder. You should see files there ending in .SPL and .SHD created around the time you tried to print - delete these files.

3. Browse to Start -> Run... and type in NET START SPOOLER (this will restart the print spooler service)

4. Double click the printer icon in the lower-right corner of your taskbar to examine your print job queue and browse to View -> Refresh.


I hope this information has been helpful.

Dec 20, 2011 | Lexmark X6170 All-In-One InkJet Printer

1 Answer

PRINTER WILL NOT PRINT THERE IS A JOB THAT WON'T CLEAR. I TRIED DELETING THE JOB AND ALL IT SHOWS IS THE JOB DELETING AND THATS WHERE IT'S STUCK


To clear the print queue from stuck print jobs, try this approach instead:

1. Browse to Start -> Run... and type in NET STOP SPOOLER (this will stop the print spooler service)

2. Browse to your windows\system32\spool\PRINTERS\ folder. You should see files there ending in .SPL and .SHD created around the time you tried to print - delete these files.

3. Browse to Start -> Run... and type in NET START SPOOLER (this will restart the print spooler service)

4. Double click the printer icon in the lower-right corner of your taskbar to examine your print job queue and browse to View -> Refresh.

Oct 02, 2011 | Lexmark X2500 All-In-One Printer

1 Answer

I have a Lexmark S504 wireless multifunction printer. I can print a test page but a can't print anything from any application. The Windows print page window comes up and if you click OK it appears to...


It could be a printer driver issue. Please follow the steps below to fix the problem.
First, clear the print queue from any stuck print jobs. You can do the steps mention - going to Services and stop the print spooler, delete the files in the spooler folder and then restart the service.
Second, delete the existing Lexmark Interpret S405 printer driver. On your computer, go to Start menu > Programs > Lexmark > Uninstall. After the uninstall process, reboot your pc when prompted.
Third, visit the Lexmark website to download and reinstall the Lexmark Interpret S405 printer driver. Select the version of your Windows operating system. Download and execute the file. Follow the instructions on your computer screen.
After the reinstall process is successful, try to print again to verify that the problem is fixed.

Sep 07, 2011 | Lexmark Interpret S405 Wireless All-in-One...

1 Answer

Printer won't print. I went to printer and it says there are 9 items to br pringted in queue but they won't print Printer says it is ready


Good Day Nanawhit!

That happens all the times when first print job encounter a problem and stops printing and it was followed by series of print jobs. Some reasons for stop printing could be a printer out of paper and printer not set as default printer.

The best way to fix it is to cancel all pending jobs. When print jobs window is cleared off pending print jobs, restart your PC and your printer. Then go to your printer and make sure it is the default printer.

After that try printing a test page. Once a test page is successful, you can now print as many as you want.

Jun 10, 2011 | Lexmark X2670 All-In-One Printer

2 Answers

Lexmark 5600-6600 series delete print job


when you want to delete some print jobs command try to unplug data cable first then cancel print jobs this will sure help your query

This will help. Thanks please keep updated. please do rate the solution positively .Thank you for using Fixya

Regards
manish

Mar 25, 2010 | Lexmark X5150 All-In-One InkJet Printer

1 Answer

Stops after printing 1 job


A reboot likely fixed this problem already, or at least freed up the corrupted print job enough to be able to delete it out of queue.

However, if this is a reocurring problem, a corrupted printer driver could be the cause. Try reinstalling the drivers.

Jun 09, 2009 | Lexmark X6170 All-In-One InkJet Printer

1 Answer

I have a Lexmark 2500 series printer. There is one printing job that I try to cancel. When I chose the cancel option, the status of that job changed to deleting... and has been like that for the last 24...


Hi,
I assume you've turned everything off and back on again, including the printer and the job is still stuck.

For windows XP,
click on the start button, click on run
type
net stop spoolsv
click OK
wait 30 seconds
click on the start button, click on run
type
net start spoolsv
click OK
Open the printer and refresh the print queue, has the job cleared?

If not we will need to clear the temporary spool files from the spool folder.

click on the start button, click on run
type
net stop spoolsv
click OK

The usual path to the spool folder is
C:\WINDOWS\system32\spool\PRINTERS,

Delete the files in this folder only, if you are not sure do not delete them.
Close this window.

click on the start button, click on run
type
net start spoolsv
click OK

Alternatively, if you are comfortable using the run command, do the following in sequence. Be very careful what you type *.* means everything in the folder.

net stop spooler
del %SYSTEMROOT%\system32\spool\PRINTERS\*.* /q /f
net start spooler

/Q - for no prompt
/F - to force the deletion

Dec 02, 2008 | Lexmark Office Equipment & Supplies

3 Answers

X5150 and Vista print issue


I am posting this in hopes of helping others that are having issues with the Vista print spooler. In my case, I have an HP Pavilion laptop running Vista connected to a wireless hub. I also have a Minolta Konica 2300DL printer that is connected to the network via the wireless hub as well. Ever since obtaining this laptop, I have not been able to print to the printer other than stopping and starting the print spooler to obtain a single print 'job'. After about six months I found a post that contains the fix - I cannot take credit for it! Follow these instructions to get your printer to work:

1.) Go into control panel - I would suggest classic view as it is a little easier to navigate.

2.) Then go into User Accounts.

3.) From User Accounts go into Turn User Account Control On or Off

4.) UNCHECK Use User Account Control (UAC) to help protect your computer.

5.) At this point you will probably require a reboot.

Once this exercise is complete, you should be able to print. One more item off of my Honey DOO list!!!!!

Jul 24, 2008 | Lexmark X5150 All-In-One InkJet Printer

1 Answer

Lexmark X2350 printer problem


Usually the light blinks if you have started a print job and run out of paper...it's trying to get your attention to insert more paper before it can continue. Check and see whether there are any print jobs that weren't able to conclude and delete them. Go to 1) Start, 2) Control Panel, 3) Printers and Other Hardware, 4) View Installed Printers, 5) Lexmark 2300 Series. When you double click on the Lexmark Printer Symbol, it will open up a smaller window which will show you whether there are any print jobs that are waiting to print. If there are any, delete them. Hopefully this will solve your problem.

May 08, 2008 | Lexmark X2350 All-In-One InkJet Printer

Not finding what you are looking for?
Lexmark X5150 All-In-One InkJet Printer Logo

Related Topics:

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...