Question about Kenwood DPX-4020 CD / Cassette Player

1 Answer

WHAT IS THE SECURITY COOD OF DPX8000MJ - Kenwood DPX-4020 CD / Cassette Player

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 101 Answers

KENWOOD SECURITY CODE CLEAR procedure

Your radio will require one of the following procedures.

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears).
Then using your remote enter your code.

Type 2
Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".

The code is KCAR BUT its how you use the code whether it works or not the first thing you have to do is have a remote-Will not work without remote,....Turn on unit and the screen will come up for password..using remote press 5 two times,wait 2 seconds and press enter,NOT track up press 2 three times wait 2 seconds press enter,press 2 One time wait 2 seconds then enter and finally press 7 two times and press enter! your screen will be unlocked if you did it right,If you have to try again turn off and then back on.AGAIN

to reset password
using your remote enter your code.

Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display.
Then using your remote, enter your code.

Enter your number from the remote control unit. Your code number is 5227 (KCAR)

* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key
* Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key

The security is canceled and the set enters the TUNER mode!

Posted on Sep 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My phon lock nokia 701 seecurity cood pleese send


you need to reinstall the phone firmware in order to clear the security codes.

Oct 16, 2013 | Cell Phones

1 Answer

Forget securete cood for restor my phne nokia6500s


You may try default phone and security code to remove restrictions.
ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000

Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

Nov 11, 2012 | Cell Phones

17 Answers

HOW TO UNLOCK SECURITY CODE OF NOKIA 2690


Hello Amit,

Switch off the Nokia 2690 Cell Phone. Remove the battery for 30 minutes. Reinsert the battery and switch on the Nokia 2690 Cell Phone. Enter the default code 12345 or 00000. Your Nokia 2690 Cell Phone will be unlocked.

Jun 05, 2011 | Nokia 2690 Cell Phone

1 Answer

Please give puk cood


A request for a PUK code ("Personal Unlocking Key") will appear on your phone if your SIM card PIN code is entered 3 consecutive times incorrectly.

Your SIM card will then become "PUKed" or Blocked. This is a security measure to protect your service.

You need to call the Customer Service department of your cell phone provider and they will give you the PUK code which will unblock your SIM card.

Feb 18, 2011 | Nokia 2690 Cell Phone

1 Answer

I forget my phone cood.


You may try default phone and security code to remove it
ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000
Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

Sep 19, 2010 | Nokia 5310 Cellular Phone

1 Answer

How to Rejet a Yamaha V Star 1100


unlook thish my 1100 security cood plzzzzzzzzzzzz

Sep 09, 2010 | Nokia 1100

1 Answer

I forget my security cood


A lot of sites do unlock but there is this site I used couple of times and it pays best since I've been unlocking phones.
You get full money back guarantee.
Visit http://www.mobileunlocked.com/index.php
and just follow the site prompt.
Good luck and remember to rate this solution
if u need Soft reset code *#7370# Hard reset code *#7780#

Aug 16, 2010 | Nokia N73 Cellular Phone

2 Answers

Unlock security code for n76 phone


Visit http://www.unlockme.co.uk/master.php
Input your phone imei number to generate a Master reset code for your handset.

That fixes it.

Rate this fixya.

Jun 02, 2009 | Nokia N76 Cellular Phone

1 Answer

Wireless Cood


You can put in your wireless code by connecting to the DI-524 using the LAN cable. Open you web browser (Internet Explorer) on your computer, and type in the address http://192.168.0.1 This should take you to the sign on screen for your DI-524. user ID will be "admin" and password is blank unless you have changed it. Go to the "Wireless" button on the left. There you can specify the type of wireless security you want and the secret code. The most simple security is WEP, with 64bit WEP encryption, and "Open System" authentication. Enter a 10 digit numeric code in "Key 1". You don't need to fill our the other keys. NOTE the number down for future reference.

Jan 09, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

I need viewsatusa VS2000 cood


it took me quite a while to disseminate what a cood was

Apr 13, 2008 | Zenith ZN8TS LCD Touchscreen Remote...

Not finding what you are looking for?
Kenwood DPX-4020 CD / Cassette Player Logo

389 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4834 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...