Question about Sony FD Trinitron WEGA KV-36FS120 36" TV

2 Answers

I have a sony Trinitron WEGA TV. Model KV36FS120. I have no sound and no picture. The stand by timer LED blinks 9 times, pauses, then blinks 9 more times. I understand this is a code. What does this mean?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 178 Answers

9 blinks is a zero crossing detector fault. This is caused by a malfunctioning detection circuit located on the G board. I have not seen many of the 32" models have this problem. But if you were going to get it repaired the repair should not be cost prohibitive somewhere in the 150 dollar range. It is usually a diode in this circuit that has changed it's specifications, the diode it's self will not test bad but the unique function it supplies to the circuit will malfunction because of this shift. Normally i see this on the 57" big screens and not the direct view, but both use the same power supply and use the same error diagnostics.

Posted on Oct 10, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sony Master
  • 8,457 Answers

Ur high voltage is dead.FBT,the flyback transformer it dead.The big block of plastic with a red wire with a
cap hook to CRT(ur tv tube).

Posted on Sep 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our Trinitron KD-27FS170 Tv will not turn on. It sounds like it is turning on/off but no picture or sound. The Stand-by/Timer red light is flashing 4 times, pause, then 4 times, etc.


This typically means you have a bad capacitor, you can inspect for any swollen or bulging capacitors however unless familiar with desoldering boards best leave it to a repair technician.

Jan 13, 2015 | Sony FD Trinitron WEGA KD-27FS170 TV

1 Answer

Black screen model kv-27fs200 there is sound just no picture stand by light blinks 4 times the pauses and does it again


4 times standby light blink shows problem in vertical deflection section of TV.
Please check and replace vertical output IC in main board.
Thanks.

Dec 27, 2009 | Sony FD Trinitron WEGA KV-27FS200 27" TV

1 Answer

Sony Trinitron---Blinks 9 times, won't come on!


A specific model number will probably get you more specific
help.. but if you check around the internet by model number
you will likely be presented with some SERIOUS PART opportunities...

The FASHING LIGHT means you have a hard fault in the power circuits...

The number of flashes is mean to point you to a specific area...

I gave all my big flat screens away in favor of the new
HD stuff... (certainly less reliable than those Sony sers...

Shopjimmy might be a great place to call... but the MODEL NUMBER is a MUST.


TV Parts Universal TV Stands DLP Chips ShopJimmy

May 18, 2017 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

My sony TV wont turn on.


Un plug and let stand for one minute. If it still does blink then use the reset on the remote and press it while pressing the power button on the TV.

Jan 19, 2009 | Sony FD Trinitron WEGA KV-32HS510 32" TV

1 Answer

Sony Trinitron KV-32fs120 Does Not Turn On


i have a unvirasal remote how do iget the codes for it

Sep 29, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

2 Answers

Kv-32s120 standby LED blinking no sound or picture


How many times does the timer light flash between pauses?

Sep 05, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

4 Answers

SONY WEGA TRINTRON MODEL KV36FV15 RED LITE FLASHING


The model number is KV-36FV15 and blinking is constant no pause

Aug 01, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

SONY WEGA KV-32XL90E


Hiii...
what chassis your tv set ?

Thank's

[Vrya]

Jan 23, 2008 | Sony FD Trinitron WEGA KV-36XBR800 36" TV

1 Answer

SONY WEGA KV-32XL90E


Hallo, IC MCZ3001D is damage. Cost 30 Euro. Greatings from Germany

Jan 04, 2008 | Sony FD Trinitron WEGA KV-36XBR800 36" TV

1 Answer

Sony trinitron tv


If you have sound but no picture it means that your power supply and tuner are working correctly. The number of times the timer LED blinks is the code for the problem with the picture. The computer will stop the picture and blink the timer LED if the vertical circuit stops working, if the picture tube is too weak or if the horizontal sweep has stopped. The set should be serviced by a qualified tech familiar with Sony sets.

Sep 03, 2007 | Sony WEGA KD-34XBR970 34" TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-36FS120 36" TV Logo

390 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...