Question about Garden

1 Answer

Looking for a parts supplier to source Murray push mower 22'' deck

Looking for a parts supplier who can source Murray (Briggs & Stratton) Mower deck p/n 7501004MA which is for a push, mulching, side or rear-discharge, high rear wheel 22'' model. Would accept an unrusted used deck, as well.

Posted by on

  • Chuck
    Chuck May 11, 2010

    Unless you can find a good used one locally for cheap, you would be better off to purchase a new mower. After you pay shipping and handling charges plus $100 to $150 for the part new, plus figuring your time to change everything over, you will have a lot of money in a used mower. JMHO I went to the Murray parts site and the P/N you posted in not a good part number. It may be obsolete or it may be an incorrect number



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 437 Answers

Well I have looked at my suppliers and they are showing it no longer available. So you may have to search around and find an old murray mower that no one is going to fix but has a good deck. good luck.

Posted on Sep 29, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Who stocks spare cutter decks for a murray sentinel 30" ride on mower

check with a Murray or Briggs & Stratton dealer for avalibility, Have model I can check for ya. Murray went out of biz and was took over by Briggs 5-7 years ago. If ya find one you may not like the $$

Sep 04, 2011 | Garden

1 Answer

22" Murray Lawn mower cable-PN

murry uses briggs and stratton mowers, you can call them Phone: +1 414 259-5333 in wisconsin, and ask them for the part

Jul 08, 2011 | Kitchen Ranges

1 Answer

Need manual for Murray 20" cut 3.5 hp Classic push

This engine is one of Briggs & Stratton`s basic engines, quite a simple engine, post your problem and i`ll answer,
If you really feel that you need a manual they are available through some outlets, try Wal Mart. or ebay

Jul 03, 2011 | Briggs & Stratton Garden

1 Answer

I have a scotts mower 21595x8b with a loose spring/wire who goes from speed control mechanical stick to rear of the engine,no start

The lawn mower you have was manufactured by the Murray Company, which has been purchased by Briggs & Stratton. For parts and service, you can contact the Murray Division of Briggs & Stratton at 800-258-5011

Hialry @Scotts

May 02, 2011 | Garden

3 Answers

Murray riding mower 12.5 hp briggs & stratton spitting oil & gas out of carb & muffler when trying to start

Drain oil... it is full of gasoline due to a bad float pin and rubber gromet in your carb. When your float pin and gromet fail, gas just keeps flowing into your carburetor, eventually flooding your motor with gas and oil mix.

Jul 07, 2009 | Craftsman 17.5 hp 42 in. Deck Lawn Tractor...

1 Answer

What spark plug should be used for a Murray Quantum XNP 6.5hp mow

Home Depot has the plug you need for briggs 6.5hp engines. Don't worry about it being a Murray. Buy a Briggs 6.5hp plug.

Jun 26, 2009 | Garden

2 Answers

Replacement part for Craftsman 650 Briggs & Stratton 22" multi cut mower Model #917.376741

You first need to locate the model number on the mower, not the Briggs engine. Then go to and enter your model number on the right side of the web page. This will take you to a list of parts for your mower. Your model number should be located on the deck of the mower (you didn't say if it was a rider or a push). Rider model numbers are located on the rear of the body behind, on or under the seat. Push model numbers are found on the back of the deck between where the handles attach to the frame.

May 25, 2009 | Craftsman Garden

Not finding what you are looking for?
Garden Logo

Related Topics:

437 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers


Level 3 Expert

708 Answers

john h

Level 3 Expert

14548 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides