Question about Televison & Video

1 Answer

Need 4 digit password for rca tv 2003

I have a rca tv year 2003 and the problem is that when i turn it on and try to see a channel it says to enter a 4 digit password to unlock the tv, but i dont know what the password is.

Posted by on

  • Anonymous Mar 17, 2014

    tevion tv - you need to enter the 4 diget password to change channels

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 101 Answers

Most RCA and GE TV sets use a four digit code to control the v-chip. The code reset procedure is different depending on the model. Try each method until you find one that works:

  1. Hold down MENU on the remote and VOLUME DOWN on the TV it’s self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the 0 on the remote and the VOLUME DOWN buttons on the TV its self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds.
  4. Hold down GO BACK on the remote and MENU on the front of the TV at the same time for at least 4 seconds.
  5. Hold down EJECT on the front of the TV and the MENU button on the remote at the same time for at least 4 seconds.
Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.

Posted on Sep 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an 32 rca t.v my son has locked and won't


I got this from the manual. Page 26.

Press MENU to see the main menu.

Press CH+ or CH- to highlight preferences.

Press OK to enter the preference submenu.

Press CH+ or CH- to highlight Par. (Parental) Control.

Press OK. Enter Password will appear on the screen.

If you want to set a new code, go to steps 6-8 directly. (You can press the number buttons to enter a four-digit code. The code "0000" is the default password. If you have not set a code previously, then "0000" is the code.)

Resetting Your Password

Press VOL+ on the remote and the CHANNEL + on the front of the TV at the same time. Enter New Pwd. will appear on the screen. (You must be in the Enter Password screen when attempting this.)

Press the number buttons to enter a four-digit code. The code will appear on the screen as you enter it.

Press OK to save the code.

Press MENU repeatedly to exit the menu or the menu will automatically disappear within a few seconds if no buttons are pressed on the remote control.

If you need more, get the manual here:
http://www.retrevo.com/support/RCA-32V432T-TVs-manual/id/402ci372/t/2/
Pages 25 through 30 are all about lock and channel/show blocking.

Jun 05, 2012 | RCA Televison & Video

1 Answer

Need the code for rca tv


Hello
Three digit univeral remote codes for RCA TV are:
000/ 003/ 004/ 005/ 007/ 009/ 011/ 048/ 078/ 082/ 083/ 094/ 096/ 098/ 099/ 101/ 102/ 103/ 107/ 113/ 129/ 133/ 167/ 179/ 181/ 187/ 188/ 194
Four digit universal remote codes for RCA TV are:
0031 0004 0048 0054 0094 0100 0102 0107 0129 0191 0005 0009 0000 0162 0163 0342 0003 0015 0022 0096 0113 0125 0179 0187 0188

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

Jun 28, 2011 | RCA Televison & Video

1 Answer

I have a rca modle 20f420t modle lost remote so bought a sony unaversal one but i need the manufacturer codes and cant find them


Hello
I do not find code for RCA tv to Sony universal remote. Anyway I send you three digit codes for RCA herewith. Just try with entering these numbers. I'm not sure will it work or not.

RCA tv has been listed in Radioshak 6-in one Universal Remote Manual.

RCA Codes: 000/ 003/ 004/ 005/ 007/ 009/ 011/ 048/ 078/ 082/ 083/ 094/ 096/ 098/ 099/ 101/ 102/ 103/ 107/ 113/ 129/ 133/ 167/ 179/ 181/ 187/ 188/ 194


SONY Codes: 002/ 006/ 071/ 128




Direct Code Entry

  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.



Nov 25, 2010 | RCA 20F420T 20" TV

1 Answer

I LOST MY PROGRAMING INSTRUCTIONS AND CODES FOR MY TV THE MODEL OF MY UNIVERSAL CONTROL IS RCR4358 ITS A RCA


The code list is located at the following website: http://www.revoxremotes.com/Remotes/RCA_R55L8_Codes.pdf
Find your TV and hold the TV button on the top left. While holding the TV button, enter in a 4 digit code (they should be in the 1000's) - then release the TV button and try the channels or volume up or down
EXAMPLE: TV(1047) release TV button
- try all 4 digit codes associated with your TV
- once the code is entered, try it by clicking channel up or down
- hope this helps, this can be frustrating
- If the remote responds, stop trying codes, your remote is programmed
- WRITE DOWN THE NUMBER FOR YOUR TV WITH A SHARPIE ON THE REMOTE ITSELF THIS WILL PREVENT FURTHER WASTING OF TIME

Feb 06, 2010 | RCA 4-in-1 Universal Remote Control

1 Answer

Parental Level of the Player


Ok the default code is 0000 try that

The manual says
Resetting Your Password
Press VOL+
on the remote and the
CHANNEL + on the front of the TV at
the same time. Enter New Pwd.
will
appear on the screen. (You must be in the
Enter Password screen when attempting
this.)
Press the number buttons to enter a
four-digit code.
The code will appear on
the screen as you enter it.
Press OK to save the code.
Press MENU repeatedly
to exit the
menu or the menu will automatically
disappear within a few seconds if no
buttons are pressed on the remote
control.


You can also leave the TV unplugged for 4 hrs and do a hard reset.

If you would like the manual leave your email and I will send it.

May 06, 2008 | RCA TruFlat 27F520T 27" TV

1 Answer

RCA 27" home theatre, parantal controls


You need a remote a $7 GE universal will work good.

Resetting Your Password
Press VOL+
on the remote and the
CHANNEL + on the front of the TV at
the same time. Enter New Pwd.
will
appear on the screen. (You must be in the
Enter Password screen when attempting
this.)
Press the number buttons to enter a
four-digit code.
The code will appear on
the screen as you enter it.
Press OK to save the code.
Press MENU repeatedly
to exit the
menu or the menu will automatically
disappear within a few seconds if no
buttons are pressed on the remote
control.

May 04, 2008 | RCA TruFlat 27F520T 27" TV

2 Answers

RCA f20580wn 20" TV about 20 years old


Hopefully you have the problem solved.

If not, the RCA plugs, listed as input 1 and 2 are shown on channel 91 and 92.

I recommend connecting the DVD to either input. Turn on the DVD. Then run the auto programming function of the TV. It will find and program the channel for the DVD. Then use the channel up or down on the remote you are currently using and you should find a working DVD.

Hope this helps.

Rcs97

Apr 07, 2008 | Televison & Video

1 Answer

Televison problem


Have you had any storms come around recently? This sounds like the EEPROM IC is corrupt and probably needs to be changed. If you know how to solder maybe you can change it your self. If your not good at soldering then you can have a pro assist you with this repair Good Luck

Jul 24, 2006 | RCA 27F530T 27" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Cindy Wells

Level 3 Expert

5096 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...