Question about Canon PowerShot A610 Digital Camera

Open Question

I have a Powershot A610 that won't power up. It was dropped off the counter yesterday. I changed the batteries but its still not working. Any suggestions?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: powershot a610 will not power on

Junk in the usb mini connector could be shorting the main board out. Try a can of electronics duster in the port. Cheers!

Posted on Oct 03, 2007

t00nz
  • 4738 Answers

SOURCE: PowerShot A95 does not power on

Here are some simple things to try first for a camera that won't power on. They won't work for every case, but they're worth a try:
http://camerarepair.blogspot.com/2007/11/simple-fix-for-dead-cameras-that-wont.html

Posted on Feb 08, 2008

  • 1 Answer

SOURCE: Canon Powershot A610 won't power-up

My camera stopped working some time later after being dropped.
If you are brave (or desperate), try this... I found it was not too difficult to open the camera up. Take all the screws from the bottom, sides and under the card and usb, and inside the battery compartment. They are all different lengths so keep some record of what goes where. Then I made sure the multiway connector underneath the top was firmly in place. That was all I could see that I could fix myself. And what luck! when I put it back together it worked.

Posted on Aug 13, 2008

t00nz
  • 4738 Answers

SOURCE: My canon powershot a570 is not powering on despite changing the batteries. Any suggestions?

Here are some simple things to try first for a camera that won't power on. They won't work for every case, but they're worth a try:
http://camerarepair.blogspot.com/2007/11/simple-fix-for-dead-cameras-that-wont.html

Posted on May 23, 2009

  • 1566 Answers

SOURCE: Canon Powershot a610 dropped, lens stuck half way,

Hello there,
The E18 error is related to the LENS not able to retract fully. If it is still under warranty, I would advise you bring it to the nearest service center. This is to avoid further damages. Otherwise, you can try a few things below.
There are a couple of things you can do.
1. Turn it on and then off. Spray canned air around the lens.
If trick 1 will not work out, try this.
2. Make sure the battery is fully charged. Turn on the camera and then give it a couple of firm whacks on the side. Make sure nothing is blocking the lens and wait for it to fully retract.
Let me know how it goes.

Posted on Apr 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon power shot A610, will it support sundisk 16GB?


No. The A610 works with MMC and SD cards, 2GB or smaller. It will not work with higher-capacity SDHC cards.

Dec 21, 2013 | Canon PowerShot A610 Digital Camera

1 Answer

Cannon A610 shuts off when i push button to take photo


OK, long shot, but you never know. Press the top cover dowsn when you shot a photo. If camera is not powered off, then fasten the 3 screws that you may find at the top of the batteries housing unit.

Feb 21, 2012 | Canon PowerShot A610 Digital Camera

1 Answer

My Power Shot SX130 IS wont turn on... I dont know why, yesterday was working and all the sudden today I tried to Power On and doesn't do anything. I changed the batteries .... HELP!



Things to check first for a camera that won't turn on are battery contact points, and micro switches that are located on the battery and memory card doors. Troubleshooting tips on other things that need to be checked may be seen here. These tips won't work for every case, but they're worth a try.

Jul 11, 2011 | Canon PowerShot SX130 IS Digital Camera

1 Answer

I have a canon powershot A40. I've attached the camera via a USB port to my PC. I am trying to use Zoom Browser EX to import pictures to the PC, but am receiving a message that the camera does not work...


Try NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program.

Oct 12, 2010 | Canon PowerShot A40 Digital Camera

1 Answer

YES HI my cam will not turn on. its a powershot a610 cannon cameria


Things to check first are battery contact points, and micro switches that are located on the battery and memory card doors. Details on what needs to be checked may be seen here. It won't work for every case, but it's worth a try.

Apr 10, 2010 | Canon PowerShot A610 Digital Camera

1 Answer

My A610 powershot getting on and off on its own.


Water and electronics do not mix. It may not be fixable. :(

Jun 17, 2009 | Canon PowerShot A610 Digital Camera

1 Answer

Canon Powershot A610 won't power-up


My camera stopped working some time later after being dropped.
If you are brave (or desperate), try this... I found it was not too difficult to open the camera up. Take all the screws from the bottom, sides and under the card and usb, and inside the battery compartment. They are all different lengths so keep some record of what goes where. Then I made sure the multiway connector underneath the top was firmly in place. That was all I could see that I could fix myself. And what luck! when I put it back together it worked.

Jul 02, 2008 | Canon PowerShot A610 Digital Camera

3 Answers

Replacing a part on my Canon PowerShot A610 Digital Camera


you will need a #0 screwdriver. 1. remove the screws on the sides two on one side three under the Digital/dc in / av out 2. removed the screws from inside the battery compartment three total screws Cheers! PS these are small screws. Work in a well lit area!

Sep 08, 2007 | Canon PowerShot A610 Digital Camera

1 Answer

Powershot a610 will not power on


Junk in the usb mini connector could be shorting the main board out. Try a can of electronics duster in the port. Cheers!

Aug 13, 2007 | Canon PowerShot A610 Digital Camera

Not finding what you are looking for?
Canon PowerShot A610 Digital Camera Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

168 Answers

old marine
old marine

Level 3 Expert

1923 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...