Question about Alpine CDA-7840

1 Answer

How do you set the time on a CDA-7840 car stereo?

Posted by on

  • Tim Degenstein
    Tim Degenstein May 11, 2010

    Setting Time 1.Press and hold the CLK (Clock) button for at least 3 seconds while the time is displayed until the time indication blinks 2.Rotate the MODE (Audio Control) knob to adjust the hours while the time indication is blinking. 3.When the hours has been adjusted, press the MODE (Audio Control) knob 4.Rotate the MODE (Audio Control) knob to adjust the minutes while the time indication is blinking. The time is automatically set 5 seconds after the minute adjustment. The time can also be manually set by pressing the MODE (Audio Control) knob. This is owners manual linkhttp://vault.alpine-usa.com/products/doc...

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,126 Answers

Posted on Sep 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Setting up ipod to CDA-9885R


The ipod cable plugs into the rear of the stereo. Here is a link to the installation manual:
http://vault.alpine-usa.com/products/documents/CDA-9885%20OM.PDF

Aug 23, 2012 | Alpine CDA-9885 CD Player

1 Answer

I've got a 1988 Dodge Ram and I know nothing about Car Stereos


go down to a electronics shop (future shop or best buy) and they will have a connector that will fit the original plug. Some splicing will be required but its all color coded with the deck
hope this helps

Nov 15, 2009 | Alpine CDA-7840

1 Answer

Alpine cda7840 not working


sorry in wrong area. While I am here did u find a solution for this problem? I am having same problem. Please tell me how I can fix this problem. Thanks Bunches

May 10, 2009 | Alpine CDA-7840

1 Answer

Set time


just hold one of the numbered buttons while the stereo is on (i think 6) than it will start blinking. spin the volume than press the volume to go to the minutes.

Jan 05, 2009 | Alpine CDA-9851 CD Player

1 Answer

Finding treble and bass adjustments on my stereo


Here is a manual for the radio. If you go to page 14 it will tell you how to set the EQ.

http://vault.alpine-usa.com/products/documents/OM%20CDA-9835.PDF

Good Luck Please Rate FixYa!

Dec 19, 2008 | Alpine CDA-9835 CD Player

1 Answer

CDA-9855R - Sound setting constantly changes


It's possible the stereo is in some sort of "demo" mode. To verify this setting, go to Menu-->Demo and set it to "Off".

Feb 18, 2008 | Alpine CDA-9855 CD Player

2 Answers

Instaling alpine car/cd stereo cda 9807


Its probably your wiring harness that came with the stereo. Which can cause many more problems. alpine changed their wiring harness around that time. But they used the same plug, just wired different. So now there are crossed wires, but the plug fits, causing the amp chip to fry. maybe even further than the amp chip. an amp chip replacement runs about 80$ at a repair shop. if its just that.

Nov 18, 2007 | Alpine CDA-9807 CD Player

1 Answer

Alpine CDA-7840 works but does not light up for about half an hour


I have the exact same problem and it has been driving me nuts for several years now.  I have tried everything with no luck.  I finally resorted to buying a used faceplate on eBay (and they had several available so I suspect this is a common problem).  I will let you know how it turns out.

Nov 11, 2007 | Alpine CDA-7840

1 Answer

Alpine CDA-7840


Some 4-Runners have a factory system that uses a separate amplifier to power the rear speakers. In this case you need to activate the amplifier using the blue/white remote output from your Alpine deck. It sounds like the wire that activates the amplifier is currently attached to the deck's blue "power antenna" output, so that the amplifier is only on when the tuner is selected. Disconnect whatever is attached to the blue wire behind the deck, and attach it to the blue/white wire instead. That should solve the problem.

Jun 09, 2007 | Alpine CDA-7840

Not finding what you are looking for?
Car Audio & Video Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alpine Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4848 Answers

Tygh Duval
Tygh Duval

Level 2 Expert

300 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you an Alpine Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...