Question about UPS Battery Backup Systems

1 Answer

Mouse not working

Keyboard works but mouse doesnt work. However, when i press the reset button on the reciever the green light blinks for a few secoinds. While the light is blinking the mouse will work but the light stops blinking and then the mouse stops working.

cant get mouse to work only the keyboard

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 383 Answers
Re: mouse not working

Mouse not being detected in Windows 9x, ME, 2000, XP, or Vista. If the other mouse works in this computer attempt to use the mouse not working in another computer.

How to navigate Windows using a keyboard. Not only does this help users who do not have access to a mouse, it can also save you a great deal of time when working with text documents.

Autoexec.bat and config.sys help and instructions If the mouse drivers are not loaded properly you will not have the .... line is the name of the CD-ROM driver on the particular system we are working on.

Good Luck/Please dont for get to Vote.Thank You

Posted on Dec 19, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a UPS Intex 1500 And it just doesnt work.. The green (which says normal) is just blinking please help

if there is a reset button , press that
if that doesn't work, there is every possibility that the battery/s are shot
if the battery/s is expanded or the case is split replace all the batteries
some units have the 1 battery while others have 2 connected in series
If that is the case go to a battery shop with yours as samples as the space they fit in is limited

Apr 24, 2016 | UPS Battery Backup Systems

1 Answer

APC UPS 750 blinking green light

A blinking green light indicates it's on battery.
Possible Causes:
  • Your power is out
  • a breaker/fuse is tripped/blown
  • the outlet is otherwise not working (GFIC?)
  • The cord is unplugged.

Oct 15, 2014 | UPS Battery Backup Systems

1 Answer

Blinking lights

The problem is, is that while the unit is not overloaded (too much plugged in) either the batteries are close to failure, OR more likely you have so much plugged in you have less than 2 minutes of runtime.

Try removing some devices, lower the load. The row of green lights on the left is your load level indication, you want no more than 4 lit usually, 80% load is the most recommended. This will allow more runtime and should stop the flashing.

The flashing is just ment to alert you to less than two minutes of runtime.

If you have 80% load or less, and it still flashes, press and hold the on/test button until it clicks over to battery, the unit will now run a self test and switch back to main power after a few seconds and it should stop blinking.

If you want a copy of your user manual, you can find it here: (the Smart-UPS 1000)

Apr 08, 2010 | APC Smart-UPS 1000VA UPS System

1 Answer

Quite awhile ago, one side of the unit went dead. Uesterday, after hearing a couple clicks, the unit will beep a few short beeps, then after a little bit, there will be a few short beeps again. I press the...

sounds like it is failing. When was the last time you tested its capacity? Test it to see how long the battery works. If it doesnt then get a new one or send it back where you got it.

Mar 09, 2010 | CyberPower 525SL (CPS525SL) UPS System

2 Answers

Smart UPS 1500 - battery level green lights blink on and off

You need to run recalibration on the unit.  The supplied PowerChute software & cable will allow you to do this if you hook the UPS up to a PC (I know it works with the serial cable, not sure about USB).  If you only have a MAC then I cannot offer a solution other than to buy the standalone PowerView device from APC.  It will cost a bit more than a battery, but may save you from buying needless batteries in the future.  I finally broke down an bought one, but note that I was still having the problem after the 1st recalibration.  By trial and error (and maybe a vague memory) I put my MAC in sleep mode, that dropped the load to stop the lights from flashing.  Then I recalibrated with a 22% load and now it finally seems better (lights no longer flashing).  This was with a Smart-UPS 1000.
Let me know if that helps.

Apr 01, 2009 | APC Smart-UPS 1000VA UPS System

1 Answer

Fujitsu mouse

Yes I did.

After checking cables and batteries etc. I found out that there is a reset button/hole on the mouse which when pressed reactivates the mouse and makes it seen as a new device and hence it works again.

hopes this sorts your's out



Sep 24, 2008 | UPS Battery Backup Systems

3 Answers

Ikasu wireless keyboard and mouse

Hi I have IKASU W-K-with trackball. I run Vista i just pluged it in and windows found the drivers.I allso run Driver Detective.Hope this helps.dave

Jun 29, 2008 | UPS Battery Backup Systems

1 Answer

Viewsonic keyboard model # KBR0305

Does the keyboard have a "Connect" button on the bottom? Press it.

Mar 04, 2008 | UPS Battery Backup Systems

Not finding what you are looking for?
UPS Battery Backup Systems Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top UPS Battery Backup Systems Experts

Jax Planet
Jax Planet

Level 2 Expert

921 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you an UPS Battery Backup System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides